<div dir="ltr">Working with a project in EPSG 3857 (Pseudo Mercator, Google Maps or USGS Topo) when using the measuring tool for distance the Cartographic distance and Ellipsoidal distance differ greatly. I assume that cartographic distance is a simple calculation using plane coordinates which have been projected such that they yield correct distance if the projection preserves this quality, but I have not found a concise definition. The ellipsoidal distance is, of course, following the path on the surface of the project ellipsoid. I have the project geoid set to WGS84. I would think that there should be no significant difference in these two distances for a distance as close as 100 feet, for example.<div><br></div><div>As an example, for the distance between 2 survey pins of 84 feet, the Ellipsoidal distance is correct but the Cartographic distance is 102 feet. I am confused as to why the computation type exists, though there may be nothing in the definition of a projection which indicates it is equidistant. If the projection is equidistant then the result should be close to the same. If not, it is invalid, although for such a short distance, I would not expect to see much difference. I am observing this in 3.12, but I think I have noticed this over many versions.</div><div><br></div><div>Any insight into what is going on here would be appreciated.</div><div><br></div><div>Thanks,</div><div><br></div><div>Stewart</div></div>