<div dir="ltr"><div><div>Rich,<br><br></div>You understand, don't you, that the point you are using to define your 'dam', delineates a watershed; so, there is runoff from the watershed, which will not be uniform in its contribution -- a fundamental issue in hydrology, which is more critical to quantify accurately at smaller spatial scales -- knowing the rainfall rate alone will not give you what you need. You also need to generate a storage-elevation curve, which will relate the water level (which r.lake needs) to the volume behind your dam (assuming none escapes, otherwise the problem gets more complicated) -- the change in volume depends on the inflow rate, which a hydrologic model will provide. Typically, hydrologic models are calibrated against observed flow data. There is the further assumption that the inflow spreads over the lake surface instantaneously, which for a small surface area is not altogether unreasonable...<br><br></div>Tom<br><div class="gmail_extra"><br><div class="gmail_quote">On Wed, Oct 5, 2016 at 11:48 AM, Rich Shepard <span dir="ltr"><<a href="mailto:rshepard@appl-ecosys.com" target="_blank">rshepard@appl-ecosys.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">  I want to ensure my understanding how to use r.lake for my need.<br>
<br>
  It would be good to produce animation of flooded area with increasing<br>
precipitation; use of the '-o' option is required. But, perhaps I need to<br>
produce a large series of individual maps.<br>
<br>
  Under what condition is use of the '-n' option appropriate?<br>
<br>
  If I want a final water_level of 1 m above the elevation of the specified<br>
coordinates in increments of 0.254 mm how can I specify this for the<br>
animation? The manual's description tells me that the 1 m water_level is the<br>
final height and the elevation of the specified coordinates is the starting<br>
height. How are map-to-map increments specified? A related question is<br>
whether the water level associated with a given map can be produced. That<br>
is, can individual maps in the animation be related to specific water<br>
levels? This quantification of output map and water level above the starting<br>
elevation is very important.<br>
<br>
  All thoughts, suggestions, and pointers to more information are welcome.<br>
<br>
Rich<br>
______________________________<wbr>_________________<br>
grass-user mailing list<br>
<a href="mailto:grass-user@lists.osgeo.org" target="_blank">grass-user@lists.osgeo.org</a><br>
<a href="http://lists.osgeo.org/mailman/listinfo/grass-user" rel="noreferrer" target="_blank">http://lists.osgeo.org/mailman<wbr>/listinfo/grass-user</a></blockquote></div><br><br><div dir="ltr"><div><div dir="ltr"><div><div><br></div></div></div></div></div>
</div></div>