> 
> Try using the following commands:
> 
> g.region rast=D_cell
> d.erase
> d.rast D_cell
> 
> Mark Gibb				gibb@hubers.cecer.army.mil
> GIS Training Coordinator
> USACERL
> Champaign, IL
> 

Thanks!!  The projection and zone are screwed up still, but if
I fix them THEN g.region rast=D_cell it works.
> 
> 
> ----- Begin Included Message -----
> 
> >From grass-lists-owner@max.cecer.army.mil Tue Sep 27 14:14:00 1994
> Date: Tue, 27 Sep 94 11:35:59 PDT
> From: sue@ced.berkeley.edu (Susan Huse)
> Sender: grass-lists-owner@max.cecer.army.mil
> Reply-To: grassu-list@max.cecer.army.mil
> Sender: grass-lists-owner@moon.cecer.army.mil.
> Reply-To: grassu-list@moon.cecer.army.mil.
> Precedence: Bulk
> To: grassu-list@max.cecer.army.mil
> Subject: d.mon CELL
> Content-Length: 1869
> 
> Hi, I'm having problems using the CELL monitor.  I would like to 
> create a raster file (with vectors and/or sites drawn in), but
> my D_cell is unusable.  I am using GRASS update version 4.
> Is this a known bug, or am I doing something strange?
> 
> To create the file, I did:
> 
> 	Mapset <sue> in Location <sfbay> 
> 	GRASS 4.1 >  d.mon start=CELL
> 	Graphics driver [CELL] started
> 	Wait for 'READY'
> 	READY
> 	
> 	Mapset <sue> in Location <sfbay> 
> 	GRASS 4.1 > d.rast counties.12
> 	
> 	Mapset <sue> in Location <sfbay> 
> 	GRASS 4.1 > d.vect counties.12
> 	
> 	Vector file [counties.12]
> 	
> 	Selected information from dig header
> 	 Organization:  CEDR
> 	 Map Name:      counties.12
> 	 Source Date:   March 1990
> 	 Orig. Scale:   100090
> 	
> 	 North: 4316917.48
> 	 South: 4073347.14
> 	 East:  689900.02
> 	 West:  442816.8
> 	
> 	Initializing [counties.12] ... Plotting ... Done
> 	
> 	Mapset <sue> in Location <sfbay> 
> 	GRASS 4.1 > d.mon stop=CELL
> 	Monitor 'CELL' terminated
> 
> 
> BUT, when I tried to USE it:
> 
> 	Mapset <sue> in Location <sfbay> 
> 	GRASS 4.1 > d.rast D_cell
> 	WARNING: [D_cell] in mapset [sue] - in different projection than current
> 	         region
> 
> 	WARNING: unable to open raster map [D_cell] in mapset [sue]
> 
> 
> The cellheader looks like (seems a off to me!!):
> 
> 	proj:       -370086
> 	zone:       -370086
> 	north:      479
> 	south:      0
> 	east:       639
> 	west:       0
> 	cols:       639
> 	rows:       479
> 	e-w resol:  1
> 	n-s resol:  1
> 	format:     0
> 	compressed: 1
> 
> 	
> The current region is:
> 	projection: 1 (UTM)
> 	zone:       10
> 	north:      4284800
> 	south:      4095900
> 	east:       648300
> 	west:       494200
> 	nsres:      50
> 	ewres:      50
> 	rows:       3778
> 	cols:       3082
> 
> 
> 
> Just for reference the monitorcap looks like:
> 
> 	CELL:driver/CELL:Create GRASS Raster File: \
> 	     /regis/sw/grass4.1u4/axp/dev/fifo.8a
> 	/regis/sw/grass4.1u4/axp/dev/fifo.8b \
> 	     ::any terminal
> 
> 
> Sue Huse
> REGIS
> UC Berkeley
> 
> 
> ----- End Included Message -----
> 
> 
> 


