<div dir="ltr">Hi,<div><br></div><div>I've been working with some aerial imagery that I shot over the past few months. Basically doing a comparison of ODM output with my Photoscan results. Unfortunately with the latest codebase I've been getting some pretty strange results when generating an orthophoto. You can see what I'm talking about here:</div><div><br></div><div><a href="https://www.dropbox.com/sh/extsb6o6jaoq8t2/AADRvkeINPydFVwKDaheZtzSa?dl=0">https://www.dropbox.com/sh/extsb6o6jaoq8t2/AADRvkeINPydFVwKDaheZtzSa?dl=0</a><br></div><div><br></div><div>You can see the intended results from Photoscan (after running through gdal2tiles) here:</div><div><br></div><div><a href="http://www.unmannedairlines.com/dev/tiger_stadium">http://www.unmannedairlines.com/dev/tiger_stadium</a><br></div><div><br></div><div>My question is what is the best way to go about troubleshooting these results? I have all of the log output, but am not sure of the best place to start. This imagery was generated with a Phantom 4 so I did have to do some manipulation of focallength and ccd width just to get ODM to run. Perhaps I botched something there.</div><div><br></div><div>Any insight of where to start would be much appreciated.</div><div><br></div><div>Thanks,<br>Dennis</div></div>