<div dir="ltr">When using r.profile interactively in a location using horizontal and vertical units of meters, the output profile is correct.  My transect is about 800 meters long.<div><br>When using r.profile interactively in a location using horizontal and vertical units of feet, the Y axis (raster elevation values) displays values correctly.  However, the X axis stops plotting at 800 *feet* but puts the endpoint 'triangle' of the profile at the correct distance on the X axis at around 2600 feet.   Essentially, it squishes the plot to fit between 0 and 800 when it should be between 0 and around 2600. </div>

<div><br></div><div>I notice that when I measure distances, the display also outputs the units in meters, but the values are in feet.  Seems like a related issue.   </div><div><br></div><div>Where do I change this so that units are correct as feet?  I've tried setting the EPSG code in Settings-->Preferences-->Projection Tab to 2882 with the proj.4 string inserted, but it still treats the horizontal units as if they were meters and not feet when measuring or profiling the surface.</div>

<div><br></div><div>Tried r.profile in GRASS 6.4 and 7.1 on Linux Mint with same results.</div><div><br></div><div>Thanks,<br>Mark</div></div>