<div dir="ltr"><div dir="ltr"><div>Dear colleagues,</div><div><br></div><div>I would like to use a Raspberry Pi to log raw GNSS data and to send NTRIP correction to a u-blox receiver same time.</div><div>I'm using two str2str processes for this task. First provides the RTCM3 correction to the receiver, second logs the data stream from the receiver to a ubx file. The baudrate is 460800, the navigation rate is 10 Hz, RXM-RAWX and NAV-PVT messages are enabled only.</div><div>When I check the log file in u-center there are a lot of broken, unknown messages.</div><div><br></div><div>I found at <a href="https://rtklibexplorer.wordpress.com/2018/08/14/comparison-of-the-u-blox-m8t-to-the-u-blox-m8p/">rtklibexplorer</a> there is Output Received Stream to TCP Port option for the strsvr application. How is it feasible on the Pi with str2str?<br><br>Thank you!<br><br>Best regards,</div><div>Marton</div><div><br></div><div><br></div><div><br></div></div></div>