<div dir="ltr">Hi Nikos,<div><br></div><div>Commands are as follows</div><div><br></div><div><b>r.ros,</b><div>r.ros --overwrite model=fuel_model@demomapset moisture_1h=1hour_moisture@demomapset moisture_live=live_moisture@demomapset velocity=wind_speed@demomapset direction=wind_direction@demomapset slope=slope@demomapset aspect=aspect@demomapset elevation=elevation@demomapset base_ros=my_ros.base max_ros=my_ros.max direction_ros=my_ros.maxdir spotting_distance=my_ros.spotdist<br></div><div><br></div><div><b>r.spread,</b></div><div>r.spread --overwrite base_ros=my_ros.base@demomapset max_ros=my_ros.max@demomapset direction_ros=my_ros.maxdir@demomapset start=fire_origin@demomapset wind_speed=wind_speed@demomapset output=spread_time_observed<br></div><div><br></div><div><b>After entering; r.category spread_time_observed,</b></div><div><div><img src="cid:ii_jnahv67w0" alt="1.png" width="455" height="113" class="gmail-CToWUd"><br></div></div><div><br></div><div><b>After entering; r.report spread_time_observed units=c,p,</b><br></div><div><div><img src="cid:ii_jnahwz6a1" alt="Screenshot from 2018-10-15 21-40-46.png" width="476" height="136" class="gmail-CToWUd gmail-a6T" tabindex="0" style="cursor: pointer; outline: 0px;"></div></div></div><div><br></div><div><br></div><div>Thank You</div><div>Best Regards</div><div>Kalindu Perera</div></div><br><div class="gmail_quote"><div dir="ltr">On Mon, 15 Oct 2018 at 20:30, Nikos Alexandris <<a href="mailto:nik@nikosalexandris.net">nik@nikosalexandris.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Please post the exact command you have used (copy-and-paste).<br>
<br>
Then, what does<br>
```<br>
r.category spread_time_observed<br>
```<br>
<br>
and what does<br>
```<br>
r.report spread_time_observed units=c,p<br>
```<br>
<br>
return?<br>
<br>
* Kalindu Perera <<a href="mailto:kkc199408@gmail.com" target="_blank">kkc199408@gmail.com</a>> [2018-10-15 16:01:38 +0530]:<br>
<br>
>Dear Nikos,<br>
><br>
>We have used r.ros and r.spread commands for getting the wildfire<br>
>simulation.<br>
>After that, the output from the r.spread command is spread_time_observed<br>
>layer(This is the output from the simulation)<br>
>We use that layer as the input layer for the r.surf.area command.<br>
><br>
>We got many area outputs from that command output and couldn't identify<br>
>what area gives the area of the "burned" area<br>
>* I have attached the output from running r.surf.area command as an<br>
>attachment.<br>
><br>
>** Another question how we can extract only the "burned" area from the<br>
>spread_time_observed layer?<br>
><br>
>Thanks a lot for the quick reply<br>
>Looking forward to more knowledge<br>
><br>
>Best Regards<br>
>Kalindu Perera<br>
><br>
><br>
>On Mon, 15 Oct 2018 at 15:07, Nikos Alexandris <<a href="mailto:nik@nikosalexandris.net" target="_blank">nik@nikosalexandris.net</a>><br>
>wrote:<br>
><br>
>> * Kalindu Perera <<a href="mailto:kkc199408@gmail.com" target="_blank">kkc199408@gmail.com</a>> [2018-10-15 13:28:15 +0530]:<br>
>><br>
>> >Dear all,<br>
>> ><br>
>> >We are doing wildfire simulation in Grass GIS. We need to compare the area<br>
>> >of 2 wildfire spreads after wildfire simulation ran. We tried to calculate<br>
>> >the area of the spread using r.surf.area module. But we couldn't identify<br>
>> >which is the area of the simulation from areas given from that. Could<br>
>> >anyone tell us how to get an area from spread like this?<br>
>><br>
>> Dear Kalindu,<br>
>><br>
>> please post exact commands you already tried.<br>
>><br>
>> What are the simulation output maps?<br>
>> Fitst, what does `r.category` and `r.report` return when used for<br>
>> simulation<br>
>> maps?<br>
>><br>
>> Then, maybe you need to "extract", each time, the "burned" area, then<br>
>> use `r.surf.area` on it?<br>
>><br>
>> Nikos<br>
>><br>
>><br>
>><br>
<br>
<br>
<br>
-- <br>
Nikos Alexandris | Remote Sensing & Geomatics<br>
GPG Key Fingerprint 6F9D4506F3CA28380974D31A9053534B693C4FB3 <br>
</blockquote></div>