<div dir="ltr">Hi,<div><br></div><div>I am taking my first steps in RTKLIB in order to get cm accuracy GPS positions. Using RTKNAVI with a NV08C-CSM rover and NTRIP base station corrections, i´m getting an accuracy of about 30 cm. But for the purpose I am developing the system, i need to achieve an accuracy of less than 10 cm.</div><div><br></div><div>I hope you can help me with this two main question i have:</div><div><ul><li>First off all, can anyone share with me rktnavi settings that give an accuracy <10cm? In RTKNAVI options, I mainly interested in Settings1, Setting2 and Statistics.<br></li><li>Secondly, when i plot the rover position with RTKPLOT after the system is stabilized in a FIX solution, i can see the position of the rover in a fixed point of accuracy more or less 30 cm. The problems comes when i stop and start RTKNAVI and i plot again the position. After it stabilizes i get a fix new position (quite far from the previous), with the rover in the same position. Can anyone tell what is the reasion of this change?<br></li></ul><p>Thanks for your help, best regards.<br></p></div></div>