[ForestryTools] Forestry-Toolkit Structure
Abdoul O. Dia
dia.abdoul at gmail.com
Sun Jul 28 01:33:03 PDT 2013
Hi Lee,
Sorry for the responding delay. I've been so overloaded these last
weeks. I'm back now and I'll have some time to work on our project. I'll
rework your design picture so I'll put it on the git hub as well suggest
an interface design that we can share.
All the best
Abdoul
Le 2013-06-20 12:05, Lee a écrit :
> Thanks Abdoul,
>
> I'm in agreement. I think it's a good idea to nail down this
> design/framework before going too far. I'm not sure what the best way
> to collaborate on that is, other than for you guys to propose your own
> "pictures" based on my start.
>
> For the most part, I created the attached image to initiate
> discussion. When it comes to software design and build, I make a much
> better soldier than a general. So, chiefly, I look to those of you who
> are most experienced to set the right direction of this project.
>
> On a last note, I do think it is important during this process that we
> "think small." I ascribe to the belief that we should "release early
> and often." For the initial programming, we should look to have the
> smallest workable components. Hopefully then we can generate interest,
> and build community working towards a more robust product.
>
> How are others feeling? Thoughts? How can we refine my proposed framework?
>
>
> --
> All the best,
> Lee
> ISA Certified Arborist MI-4148A
> Registered Forester #46043
>
>
> On Mon, Jun 17, 2013 at 5:00 PM, Abdoul O. Dia <dia.abdoul at gmail.com
> <mailto:dia.abdoul at gmail.com>> wrote:
>
> Hi Lee,
>
> The attachment works well for me. For your previous questions, I
> still believe that we should spend a bit of time on the design to
> make sure that we are heading into the right direction and avoid
> leaving important things a side. We could improve the framework
> that you've suggested. What do you think guys?
>
> Abdoul
>
>
>
> Le 2013-06-16 13:00, Lee a écrit :
>> Let's see if this works. I'm not sure the mailing list likes
>> attachment.
>>
>> Please confirm if this is working or not. If it isn't, I can host
>> the pdf/image somewhere else.
>>
>>
>> --
>> All the best,
>> Lee
>> ISA Certified Arborist MI-4148A
>> Registered Forester #46043
>>
>>
>> On Fri, Jun 14, 2013 at 12:02 PM, Jake Maier <j.m at jmforestry.com
>> <mailto:j.m at jmforestry.com>> wrote:
>>
>> Lee, I think I didn’t get the attachment.
>>
>> Again thank you for facilitating.
>>
>> Jake
>>
>> *From:*forestrytools-bounces at lists.osgeo.org
>> <mailto:forestrytools-bounces at lists.osgeo.org>
>> [mailto:forestrytools-bounces at lists.osgeo.org
>> <mailto:forestrytools-bounces at lists.osgeo.org>] *On Behalf Of
>> *Lee
>> *Sent:* Friday, June 14, 2013 10:44 AM
>> *To:* ForestryTools List
>> *Subject:* Re: [ForestryTools] Forestry-Toolkit Structure
>>
>> Did anyone have a chance to view the attachment? Any
>> thoughts? I'm in no way a software engineer.
>>
>> Thanks guys, have yourself a great weekend!
>>
>> On Jun 6, 2013 6:04 PM, "Lee" <muellerl at gmail.com
>> <mailto:muellerl at gmail.com>> wrote:
>>
>> whoops. Wrong version of the map.
>>
>>
>>
>> --
>> All the best,
>> Lee
>> ISA Certified Arborist MI-4148A
>> Registered Forester #46043
>>
>> On Thu, Jun 6, 2013 at 5:13 PM, Lee <muellerl at gmail.com
>> <mailto:muellerl at gmail.com>> wrote:
>>
>> I'm not sure the list will accept attachments, but let's give
>> this a go.
>>
>>
>> I've put together a simple "project map" on how I see the
>> toolkit's workflow, at least in my head. I'm looking for
>> feedback and consensus moving forward.
>>
>> I tried to use colors within the idea map to describe another
>> level of thinking. I'm not sure how much it worked, but
>> here's the descriptor.
>>
>> Yellow - User input / handled externally.
>>
>> Blue - Internal to Forestry Toolkit
>>
>> Green - Output
>> No color - Handled completely outside QGIS/Forestry-Toolkit
>>
>> Essentially, the blue boxes are the operations/utilities we
>> need to build within Forestry-toolkit. I've tried to use
>> brackets to describe where some of these codes or operations
>> might already partially exist.
>>
>> For example, in reality, we could just force the user to do
>> their plot generation within F-tools. That said, I find
>> F-tools largely inadequate for generating the appropriate
>> plots. It's just not simple or straight-forward enough to use
>> for most forestry aspects. Which is fine, since it wasn't
>> made for that purpose. So we could probably use the F-tools
>> code, refine it, and put it in Forestry-Toolkit for plot
>> generation.
>>
>> So, to dissect what's happening:
>>
>> 1. The user takes a forest parcel and uses Forestry-Toolkit
>> to generate inventory plots.
>>
>> 2. The user goes and collects the information in the field.
>>
>> 3. The user enters the data into an excel spreadsheet or
>> other format which will output a CSV.
>>
>> 4. Forestry toolkit will connect Plot ID between the plot
>> shapefile and inventory CSV. The data will inherit a stand ID
>> from the stand shapefile (spatial join).
>>
>> 6. Forestry Toolkit will run inventory data for each stand.
>>
>> Is this making sense? Is this what we want to do? Is there
>> something we should adjust? For you software guys, is this
>> the best way of doing it?
>>
>> Basically, do we want to move forward with this "design" and
>> better assign some tasks?
>>
>> Let's come to a consensus. I'm trying to facilitate, not lead.
>>
>>
>> --
>> All the best,
>> Lee
>> ISA Certified Arborist MI-4148A
>> Registered Forester #46043
>>
>>
>>
>>
>> _______________________________________________
>> Forestrytools mailing list
>> Forestrytools at lists.osgeo.org <mailto:Forestrytools at lists.osgeo.org>
>> http://lists.osgeo.org/cgi-bin/mailman/listinfo/forestrytools
>
>
> _______________________________________________
> Forestrytools mailing list
> Forestrytools at lists.osgeo.org <mailto:Forestrytools at lists.osgeo.org>
> http://lists.osgeo.org/cgi-bin/mailman/listinfo/forestrytools
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osgeo.org/pipermail/forestrytools/attachments/20130728/e631b778/attachment-0001.html>
More information about the Forestrytools
mailing list