<div dir="ltr">Hello all.<div><br></div><div>I am attempting to edit (change) the values for all pixels in a DEM in region of the DEM. </div><div><br></div><div><div>The real-world problem is I want to burn in a proposed flood wall/dike into an existing DEM.</div></div><div><br></div><div>I have a polygon with the desired elevation field, and I also have a raster with the desired elevation values (rasterized from the polygon).</div><div><br></div><div>I have looked at rasterize tool, however cannot find the correct way burn the overlying polygon into the dem (referencing an attribute field), or if it is even possible. </div><div><br></div><div>I would also think raster calculator would do it with the two rasters, but I do not have the syntax down: </div><div><br></div><div>pseudo-code: if dike-dem is_not "no_data" |> use dike-dem; else use original-DEM. </div><div><br></div><div>Here is a screen shot of the two rasters.</div><div><br></div><div>All help is appreciated; thanks in advance.</div><div><br></div><div>Doug Johnston</div></div>