<div dir="ltr">Hi,<div><br><div>I'm working with some aviation charts and found one that behaves in a puzzling manner.</div><div>This page <a href="https://www.faa.gov/air_traffic/flight_info/aeronav/digital_products/vfr/">https://www.faa.gov/air_traffic/flight_info/aeronav/digital_products/vfr/</a> <br></div><div>has two Caribbean VFR charts in GeoTIFF format.</div><div><br></div><div>I have been trying to run gdalwarp on "Caribbean 2 VFR Chart.tif" but I only ever get a small area out of the map instead of the whole extent.  Specifically this command gives me just a smaller area output GeoTIFF:</div><div><br></div><div>gdalwarp -t_srs EPSG:4326 "Caribbean 2 VFR Chart.tif" out.tif --debug ON<br></div><div><br></div><div>I don't see anything from the debug output that explains this.</div><div><br></div><div>The other chart, "Caribbean 1 VFR Chart.tif," does not behave this way, though the debug output from the same gdalwarp operation is much longer.</div><div><br></div><div>I can't see anything wrong.  </div><div><br></div><div>I dragged both files into ArcGIS desktop explorer and both are displayed in the proper location and in their entirety.  </div><div><br></div><div>(I actually have a more elaborate workflow that works fine with chart #1 but this is the simplest operation I can think of that shows the problem with chart #2.)</div><div><br></div><div>Thank you very much,</div><div>carl</div><div><br></div><div><br></div></div></div>