<div dir="ltr">I  have a georeferenced soil Map. I did the georeferencing in Qgis using EPSG 26714 as the CRS. I have the following issue. When I load the image in 2.14 the project is set to EPSG 4326. When I load it in 2.8X the project is set to 26714. I have tested this behavior in two different machines using win 10 64 bits. In both machines I have the same behavior in the same Qgis versions. CRS Options for both qgis versions are the same:<div><br><div>Default CRS for new projects: Automatically enable on the fly reprojection if layers have different CRS</div><div>CRS for new layers: Use layer CRS</div><div><br></div><div>I have tested also changing from use layer CRS to prompt for CRS. When I do this, On the fly transformation is activated as if by dafault project must be in 4326.</div><div><br></div><div><div>The only work around in 2.14 is to select the layer right click and choose set CRS from layer. This makes the project to be set at 26714. <br clear="all"><div><br></div><div>I was use to load my image and that the project was automatically set to the image CRS. Any one have the same problem? Any one can tell me what potentially I am doing wrong?</div><div><br></div><div>Thanks in advance</div><div><br></div><div>Gerardo</div><div><br></div><div><br></div>-- <br><div class="gmail_signature"><div dir="ltr">Gerardo Jiménez Delgado<div>Instituto de Investigaciones Antropológicas</div><div>Universidad Nacional Autónoma de México</div><div>Ciudad Universitaria s/n, Coyoacan 04510</div><div>México City,México</div><div>tel. 56 22 95 16</div><div>fax. 56 22 96 51</div><div><br></div></div></div>
</div></div></div></div>