<div dir="ltr"><div>Accuracy, budget, baseline length -- pick two.</div><div><br></div><div>In your case, keep the baseline as short as possible, </div><div>even if that requires setting up your own base station.</div><div>

Single-frequency receivers are fine if baseline length </div><div>is kept under a couple of km.</div><div><br></div><div><div class="gmail_extra">Signal obstructions are hard to avoid, but you can <br></div><div class="gmail_extra">

minimize their impact by tracking GLONASS </div><div class="gmail_extra">in addition to GPS. So that when a satellite drops, </div><div class="gmail_extra">you'd still have a couple locked on. RTKLIB can </div><div class="gmail_extra">

process GLO -- check if the receiver can track too.</div><div class="gmail_extra"><br></div><div class="gmail_extra"><div class="gmail_extra">Put the rover antenna on the roof of the vehicle </div><div class="gmail_extra">

(buy a cheap one with magnetic support).</div><div class="gmail_extra"><br></div></div><div class="gmail_extra">Those are the principles; I don't have any </div><div class="gmail_extra">specific hardware in mind, though.</div>

<div class="gmail_extra"><br></div><div class="gmail_extra">-F.</div><div class="gmail_extra"><br></div><div class="gmail_extra"><br><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-color:rgb(204,204,204);border-left-style:solid;padding-left:1ex">

Message: 1<br>
Date: Tue, 1 Jul 2014 13:24:33 -0500<br>
From: Nick <<a href="mailto:darknovanick@gmail.com">darknovanick@gmail.com</a>><br>
To: <a href="mailto:foss-gps@lists.osgeo.org">foss-gps@lists.osgeo.org</a><br>
Subject: [FOSS-GPS] RTKLIB Vehicle Accuracy<br>
Message-ID:<br>
        <CA+Qch=+<a href="mailto:q75PyGFP1rJALi1fK5ZaHFMuHmHPkXuROMJzVQxPCFQ@mail.gmail.com">q75PyGFP1rJALi1fK5ZaHFMuHmHPkXuROMJzVQxPCFQ@mail.gmail.com</a>><br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
Hello,<br>
<br>
I am interested in getting an RTK GPS setup working for a moving vehicle,<br>
not fast, perhaps 10 mph. I would postprocess the data collected later,<br>
using data downloaded from a nearby station.<br>
<br>
My desire is to log elevation data every few seconds as the vehicle drives.<br>
I hope to achieve 10-20 cm accuracy for the position and the elevation.<br>
<br>
As I research RTKLIB, it seems like most information I come across is<br>
regarding a static location. Is my goal feasible to achieve this kind of<br>
accuracy as the vehicle moves?<br>
<br>
If so, can anyone recommend a good board to get me started? I'm hoping to<br>
be able to do this for under $200 (just one receiver since the base station<br>
is public) -- please give me a reality check if this is unlikely. Thanks,<br>
<br>
Nick<br>
</blockquote><div><br></div></div></div></div></div>