<div dir="ltr">Hi, I have a Ublox M8T which is setup in a logger configuration from OptimalSystem.de with a Tallysman TW2710. I have successfully connected the M8T to u-center_v8.18 and am able to log .ubx files.<div><br></div><div>I am interested in using RINEX data from a continuously operating GPS which is based nearby ( less than 2 km away ) and the data is available from the Ordnance Survey ( OS ) for download for a period. The data provided by the OS has the extension .15o and appears to be RINEX 2.11</div><div><br></div><div>I have downloaded RTKLIB 2.4.2p10 and using RTKCONV have created a .nav and .obs file from the .ubx produced by u-center. I have attempted to post process the .obs data in RTKPOST, I have entered the paths to the .nav file and the OS Rinex data in the middle section and a pos file is created.</div><div><br></div><div>I'm not sure I am using RTKPOST in the correct manner, should I be changing Positioning Mode in Options to another mode and placing the file path to the OS RINEX in the RINEX OBS: Base Station section?</div><div><br></div><div>Secondly should I be supplying an sp3 file from the IGS service or other online files to help improve the final data?</div><div><br></div><div>I am seeing a very small shift in positions in the pos file when providing the OS RINEX data but the Q value is always 5 ( single ). In my initial test the antenna was placed in a large Westerly facing window at ~58 degrees North for some hours where it had up to 7 GPS satellites in view.</div><div><br></div><div>Finally if I wish to capture the RAW data which the M8T produces and later use it in RTKLIB but not use u-center, what would be the best way of achieving this?<br></div><div><br></div><div>Many Thanks</div><div><br></div><div>James</div></div>