[Qgis-user] Qgis-user Digest, Vol 164, Issue 49
Leung, Scott (MRC)
scott.leung2 at state.ma.us
Thu Oct 31 11:35:30 PDT 2019
Hi Ken,
My issue is actually geocoding, but if that has ties with raster resampling can you explain the connection?
Thanks,
Scott
From: Qgis-user [mailto:qgis-user-bounces at lists.osgeo.org] On Behalf Of Ken McCall
Sent: Thursday, October 31, 2019 12:26 PM
To: qgis-user at lists.osgeo.org
Subject: Re: [Qgis-user] Qgis-user Digest, Vol 164, Issue 49
Bug ticket opened on the Training Manual issies as requested.
Ken
On Thu, Oct 31, 2019 at 9:24 AM <qgis-user-request at lists.osgeo.org<mailto:qgis-user-request at lists.osgeo.org>> wrote:
Send Qgis-user mailing list submissions to
qgis-user at lists.osgeo.org<mailto:qgis-user at lists.osgeo.org>
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.osgeo.org/mailman/listinfo/qgis-user<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.osgeo.org_mailman_listinfo_qgis-2Duser&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=2RWC-O7PKThezkmswru4Vq0igPwv7cg4gZ-X3L50OOs&e=>
or, via email, send a message with subject or body 'help' to
qgis-user-request at lists.osgeo.org<mailto:qgis-user-request at lists.osgeo.org>
You can reach the person managing the list at
qgis-user-owner at lists.osgeo.org<mailto:qgis-user-owner at lists.osgeo.org>
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Qgis-user digest..."
Today's Topics:
1. Re: Problems using QGIS 3.8 with the 3.4 Training Manual
(Alexandre Neto)
2. GeoTiff Viewer (Mike Flannigan)
3. Re: Problems using QGIS 3.8 with the 3.4 Training Manual
(Matthias Kuhn)
4. problem with the approximation of data (Anita Sblano)
5. Inflection point of a terrain (Patrick Marx)
6. Raster resampling (Dietrich Heintz)
7. Re: Raster resampling (Leung, Scott (MRC))
----------------------------------------------------------------------
Message: 1
Date: Wed, 30 Oct 2019 21:41:07 +0000
From: Alexandre Neto <senhor.neto at gmail.com<mailto:senhor.neto at gmail.com>>
To: SIGéal <sigeal at sigeal.com<mailto:sigeal at sigeal.com>>
Cc: QGIS User <qgis-user at lists.osgeo.org<mailto:qgis-user at lists.osgeo.org>>
Subject: Re: [Qgis-user] Problems using QGIS 3.8 with the 3.4 Training
Manual
Message-ID:
<CA+H0G_EYaJrh1hCpQ1kdzH=3htp-Y+6XDdc8ufHWuBfcAVXhvg at mail.gmail.com<mailto:3htp-Y%2B6XDdc8ufHWuBfcAVXhvg at mail.gmail.com>>
Content-Type: text/plain; charset="utf-8"
Hi Ken,
It can be any of the three problems, but, since you are following orders,
let's assume that it's not your error.
I would start guessing that the documentation may be outdated. And it may
not be a question of 3.4 vs 3.8, but really outdated information even for
3.4.
This being said, can I ask you to open qgis-documentation bug tickets,
whenever you find problems in the documentation?
Thanks,
Alexandre Neto
A quarta, 30/10/2019, 19:18, SIGéal <sigeal at sigeal.com<mailto:sigeal at sigeal.com>> escreveu:
> Hi,
>
> I remember having this problem if I typed the shapefile name directly in
> the textbox, without clicking on the Browse button to select a location for
> the file.
>
> Hope this helps,
>
> --
> Christophe
>
> Le 30/10/2019 à 19:29, Jorge Gustavo Rocha a écrit :
>
> Hi Ken,
>
> Where are you storing the new layer? Maybe you are not selecting a folder
> where you can write the new shapefile (that's why you get the permission
> denied error). Can you confirm the location of the new shapefile?
>
> Regards,
>
> Jorge Gustavo
> Às 16:15 de 30/10/19, Ken McCall escreveu:
>
> After years of using ARCGIS, I’m using the training manual to become
> acquainted with QGIS. I’ve downloaded 3.8, and worked through the first 100
> pages with no problem. While some of the 3.8 dialog boxes don’t look
> like the training manual I’ve been able to see the required buttons, drop
> downs, etc. But on others, I’ve hit some deadends.
>
>
>
> For example, on page 105 when it try to create a dynamic map canvas, in
> 5.2.1.5, when I go to the Item *Properties Panel*, there is no *Position
> and Size* section showing.
>
>
>
> Another example: On p. 114 in ‘Creating a New Vector Dataset’, when I try
> to save the dataset, I get an error message:
>
>
>
> ‘Layer creation failed: Failed to create file created_shapefile.shp:
> Permission denied.
>
>
>
> In both examples, I’ve tried several times, following the instructions,
> only to get the same result.
>
>
>
> So, questions:
>
>
>
> Is 3.8 that different from 3.4?
>
> Am I running into bugs in the software or the documentation? (It could be
> user error, but I’m painstakingly following the instructions.)
>
> Should I scrap 3.8 and go with 3.4 instead?
>
>
>
> TIA,
>
>
>
> Ken McCall
>
> _______________________________________________
> Qgis-user mailing listQgis-user at lists.osgeo.org<mailto:listQgis-user at lists.osgeo.org>
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.osgeo.org_mailman_listinfo_qgis-2Duser&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=2RWC-O7PKThezkmswru4Vq0igPwv7cg4gZ-X3L50OOs&e=>
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.osgeo.org_mailman_listinfo_qgis-2Duser&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=2RWC-O7PKThezkmswru4Vq0igPwv7cg4gZ-X3L50OOs&e=>
>
> --
> [image: Logo] <https://www.geomaster.pt<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.geomaster.pt&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=CRcM5MV_KB9SWIsEOlisbvjMd8SDng6cGwdSaViiUus&e=>>
> *Geomaster*
> *Jorge Gustavo Rocha* | Software Engineer
> *e:* jgr at geomaster.pt<mailto:jgr at geomaster.pt> | *m:* +351 910 333 888
> *g:* 41.54094,-8.40490 | *v: * 510 906 109
> *a: * Rua António Cândido Pinto, 67, 4715-400 Braga
>
> _______________________________________________
> Qgis-user mailing listQgis-user at lists.osgeo.org<mailto:listQgis-user at lists.osgeo.org>
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.osgeo.org_mailman_listinfo_qgis-2Duser&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=2RWC-O7PKThezkmswru4Vq0igPwv7cg4gZ-X3L50OOs&e=>
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.osgeo.org_mailman_listinfo_qgis-2Duser&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=2RWC-O7PKThezkmswru4Vq0igPwv7cg4gZ-X3L50OOs&e=>
>
>
> _______________________________________________
> Qgis-user mailing list
> Qgis-user at lists.osgeo.org<mailto:Qgis-user at lists.osgeo.org>
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.osgeo.org_mailman_listinfo_qgis-2Duser&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=2RWC-O7PKThezkmswru4Vq0igPwv7cg4gZ-X3L50OOs&e=>
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.osgeo.org_mailman_listinfo_qgis-2Duser&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=2RWC-O7PKThezkmswru4Vq0igPwv7cg4gZ-X3L50OOs&e=>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osgeo.org/pipermail/qgis-user/attachments/20191030/5c20b973/attachment-0001.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.osgeo.org_pipermail_qgis-2Duser_attachments_20191030_5c20b973_attachment-2D0001.html&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=GTOP8q5_ZjEnyhzB6Gutw8IZ-ACM3jbqDmOom6WinTg&e=>>
------------------------------
Message: 2
Date: Wed, 30 Oct 2019 19:32:01 -0500
From: Mike Flannigan <mikeflan at att.net<mailto:mikeflan at att.net>>
To: Qgis Users List - International <qgis-user at lists.osgeo.org<mailto:qgis-user at lists.osgeo.org>>
Subject: [Qgis-user] GeoTiff Viewer
Message-ID: <f52c466a-3a38-8028-7807-dcf6d32b4cca at att.net<mailto:f52c466a-3a38-8028-7807-dcf6d32b4cca at att.net>>
Content-Type: text/plain; charset=utf-8; format=flowed
I have been using Global Mapper on Windows
for 15+ years. I am now on Linux Mint.
I want a simple viewer that can open multiple
Geo Tiff files (just 1 to 4 7.5' topos), copy
cursor coordinates to the clipboard, zoom to
coordinates passed to the program, and perhaps
measure linear distance. Something simple and
fast. For more complicated things I usually
use QGIS or GoogleMaps, or sometimes even Google
Earth.
I'm going to try OpenEV real soon. The last
time I used it on Windows (10+ years ago) I did
not like it much, but it did work.
I welcome suggestions you may have.
Mike
------------------------------
Message: 3
Date: Thu, 31 Oct 2019 09:15:25 +0100
From: Matthias Kuhn <matthias at opengis.ch<mailto:matthias at opengis.ch>>
To: qgis-user at lists.osgeo.org<mailto:qgis-user at lists.osgeo.org>
Subject: Re: [Qgis-user] Problems using QGIS 3.8 with the 3.4 Training
Manual
Message-ID: <1b09b7d1-734e-0ae1-b614-3081898be60b at opengis.ch<mailto:1b09b7d1-734e-0ae1-b614-3081898be60b at opengis.ch>>
Content-Type: text/plain; charset="utf-8"; Format="flowed"
Hi Alexandre, Ken,
I would like to second this opinion and first thank you very much for
bringing this subject up.
If you are fine with it, please follow Alexandre Neto's approach and add
new issues (one per issue you encounter) here:
https://github.com/qgis/QGIS-Documentation/issues<https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_qgis_QGIS-2DDocumentation_issues&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=xotfy3UsTX-oOivkeIuQDlmvfOKCA-0_RRpWf4Hz2go&e=>
There we can help you (figure out what's wrong) and update the
documentation for everyone else too.
Thanks again
Matthias
On 10/30/19 10:41 PM, Alexandre Neto wrote:
> Hi Ken,
>
> It can be any of the three problems, but, since you are following
> orders, let's assume that it's not your error.
>
> I would start guessing that the documentation may be outdated. And it
> may not be a question of 3.4 vs 3.8, but really outdated information
> even for 3.4.
>
> This being said, can I ask you to open qgis-documentation bug tickets,
> whenever you find problems in the documentation?
>
> Thanks,
>
> Alexandre Neto
>
> A quarta, 30/10/2019, 19:18, SIGéal <sigeal at sigeal.com<mailto:sigeal at sigeal.com>
> <mailto:sigeal at sigeal.com<mailto:sigeal at sigeal.com>>> escreveu:
>
> Hi,
>
> I remember having this problem if I typed the shapefile name
> directly in the textbox, without clicking on the Browse button to
> select a location for the file.
>
> Hope this helps,
>
> --
> Christophe
>
> Le 30/10/2019 à 19:29, Jorge Gustavo Rocha a écrit :
>>
>> Hi Ken,
>>
>> Where are you storing the new layer? Maybe you are not selecting
>> a folder where you can write the new shapefile (that's why you
>> get the permission denied error). Can you confirm the location of
>> the new shapefile?
>>
>> Regards,
>>
>> Jorge Gustavo
>>
>> Às 16:15 de 30/10/19, Ken McCall escreveu:
>>>
>>> After years of using ARCGIS, I’m using the training manual to
>>> become acquainted with QGIS. I’ve downloaded 3.8, and worked
>>> through the first 100 pages with no problem. While some of the
>>> 3.8 dialog boxes don’t look like the training manual I’ve been
>>> able to see the required buttons, drop downs, etc. But on
>>> others, I’ve hit some deadends.
>>>
>>> For example, on page 105 when it try to create a dynamic map
>>> canvas, in 5.2.1.5, when I go to the Item /Properties Panel/,
>>> there is no /Position and Size/ section showing.
>>>
>>> Another example: On p. 114 in ‘Creating a New Vector Dataset’,
>>> when I try to save the dataset, I get an error message:
>>>
>>> ‘Layer creation failed: Failed to create file
>>> created_shapefile.shp: Permission denied.
>>>
>>> In both examples, I’ve tried several times, following the
>>> instructions, only to get the same result.
>>>
>>> So, questions:
>>>
>>> Is 3.8 that different from 3.4?
>>>
>>> Am I running into bugs in the software or the documentation? (It
>>> could be user error, but I’m painstakingly following the
>>> instructions.)
>>>
>>> Should I scrap 3.8 and go with 3.4 instead?
>>>
>>> TIA,
>>>
>>> Ken McCall
>>>
>>>
>>> _______________________________________________
>>> Qgis-user mailing list
>>> Qgis-user at lists.osgeo.org<mailto:Qgis-user at lists.osgeo.org> <mailto:Qgis-user at lists.osgeo.org<mailto:Qgis-user at lists.osgeo.org>>
>>> List info:https://lists.osgeo.org/mailman/listinfo/qgis-user<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.osgeo.org_mailman_listinfo_qgis-2Duser&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=2RWC-O7PKThezkmswru4Vq0igPwv7cg4gZ-X3L50OOs&e=>
>>> Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.osgeo.org_mailman_listinfo_qgis-2Duser&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=2RWC-O7PKThezkmswru4Vq0igPwv7cg4gZ-X3L50OOs&e=>
>> --
>> Logo <https://www.geomaster.pt<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.geomaster.pt&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=CRcM5MV_KB9SWIsEOlisbvjMd8SDng6cGwdSaViiUus&e=>>
>> *Geomaster*
>> *Jorge Gustavo Rocha* | Software Engineer
>> *e:*jgr at geomaster.pt<mailto:jgr at geomaster.pt> <mailto:jgr at geomaster.pt<mailto:jgr at geomaster.pt>> | *m:*+351 910 333 888
>> *g:*41.54094,-8.40490 | *v: *510 906 109
>> *a: * Rua António Cândido Pinto, 67, 4715-400 Braga
>>
>>
>> _______________________________________________
>> Qgis-user mailing list
>> Qgis-user at lists.osgeo.org<mailto:Qgis-user at lists.osgeo.org> <mailto:Qgis-user at lists.osgeo.org<mailto:Qgis-user at lists.osgeo.org>>
>> List info:https://lists.osgeo.org/mailman/listinfo/qgis-user<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.osgeo.org_mailman_listinfo_qgis-2Duser&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=2RWC-O7PKThezkmswru4Vq0igPwv7cg4gZ-X3L50OOs&e=>
>> Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.osgeo.org_mailman_listinfo_qgis-2Duser&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=2RWC-O7PKThezkmswru4Vq0igPwv7cg4gZ-X3L50OOs&e=>
>
> _______________________________________________
> Qgis-user mailing list
> Qgis-user at lists.osgeo.org<mailto:Qgis-user at lists.osgeo.org> <mailto:Qgis-user at lists.osgeo.org<mailto:Qgis-user at lists.osgeo.org>>
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.osgeo.org_mailman_listinfo_qgis-2Duser&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=2RWC-O7PKThezkmswru4Vq0igPwv7cg4gZ-X3L50OOs&e=>
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.osgeo.org_mailman_listinfo_qgis-2Duser&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=2RWC-O7PKThezkmswru4Vq0igPwv7cg4gZ-X3L50OOs&e=>
>
>
> _______________________________________________
> Qgis-user mailing list
> Qgis-user at lists.osgeo.org<mailto:Qgis-user at lists.osgeo.org>
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.osgeo.org_mailman_listinfo_qgis-2Duser&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=2RWC-O7PKThezkmswru4Vq0igPwv7cg4gZ-X3L50OOs&e=>
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.osgeo.org_mailman_listinfo_qgis-2Duser&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=2RWC-O7PKThezkmswru4Vq0igPwv7cg4gZ-X3L50OOs&e=>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osgeo.org/pipermail/qgis-user/attachments/20191031/20211e32/attachment-0001.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.osgeo.org_pipermail_qgis-2Duser_attachments_20191031_20211e32_attachment-2D0001.html&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=054rzLMat82YySx18Z2WymsMn3BC0l1Ptfh0ioFThPQ&e=>>
------------------------------
Message: 4
Date: Thu, 31 Oct 2019 09:34:20 +0100
From: Anita Sblano <sbla24.ta at gmail.com<mailto:sbla24.ta at gmail.com>>
To: qgis-user at lists.osgeo.org<mailto:qgis-user at lists.osgeo.org>
Subject: [Qgis-user] problem with the approximation of data
Message-ID:
<CA+38oeOpkS1Lwpa0nU6XDUuf9yMiGFKJL7MqSDSYq7uD7TDT6A at mail.gmail.com<mailto:CA%2B38oeOpkS1Lwpa0nU6XDUuf9yMiGFKJL7MqSDSYq7uD7TDT6A at mail.gmail.com>>
Content-Type: text/plain; charset="utf-8"
Googmornig,
I have a problem in the section graduate( symbology--->graduate).
I want to scaling data from 0 to 0.9 in ten step, but when i put in the
cases a range from 0.0 to 0.1 (or 0.1 to 0.2 etc) the system transforms
the range from 0 to 1.000000 (or 1.000000 to 2.000000).
I have rinstalled the program and now i have the 3.10 , but I have the
same problem . I have also tested my shape file in an another computer and
the approximation works.
How it is possible?? What could be the problem?
Thanks a lot for your help.
--
A.S.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osgeo.org/pipermail/qgis-user/attachments/20191031/07d7dba1/attachment-0001.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.osgeo.org_pipermail_qgis-2Duser_attachments_20191031_07d7dba1_attachment-2D0001.html&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=BDuLNkdXNnsuZRsWvJVuvmhD-rGK0b0Hne3-y53dKVI&e=>>
------------------------------
Message: 5
Date: Thu, 31 Oct 2019 08:52:21 +0000 (UTC)
From: Patrick Marx <patrick.marx at gmx.de<mailto:patrick.marx at gmx.de>>
To: QGIS Users <qgis-user at lists.osgeo.org<mailto:qgis-user at lists.osgeo.org>>
Subject: [Qgis-user] Inflection point of a terrain
Message-ID:
<13D80AB8399BFAAE.4c1e6599-0f8a-4b1d-94a3-666c41c1a608 at mail.outlook.com<mailto:13D80AB8399BFAAE.4c1e6599-0f8a-4b1d-94a3-666c41c1a608 at mail.outlook.com>>
Content-Type: text/plain; charset="utf-8"
Hi all, I would like to find the contour line in a dem at the inflection point of the slope. I mean, I would like to know at which height the terrain is changing from convex to concave. I found plugins which calculate if a specific cell is convex or concave in relation to its neighbours in a 3 x 3 raster. But I would like to know it for a specific terrain.Does anyone has an idea?Regards Patrick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osgeo.org/pipermail/qgis-user/attachments/20191031/5d320529/attachment-0001.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.osgeo.org_pipermail_qgis-2Duser_attachments_20191031_5d320529_attachment-2D0001.html&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=n6fsCHbr9qWScQESYf9y-cDH38vZnMmBSvhWdxV66e4&e=>>
------------------------------
Message: 6
Date: Thu, 31 Oct 2019 12:33:18 +0100
From: Dietrich Heintz <dheintz at gmx.net<mailto:dheintz at gmx.net>>
To: QGIS Users <qgis-user at lists.osgeo.org<mailto:qgis-user at lists.osgeo.org>>
Subject: [Qgis-user] Raster resampling
Message-ID: <7cb89217-00ec-0f22-e2e6-018e82dc075e at gmx.net<mailto:7cb89217-00ec-0f22-e2e6-018e82dc075e at gmx.net>>
Content-Type: text/plain; charset="utf-8"; Format="flowed"
Dear all,
I would like to use OSGeo Shell for the resampling of a list of rasterfiles.
The files are in tiff-format and I want to use a resampling method with
a gauss filter.
I would like to have a batch file with multiple lines where the first
one looks somehow like this:
gdalwarp r-cubic of GTiff input.file output.file
This would work, but I would like to enhance the cubic filtering with an
information to steer the
radius of filtering like GRA_Gauss = 7.
Kind regards
Dieter
--
_________________
Kronenbergstr. 7
CH-8800 Thalwil
+41 76 749 22 77
+41 43 540 90 71
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osgeo.org/pipermail/qgis-user/attachments/20191031/3a2f310a/attachment-0001.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.osgeo.org_pipermail_qgis-2Duser_attachments_20191031_3a2f310a_attachment-2D0001.html&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=MjWRf0AK2YLmyMM88mgbT5_7L0w7Wxu46yZRNHdLN8U&e=>>
------------------------------
Message: 7
Date: Thu, 31 Oct 2019 13:23:28 +0000
From: "Leung, Scott (MRC)" <scott.leung2 at state.ma.us<mailto:scott.leung2 at state.ma.us>>
To: "qgis-user at lists.osgeo.org<mailto:qgis-user at lists.osgeo.org>" <qgis-user at lists.osgeo.org<mailto:qgis-user at lists.osgeo.org>>
Subject: Re: [Qgis-user] Raster resampling
Message-ID:
<4a7dc1e051b04f6eaa3f26c09b8564a6 at ES-CHL-EMR-07.es.govt.state.ma.us<mailto:4a7dc1e051b04f6eaa3f26c09b8564a6 at ES-CHL-EMR-07.es.govt.state.ma.us>>
Content-Type: text/plain; charset="utf-8"
Hi everyone,
I just installed QGIS 3.10 on my work machine yesterday, and am wondering where the geocoding tool is? Can someone tell me where it is?
Thanks,
Scott
From: Qgis-user [mailto:qgis-user-bounces at lists.osgeo.org<mailto:qgis-user-bounces at lists.osgeo.org>] On Behalf Of Dietrich Heintz
Sent: Thursday, October 31, 2019 7:33 AM
To: QGIS Users <qgis-user at lists.osgeo.org<mailto:qgis-user at lists.osgeo.org>>
Subject: [Qgis-user] Raster resampling
Dear all,
I would like to use OSGeo Shell for the resampling of a list of rasterfiles.
The files are in tiff-format and I want to use a resampling method with a gauss filter.
I would like to have a batch file with multiple lines where the first one looks somehow like this:
gdalwarp r-cubic of GTiff input.file output.file
This would work, but I would like to enhance the cubic filtering with an information to steer the
radius of filtering like GRA_Gauss = 7.
Kind regards
Dieter
--
_________________
Kronenbergstr. 7
CH-8800 Thalwil
+41 76 749 22 77
+41 43 540 90 71
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osgeo.org/pipermail/qgis-user/attachments/20191031/4fbc5e3f/attachment.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.osgeo.org_pipermail_qgis-2Duser_attachments_20191031_4fbc5e3f_attachment.html&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=jCZGqSC1nPUIleP7gY_-FH_oT5MvOQn56JmiEhuYLLk&e=>>
------------------------------
Subject: Digest Footer
_______________________________________________
Qgis-user mailing list
Qgis-user at lists.osgeo.org<mailto:Qgis-user at lists.osgeo.org>
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.osgeo.org_mailman_listinfo_qgis-2Duser&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=2RWC-O7PKThezkmswru4Vq0igPwv7cg4gZ-X3L50OOs&e=>
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.osgeo.org_mailman_listinfo_qgis-2Duser&d=DwMFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=TmYSpBfwrgrRQcQDq3L36UrSGksWDtiBtFQLcjbiSN0&m=sgdWeoKsCHjfrt2qgKgmNCe9QsT4KatbF-FQ5pJcfq0&s=2RWC-O7PKThezkmswru4Vq0igPwv7cg4gZ-X3L50OOs&e=>
------------------------------
End of Qgis-user Digest, Vol 164, Issue 49
******************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osgeo.org/pipermail/qgis-user/attachments/20191031/c2d29727/attachment-0001.html>
More information about the Qgis-user
mailing list