<div dir="ltr">Yes, as far as I know, the NAS unit uses SMB as the file sharing protocol. I used another NAS from QNAP before this one, also using SMB and with the same problem. I thought pretty much all of the Linux based NAS units were using SMB and if that is the problem, it should be widespread, but I don't see any signs of that. Is SMB a problem for geopackage?<div>I did a quick test in QGIS: A dataset of 178.000 line features is rendered in about 1 second from a read only geopackage. When I remove the read only flag, it is rendered in about 5 seconds.</div><div>If I store the geopackage on the local hard drive, the problem disappears, read-write or read-only does not matter.</div><div>I have had suspicions about SMB being part of the problem but I don't know enough about file access deep down in the operating system to understand it.<br clear="all"><div><div dir="ltr" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div><br></div><font color="#000000">Árni Geirsson</font><br></div><div dir="ltr"><font color="#000000"><br></font></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, 16 Mar 2023 at 01:45, jhubbslist--- via QGIS-User <<a href="mailto:qgis-user@lists.osgeo.org" target="_blank">qgis-user@lists.osgeo.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
  
    
  
  <div>
    <div>Árni -</div>
    <div><br>
    </div>
    <div>Are you using SMB/CIFS to access this
      NAS, and are you using wifi or Ethernet to connect to it?</div>
    <div><br>
    </div>
    <div>- Jeff <br>
    </div>
    <div><br>
    </div>
    <div>On 3/15/23 3:30 PM, Árni Geirsson via
      QGIS-User wrote:<br>
    </div>
    <blockquote type="cite">
      <div dir="ltr">Hello all QGIS and geopackage users.
        <div>I store my geopackages on a Synology RackStation NAS unit,
          like all other documents that are kept on a shared drive in
          the office. For larger datasets, the rendering is very slow,
          unless I open the properties dialog for the file in Windows
          and check the read only box. After that, the features are
          rendered blazingly fast. Nothing else is changed to see the
          dramatic difference in the rendering speed. Luckily, I don't
          need to edit many of the larger datasets, such as road
          networks and elevation contours and the geopackage can be kept
          read only. Shapefiles are not affected.</div>
        <div>What explains this and does anyone know how to solve
          the problem? </div>
        <div>Do other users experience this?</div>
        <div>
          <div>
            <div dir="ltr">
              <div dir="ltr">
                <div dir="ltr">
                  <div dir="ltr">
                    <div dir="ltr">
                      <div dir="ltr">
                        <div dir="ltr">
                          <div dir="ltr">
                            <div dir="ltr">
                              <div dir="ltr">
                                <div dir="ltr">
                                  <div dir="ltr">
                                    <div dir="ltr">
                                      <div><br>
                                      </div>
                                      Árni Geirsson<br>
                                    </div>
                                  </div>
                                </div>
                              </div>
                            </div>
                          </div>
                        </div>
                      </div>
                    </div>
                  </div>
                </div>
              </div>
            </div>
          </div>
        </div>
      </div>
      <br>
      <fieldset></fieldset>
      <pre>_______________________________________________
QGIS-User mailing list
<a href="mailto:QGIS-User@lists.osgeo.org" target="_blank">QGIS-User@lists.osgeo.org</a>
List info: <a href="https://lists.osgeo.org/mailman/listinfo/qgis-user" target="_blank">https://lists.osgeo.org/mailman/listinfo/qgis-user</a>
Unsubscribe: <a href="https://lists.osgeo.org/mailman/listinfo/qgis-user" target="_blank">https://lists.osgeo.org/mailman/listinfo/qgis-user</a>
</pre>
    </blockquote>
    <p><br>
    </p>
  </div>

_______________________________________________<br>
QGIS-User mailing list<br>
<a href="mailto:QGIS-User@lists.osgeo.org" target="_blank">QGIS-User@lists.osgeo.org</a><br>
List info: <a href="https://lists.osgeo.org/mailman/listinfo/qgis-user" rel="noreferrer" target="_blank">https://lists.osgeo.org/mailman/listinfo/qgis-user</a><br>
Unsubscribe: <a href="https://lists.osgeo.org/mailman/listinfo/qgis-user" rel="noreferrer" target="_blank">https://lists.osgeo.org/mailman/listinfo/qgis-user</a><br>
</blockquote></div>