[Dutch] QGis measurement
b.j.kobben op utwente.nl
b.j.kobben op utwente.nl
Di Jun 9 02:00:05 PDT 2015
Jongens, voordat we bugs gaan verzinnen, RTFM:
"Measuring <http://docs.qgis.org/2.8/en/docs/user_manual/introduction/general_tools.html?highlight=measure#measuring>Measuring works within projected coordinate systems (e.g., UTM) and unprojected data.
If the loaded map is defined with a geographic coordinate system (latitude/longitude), the results from line or area measurements will be incorrect. To fix this, you need to set an appropriate map coordinate system (see section Working with Projections <http://docs.qgis.org/2.8/en/docs/user_manual/working_with_projections/working_with_projections.html#label-projections>).
All measuring modules also use the snapping settings from the digitizing module. This is useful, if you want to measure along lines or areas in vector layers.
To select a measuring tool, click on <http://docs.qgis.org/2.8/en/_images/mActionMeasure.png> and select the tool you want to use."
Barend
--
Barend Köbben
Senior Lecturer - ITC-University of Twente
PO Box 217, 7500 AE Enschede (Netherlands)
@barendkobben
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osgeo.org/pipermail/dutch/attachments/20150609/4af3d9a3/attachment.html>
Meer informatie over de Dutch
maillijst