[GRASS-dev] Introduction for GSoC 2017

[Yann]

Hi Stefan and all,

Anybody had the opportunity to try the modules ?

Any feed back?

Cheers,

Yann


On 12/05/2017 10:13, Blumentrath, Stefan wrote:
> Thanks Yann! Great news!
> I will use the modules on tilted digital camera images (from wildlife camera traps).
> But I can check if we have some good aerial photos somewere in a drawer….
>
> Cheers
> Stefan
>
>
> From: Yann Chemin [mailto:dr.yann.chemin at gmail.com]
> Sent: fredag 12. mai 2017 09.19
> To: Blumentrath, Stefan <Stefan.Blumentrath at nina.no>; Luca Delucchi <lucadeluge at gmail.com>
> Cc: GRASS-dev <grass-dev at lists.osgeo.org>; Manan Singh <mananpal42 at gmail.com>
> Subject: Re: [GRASS-dev] Introduction for GSoC 2017
>
> Hi Stefan,
> the first throw is there in SVN, just update and recompile.
> The two GUI are g.gui.iphoto2image and g.gui.iimage2target.
> Finalization of the names are also open to suggestion, so far I just concatenated the old module names in v6 and added to g.gui.
> Please test and if you have a scanned aerial photo with good info about camera and XYZ of fiducials, please throw it my side too so I can validate/finalize the output accuracy.
> Cheers,
> Yann
>
> ----------
> Yann Chemin
> Planetary Scientist
> Latest: https://peerj.com/preprints/2124/
> -----
> JRC: https://www.thefreelibrary.com/3628+-+CANHEMON+Remote+sensing+based+forest+canopy+health+monitoring...-a0453990005
> OSGeo: https://wiki.osgeo.org/wiki/Open_Monitoring_Systems_Working_Group
>
> On 21 March 2017 at 08:31, Yann <dr.yann.chemin at gmail.com<mailto:dr.yann.chemin at gmail.com>> wrote:
> Hi Stefan,
>
> please also launch the main menu: i.ortho.photo at the command line, it tends to be erratic.
>
> (careful the i.photo.2target is not yet existing)
>
> Ciao,
> Yann
>
>
>
> On 21/03/2017 08:04, Blumentrath, Stefan wrote:
> Hi Yann,
>
> Thanks so much! Very cool!
> I will test the photo2image GUI tool ASAP!
>
> Cheers
> Stefan
>
> From: Yann Chemin [mailto:dr.yann.chemin at gmail.com<mailto:dr.yann.chemin at gmail.com>]
> Sent: tirsdag 21. mars 2017 07.56
> To: Luca Delucchi <lucadeluge at gmail.com<mailto:lucadeluge at gmail.com>>
> Cc: GRASS-dev <grass-dev at lists.osgeo.org<mailto:grass-dev at lists.osgeo.org>>; Manan Singh <mananpal42 at gmail.com<mailto:mananpal42 at gmail.com>>; Blumentrath, Stefan <Stefan.Blumentrath at nina.no<mailto:Stefan.Blumentrath at nina.no>>
> Subject: Re: [GRASS-dev] Introduction for GSoC 2017
>
>
> Hi all,
>
> I have added to SVN trunk one of the two missing gui modules of i.ortho.photo recently: g.gui.iphoto2image at the command line launches it. All other modules but one are operational (still not fully tested though), I have already started working on the last one, which is also GUI based.
>
> Cheers,
> Yann
>
> On Mar 20, 2017 5:25 PM, "Luca Delucchi" <lucadeluge at gmail.com<mailto:lucadeluge at gmail.com><mailto:lucadeluge at gmail.com<mailto:lucadeluge at gmail.com>>> wrote:
> On 18 March 2017 at 08:30, Blumentrath, Stefan
> <Stefan.Blumentrath at nina.no<mailto:Stefan.Blumentrath at nina.no><mailto:Stefan.Blumentrath at nina.no<mailto:Stefan.Blumentrath at nina.no>>> wrote:
> Hi,
> Hi,
> Could also porting (competition) of the i.ortho.photo modules (and here
> especially the missing GUI modules around it) to GRASS 7 become scope of
> this GSoC idea?
> I fully support this idea, GUI for i.ortho.photo is the most important
> loss from GRASS 6
>
> Cheers,
>
> Stefan
>
> --
> ciao
> Luca
>
> www.lucadelu.org<http://www.lucadelu.org><http://www.lucadelu.org>
> _______________________________________________
> grass-dev mailing list
> grass-dev at lists.osgeo.org<mailto:grass-dev at lists.osgeo.org><mailto:grass-dev at lists.osgeo.org<mailto:grass-dev at lists.osgeo.org>>
> https://lists.osgeo.org/mailman/listinfo/grass-dev
>
>