<div dir="ltr">Hi there<div><br></div><div>First of all it sounds like your 6T works and I take it that is connected to a PC via COM(?). Is the Base connected to the same PC and if so what port and does the PC see it? Easy way to check is to load Putty,opening the port that the unit is connected to and seeing what you receiving from the receiver.</div>

<div><br></div><div>I would not enable RTCM3 on the Novatel receiver and keep it basic to start off with</div><div><br></div><div>Is your Novatel single or dual frequency?</div><div><br></div><div>Regards</div><div><br></div>

</div><div class="gmail_extra"><br><br><div class="gmail_quote">On Wed, Aug 27, 2014 at 2:25 PM, jtwork <span dir="ltr"><<a href="mailto:taflan.work@gmail.com" target="_blank">taflan.work@gmail.com</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hello,<br>
<br>
I have turned on both RXM-RAW and RXM-SFRB messages, and using RTKLib I can<br>
successfully get a SINGLE lock.  So far I can't get my base station to work<br>
in conjunction to get a real rtk fix.<br>
<br>
I'm using the Novatel OEMV-3.  I found that it outputs RTCM messages, so I<br>
tried enabling the RTCM3 messages 1002, 1006, 1007, 1008, and 1019, however<br>
when I try connecting to the Novatel as both a 'base station' and then later<br>
as 'correction', it does not ever find a fix beyond "SINGLE".<br>
<br>
I did previously try enabling the OEMV messages like RAWEPHEM that were<br>
listed as supported, but that didn't seem to work either.  I have also input<br>
the base station position information in the options.<br>
<br>
Any help with further configuration would be greatly appreciated.  I suspect<br>
that I might just have the wrong messages setup or have something wrong with<br>
my connection settings, but I am really not too sure at the moment...<br>
<br>
<br>
<br>
--<br>
View this message in context: <a href="http://open-source-gps-related-discussion-and-support.1099874.n2.nabble.com/Using-RTKLib-with-Novatel-OEM-device-as-base-tp7572967p7572970.html" target="_blank">http://open-source-gps-related-discussion-and-support.1099874.n2.nabble.com/Using-RTKLib-with-Novatel-OEM-device-as-base-tp7572967p7572970.html</a><br>


<div class="HOEnZb"><div class="h5">Sent from the Open Source GPS-related discussion and support mailing list archive at Nabble.com.<br>
_______________________________________________<br>
This message is sent to you from <a href="mailto:FOSS-GPS@lists.osgeo.org">FOSS-GPS@lists.osgeo.org</a> mailing list.<br>
Visit <a href="http://lists.osgeo.org/mailman/listinfo/foss-gps" target="_blank">http://lists.osgeo.org/mailman/listinfo/foss-gps</a> to manage your subscription<br>
For more information, check <a href="http://wiki.osgeo.org/wiki/FOSS-GPS" target="_blank">http://wiki.osgeo.org/wiki/FOSS-GPS</a><br>
</div></div></blockquote></div><br></div>