[mapguide-commits] r10065 - branches/4.0/MgDev/Doc/landing
svn_mapguide at osgeo.org
svn_mapguide at osgeo.org
Fri Nov 10 10:53:09 PST 2023
Author: jng
Date: 2023-11-10 10:53:08 -0800 (Fri, 10 Nov 2023)
New Revision: 10065
Added:
branches/4.0/MgDev/Doc/landing/bib-dana99.md.tpl
branches/4.0/MgDev/Doc/landing/bib-egenhofer91.md.tpl
branches/4.0/MgDev/Doc/landing/bib-jts14.md.tpl
branches/4.0/MgDev/Doc/landing/bib-ogc96-015r1.md.tpl
branches/4.0/MgDev/Doc/landing/bib-ogc99-049.md.tpl
branches/4.0/MgDev/Doc/landing/bib-osugr.md.tpl
branches/4.0/MgDev/Doc/landing/bib-peat.md.tpl
branches/4.0/MgDev/Doc/landing/collections.md.tpl
branches/4.0/MgDev/Doc/landing/cs-testvalues.md.tpl
branches/4.0/MgDev/Doc/landing/cs-wkttosrs.md.tpl
branches/4.0/MgDev/Doc/landing/feature-properties.md.tpl
branches/4.0/MgDev/Doc/landing/geom-collections.md.tpl
Removed:
branches/4.0/MgDev/Doc/landing/bib-dana99.md
branches/4.0/MgDev/Doc/landing/bib-egenhofer91.md
branches/4.0/MgDev/Doc/landing/bib-jts14.md
branches/4.0/MgDev/Doc/landing/bib-ogc96-015r1.md
branches/4.0/MgDev/Doc/landing/bib-ogc99-049.md
branches/4.0/MgDev/Doc/landing/bib-osugr.md
branches/4.0/MgDev/Doc/landing/bib-peat.md
branches/4.0/MgDev/Doc/landing/collections.md
branches/4.0/MgDev/Doc/landing/cs-testvalues.md
branches/4.0/MgDev/Doc/landing/cs-wkttosrs.md
branches/4.0/MgDev/Doc/landing/feature-properties.md
branches/4.0/MgDev/Doc/landing/geom-collections.md
Log:
#2877: Rename our all conceptual topic markdown documents so they're eligible for mdpreprocess
Deleted: branches/4.0/MgDev/Doc/landing/bib-dana99.md
===================================================================
--- branches/4.0/MgDev/Doc/landing/bib-dana99.md 2023-11-10 18:50:05 UTC (rev 10064)
+++ branches/4.0/MgDev/Doc/landing/bib-dana99.md 2023-11-10 18:53:08 UTC (rev 10065)
@@ -1,5 +0,0 @@
-# Dana99
-
-Dana, P. H., <i>The Geographer's Craft Project</i>, Department of
-Geography, The University of Colorado at Boulder, c1999,
-http://www.colorado.edu/geography/gcraft/notes/datum/datum_f.html
\ No newline at end of file
Copied: branches/4.0/MgDev/Doc/landing/bib-dana99.md.tpl (from rev 10064, branches/4.0/MgDev/Doc/landing/bib-dana99.md)
===================================================================
--- branches/4.0/MgDev/Doc/landing/bib-dana99.md.tpl (rev 0)
+++ branches/4.0/MgDev/Doc/landing/bib-dana99.md.tpl 2023-11-10 18:53:08 UTC (rev 10065)
@@ -0,0 +1,5 @@
+# Dana99
+
+Dana, P. H., <i>The Geographer's Craft Project</i>, Department of
+Geography, The University of Colorado at Boulder, c1999,
+http://www.colorado.edu/geography/gcraft/notes/datum/datum_f.html
\ No newline at end of file
Deleted: branches/4.0/MgDev/Doc/landing/bib-egenhofer91.md
===================================================================
--- branches/4.0/MgDev/Doc/landing/bib-egenhofer91.md 2023-11-10 18:50:05 UTC (rev 10064)
+++ branches/4.0/MgDev/Doc/landing/bib-egenhofer91.md 2023-11-10 18:53:08 UTC (rev 10065)
@@ -1,5 +0,0 @@
-# Egenhofer91
-
-Egenhofer, M.F. and Franzosa, R.D., Point Set Topological
-Spatial Relations, <i>International Journal of Geographical
-Information Systems</i>, vol 5, no 2, 161-174, 1991.
\ No newline at end of file
Copied: branches/4.0/MgDev/Doc/landing/bib-egenhofer91.md.tpl (from rev 10064, branches/4.0/MgDev/Doc/landing/bib-egenhofer91.md)
===================================================================
--- branches/4.0/MgDev/Doc/landing/bib-egenhofer91.md.tpl (rev 0)
+++ branches/4.0/MgDev/Doc/landing/bib-egenhofer91.md.tpl 2023-11-10 18:53:08 UTC (rev 10065)
@@ -0,0 +1,5 @@
+# Egenhofer91
+
+Egenhofer, M.F. and Franzosa, R.D., Point Set Topological
+Spatial Relations, <i>International Journal of Geographical
+Information Systems</i>, vol 5, no 2, 161-174, 1991.
\ No newline at end of file
Deleted: branches/4.0/MgDev/Doc/landing/bib-jts14.md
===================================================================
--- branches/4.0/MgDev/Doc/landing/bib-jts14.md 2023-11-10 18:50:05 UTC (rev 10064)
+++ branches/4.0/MgDev/Doc/landing/bib-jts14.md 2023-11-10 18:53:08 UTC (rev 10065)
@@ -1,9 +0,0 @@
-# JTS14
-
-Vivid Solutions, "JTS Topology Suite Technical Specifications", Version 1.4, 2003. Version 1.4 of this specification at
-
-http://www.geotools.org/Working+with+JTS+Geometries+from+DataStores
-
-The latest version of this specification is at
-
-http://www.vividsolutions.com/JTS/JTSHome.htm
\ No newline at end of file
Copied: branches/4.0/MgDev/Doc/landing/bib-jts14.md.tpl (from rev 10064, branches/4.0/MgDev/Doc/landing/bib-jts14.md)
===================================================================
--- branches/4.0/MgDev/Doc/landing/bib-jts14.md.tpl (rev 0)
+++ branches/4.0/MgDev/Doc/landing/bib-jts14.md.tpl 2023-11-10 18:53:08 UTC (rev 10065)
@@ -0,0 +1,9 @@
+# JTS14
+
+Vivid Solutions, "JTS Topology Suite Technical Specifications", Version 1.4, 2003. Version 1.4 of this specification at
+
+http://www.geotools.org/Working+with+JTS+Geometries+from+DataStores
+
+The latest version of this specification is at
+
+http://www.vividsolutions.com/JTS/JTSHome.htm
\ No newline at end of file
Deleted: branches/4.0/MgDev/Doc/landing/bib-ogc96-015r1.md
===================================================================
--- branches/4.0/MgDev/Doc/landing/bib-ogc96-015r1.md 2023-11-10 18:50:05 UTC (rev 10064)
+++ branches/4.0/MgDev/Doc/landing/bib-ogc96-015r1.md 2023-11-10 18:53:08 UTC (rev 10065)
@@ -1,44 +0,0 @@
-# OGC96015R1
-
-<p>
-OpenGIS Consortium Inc., "The OpenGIS Abstract
-Specification: An Object Model For Interoperable
-Geoprocessing," Revision 1, OpenGIS Project Document Number
-96-015R1, 1966.
-</p>
-
-### Document Notice
-<p>Public documents on the OGC site are provided by the copyright holders under the following license.
-The software or Document Type Definitions (DTDs) associated with OGC specifications are governed
-by the Software Notice. By using and/or copying this document, or the OGC
-document from which this statement is linked, you (the licensee) agree that you have read, understood,
-and will comply with the following terms and conditions:</p>
-
-<p>Permission to use, copy, and distribute the contents of this document, or the OGC document from which
-this statement is linked, in any medium for any purpose and without fee or royalty is hereby granted,
-provided that you include the following on <i>ALL</i> copies of the document, or portions thereof, that you use:</p>
-<ol>
-<li>Include a link or URL to the original OGC document.</li>
-<li>The pre-existing copyright notice of the original author, or if it doesn't exist, a notice
-of the form: "Copyright � <date-of-document> Open Geospatial Consortium, Inc. All Rights Reserved.
-http://www.opengeospatial.org/ogc/document (Hypertext is preferred, but a textual representation is permitted.)</li>
-<li><em>If it exists</em>, the STATUS of the OGC document.</li>
-
-</ol>
-<p>When space permits, inclusion of the full text of this <b>NOTICE</b>should be provided. We request
-that authorship attribution be provided in any software, documents, or other items or products that you
-create pursuant to the implementation of the contents of this document, or any portion thereof.</p>
-<p>No right to create modifications or derivatives of OGC documents is granted pursuant to this license.
-However, if additional requirements (documented in the Copyright FAQ) are
-satisfied, the right to create modifications or derivatives is sometimes granted by the OGC to individuals
-complying with those requirements.</p>
-<p>THIS DOCUMENT IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKE NO REPRESENTATIONS OR WARRANTIES,
-EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
-PURPOSE, NON-INFRINGEMENT, OR TITLE; THAT THE CONTENTS OF THE DOCUMENT ARE SUITABLE FOR ANY PURPOSE; NOR
-THAT THE IMPLEMENTATION OF SUCH CONTENTS WILL NOT INFRINGE ANY THIRD PARTY PATENTS, COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS</p>
-<p>COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF ANY USE OF THE DOCUMENT OR THE PERFORMANCE OR IMPLEMENTATION OF THE CONTENTS THEREOF.</p>
-<p>The name and trademarks of copyright holders may NOT be used in advertising or publicity pertaining to
-this document or its contents without specific, written prior permission. Title to copyright in this document
-will at all times remain with copyright holders.
-</p>
Copied: branches/4.0/MgDev/Doc/landing/bib-ogc96-015r1.md.tpl (from rev 10064, branches/4.0/MgDev/Doc/landing/bib-ogc96-015r1.md)
===================================================================
--- branches/4.0/MgDev/Doc/landing/bib-ogc96-015r1.md.tpl (rev 0)
+++ branches/4.0/MgDev/Doc/landing/bib-ogc96-015r1.md.tpl 2023-11-10 18:53:08 UTC (rev 10065)
@@ -0,0 +1,44 @@
+# OGC96015R1
+
+<p>
+OpenGIS Consortium Inc., "The OpenGIS Abstract
+Specification: An Object Model For Interoperable
+Geoprocessing," Revision 1, OpenGIS Project Document Number
+96-015R1, 1966.
+</p>
+
+### Document Notice
+<p>Public documents on the OGC site are provided by the copyright holders under the following license.
+The software or Document Type Definitions (DTDs) associated with OGC specifications are governed
+by the Software Notice. By using and/or copying this document, or the OGC
+document from which this statement is linked, you (the licensee) agree that you have read, understood,
+and will comply with the following terms and conditions:</p>
+
+<p>Permission to use, copy, and distribute the contents of this document, or the OGC document from which
+this statement is linked, in any medium for any purpose and without fee or royalty is hereby granted,
+provided that you include the following on <i>ALL</i> copies of the document, or portions thereof, that you use:</p>
+<ol>
+<li>Include a link or URL to the original OGC document.</li>
+<li>The pre-existing copyright notice of the original author, or if it doesn't exist, a notice
+of the form: "Copyright � <date-of-document> Open Geospatial Consortium, Inc. All Rights Reserved.
+http://www.opengeospatial.org/ogc/document (Hypertext is preferred, but a textual representation is permitted.)</li>
+<li><em>If it exists</em>, the STATUS of the OGC document.</li>
+
+</ol>
+<p>When space permits, inclusion of the full text of this <b>NOTICE</b>should be provided. We request
+that authorship attribution be provided in any software, documents, or other items or products that you
+create pursuant to the implementation of the contents of this document, or any portion thereof.</p>
+<p>No right to create modifications or derivatives of OGC documents is granted pursuant to this license.
+However, if additional requirements (documented in the Copyright FAQ) are
+satisfied, the right to create modifications or derivatives is sometimes granted by the OGC to individuals
+complying with those requirements.</p>
+<p>THIS DOCUMENT IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKE NO REPRESENTATIONS OR WARRANTIES,
+EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
+PURPOSE, NON-INFRINGEMENT, OR TITLE; THAT THE CONTENTS OF THE DOCUMENT ARE SUITABLE FOR ANY PURPOSE; NOR
+THAT THE IMPLEMENTATION OF SUCH CONTENTS WILL NOT INFRINGE ANY THIRD PARTY PATENTS, COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS</p>
+<p>COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF ANY USE OF THE DOCUMENT OR THE PERFORMANCE OR IMPLEMENTATION OF THE CONTENTS THEREOF.</p>
+<p>The name and trademarks of copyright holders may NOT be used in advertising or publicity pertaining to
+this document or its contents without specific, written prior permission. Title to copyright in this document
+will at all times remain with copyright holders.
+</p>
Deleted: branches/4.0/MgDev/Doc/landing/bib-ogc99-049.md
===================================================================
--- branches/4.0/MgDev/Doc/landing/bib-ogc99-049.md 2023-11-10 18:50:05 UTC (rev 10064)
+++ branches/4.0/MgDev/Doc/landing/bib-ogc99-049.md 2023-11-10 18:53:08 UTC (rev 10065)
@@ -1,45 +0,0 @@
-# OGC99049
-
-<p>
-Open GIS Consortium Inc., "OpenGIS Simple
-Features Specification for SQL", Revision 1.1, OpenGIs
-Project Document 99-049, May 5, 1999. To obtain this
-document, go to http://www.opengeospatial.org/specs/. Click
-on "OpenGIS Specifications," and then click on "Simple
-Features - SQL."
-</p>
-<h3>Document Notice</h3>
-<p>Public documents on the OGC site are provided by the copyright holders under the following license.
-The software or Document Type Definitions (DTDs) associated with OGC specifications are governed
-by the Software Notice. By using and/or copying this document, or the OGC
-document from which this statement is linked, you (the licensee) agree that you have read, understood,
-and will comply with the following terms and conditions:</p>
-
-<p>Permission to use, copy, and distribute the contents of this document, or the OGC document from which
-this statement is linked, in any medium for any purpose and without fee or royalty is hereby granted,
-provided that you include the following on <i>ALL</i> copies of the document, or portions thereof, that you use:</p>
-<ol>
-<li>Include a link or URL to the original OGC document.</li>
-<li>The pre-existing copyright notice of the original author, or if it doesn't exist, a notice
-of the form: "Copyright � <date-of-document> Open Geospatial Consortium, Inc. All Rights Reserved.
-http://www.opengeospatial.org/ogc/document (Hypertext is preferred, but a textual representation is permitted.)</li>
-<li><em>If it exists</em>, the STATUS of the OGC document.</li>
-
-</ol>
-<p>When space permits, inclusion of the full text of this <b>NOTICE</b>should be provided. We request
-that authorship attribution be provided in any software, documents, or other items or products that you
-create pursuant to the implementation of the contents of this document, or any portion thereof.</p>
-<p>No right to create modifications or derivatives of OGC documents is granted pursuant to this license.
-However, if additional requirements (documented in the Copyright FAQ) are
-satisfied, the right to create modifications or derivatives is sometimes granted by the OGC to individuals
-complying with those requirements.</p>
-<p>THIS DOCUMENT IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKE NO REPRESENTATIONS OR WARRANTIES,
-EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
-PURPOSE, NON-INFRINGEMENT, OR TITLE; THAT THE CONTENTS OF THE DOCUMENT ARE SUITABLE FOR ANY PURPOSE; NOR
-THAT THE IMPLEMENTATION OF SUCH CONTENTS WILL NOT INFRINGE ANY THIRD PARTY PATENTS, COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS</p>
-<p>COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF ANY USE OF THE DOCUMENT OR THE PERFORMANCE OR IMPLEMENTATION OF THE CONTENTS THEREOF.</p>
-<p>The name and trademarks of copyright holders may NOT be used in advertising or publicity pertaining to
-this document or its contents without specific, written prior permission. Title to copyright in this document
-will at all times remain with copyright holders.
-</p>
Copied: branches/4.0/MgDev/Doc/landing/bib-ogc99-049.md.tpl (from rev 10064, branches/4.0/MgDev/Doc/landing/bib-ogc99-049.md)
===================================================================
--- branches/4.0/MgDev/Doc/landing/bib-ogc99-049.md.tpl (rev 0)
+++ branches/4.0/MgDev/Doc/landing/bib-ogc99-049.md.tpl 2023-11-10 18:53:08 UTC (rev 10065)
@@ -0,0 +1,45 @@
+# OGC99049
+
+<p>
+Open GIS Consortium Inc., "OpenGIS Simple
+Features Specification for SQL", Revision 1.1, OpenGIs
+Project Document 99-049, May 5, 1999. To obtain this
+document, go to http://www.opengeospatial.org/specs/. Click
+on "OpenGIS Specifications," and then click on "Simple
+Features - SQL."
+</p>
+<h3>Document Notice</h3>
+<p>Public documents on the OGC site are provided by the copyright holders under the following license.
+The software or Document Type Definitions (DTDs) associated with OGC specifications are governed
+by the Software Notice. By using and/or copying this document, or the OGC
+document from which this statement is linked, you (the licensee) agree that you have read, understood,
+and will comply with the following terms and conditions:</p>
+
+<p>Permission to use, copy, and distribute the contents of this document, or the OGC document from which
+this statement is linked, in any medium for any purpose and without fee or royalty is hereby granted,
+provided that you include the following on <i>ALL</i> copies of the document, or portions thereof, that you use:</p>
+<ol>
+<li>Include a link or URL to the original OGC document.</li>
+<li>The pre-existing copyright notice of the original author, or if it doesn't exist, a notice
+of the form: "Copyright � <date-of-document> Open Geospatial Consortium, Inc. All Rights Reserved.
+http://www.opengeospatial.org/ogc/document (Hypertext is preferred, but a textual representation is permitted.)</li>
+<li><em>If it exists</em>, the STATUS of the OGC document.</li>
+
+</ol>
+<p>When space permits, inclusion of the full text of this <b>NOTICE</b>should be provided. We request
+that authorship attribution be provided in any software, documents, or other items or products that you
+create pursuant to the implementation of the contents of this document, or any portion thereof.</p>
+<p>No right to create modifications or derivatives of OGC documents is granted pursuant to this license.
+However, if additional requirements (documented in the Copyright FAQ) are
+satisfied, the right to create modifications or derivatives is sometimes granted by the OGC to individuals
+complying with those requirements.</p>
+<p>THIS DOCUMENT IS PROVIDED "AS IS," AND COPYRIGHT HOLDERS MAKE NO REPRESENTATIONS OR WARRANTIES,
+EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
+PURPOSE, NON-INFRINGEMENT, OR TITLE; THAT THE CONTENTS OF THE DOCUMENT ARE SUITABLE FOR ANY PURPOSE; NOR
+THAT THE IMPLEMENTATION OF SUCH CONTENTS WILL NOT INFRINGE ANY THIRD PARTY PATENTS, COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS</p>
+<p>COPYRIGHT HOLDERS WILL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF ANY USE OF THE DOCUMENT OR THE PERFORMANCE OR IMPLEMENTATION OF THE CONTENTS THEREOF.</p>
+<p>The name and trademarks of copyright holders may NOT be used in advertising or publicity pertaining to
+this document or its contents without specific, written prior permission. Title to copyright in this document
+will at all times remain with copyright holders.
+</p>
Deleted: branches/4.0/MgDev/Doc/landing/bib-osugr.md
===================================================================
--- branches/4.0/MgDev/Doc/landing/bib-osugr.md 2023-11-10 18:50:05 UTC (rev 10064)
+++ branches/4.0/MgDev/Doc/landing/bib-osugr.md 2023-11-10 18:53:08 UTC (rev 10065)
@@ -1,6 +0,0 @@
-# OSUGR
-
-<p>
-"Oracle Spatial User Guide and Reference", 10g -
-Release 1 (10.1), Part No. B10826-01, Dec 2003.
-</p>
Copied: branches/4.0/MgDev/Doc/landing/bib-osugr.md.tpl (from rev 10064, branches/4.0/MgDev/Doc/landing/bib-osugr.md)
===================================================================
--- branches/4.0/MgDev/Doc/landing/bib-osugr.md.tpl (rev 0)
+++ branches/4.0/MgDev/Doc/landing/bib-osugr.md.tpl 2023-11-10 18:53:08 UTC (rev 10065)
@@ -0,0 +1,6 @@
+# OSUGR
+
+<p>
+"Oracle Spatial User Guide and Reference", 10g -
+Release 1 (10.1), Part No. B10826-01, Dec 2003.
+</p>
Deleted: branches/4.0/MgDev/Doc/landing/bib-peat.md
===================================================================
--- branches/4.0/MgDev/Doc/landing/bib-peat.md 2023-11-10 18:50:05 UTC (rev 10064)
+++ branches/4.0/MgDev/Doc/landing/bib-peat.md 2023-11-10 18:53:08 UTC (rev 10065)
@@ -1,6 +0,0 @@
-# Peat
-
-<p>
-Peat, Chris, Heavens Above website,
-http://www.heavens-above.com/gloss.asp?term=azimuth.
-</p>
\ No newline at end of file
Copied: branches/4.0/MgDev/Doc/landing/bib-peat.md.tpl (from rev 10064, branches/4.0/MgDev/Doc/landing/bib-peat.md)
===================================================================
--- branches/4.0/MgDev/Doc/landing/bib-peat.md.tpl (rev 0)
+++ branches/4.0/MgDev/Doc/landing/bib-peat.md.tpl 2023-11-10 18:53:08 UTC (rev 10065)
@@ -0,0 +1,6 @@
+# Peat
+
+<p>
+Peat, Chris, Heavens Above website,
+http://www.heavens-above.com/gloss.asp?term=azimuth.
+</p>
\ No newline at end of file
Deleted: branches/4.0/MgDev/Doc/landing/collections.md
===================================================================
--- branches/4.0/MgDev/Doc/landing/collections.md 2023-11-10 18:50:05 UTC (rev 10064)
+++ branches/4.0/MgDev/Doc/landing/collections.md 2023-11-10 18:53:08 UTC (rev 10065)
@@ -1,18 +0,0 @@
-# Collections
-
-<p>
- One of the functions of collections is to serve as a repository for
- intermediate results. In this role, a collection is a helper class. An
- example is the construction of an MgLineString geometry. From the
- perspective of construction, this geometry is a set of coordinates. The
- sequence of construction is:
-</p>
-<ol>
- <li>create a coordinate</li>
- <li>add coordinate to coordinate collection</li>
- <li>do 1 and 2 until all coordinates created</li>
- <li>create the line string using coordinate collection</li>
-</ol>
-<p>
- See [Geometry Collections](geom-collections.md) for the list of collections used in the construction of geometries.
-</p>
\ No newline at end of file
Copied: branches/4.0/MgDev/Doc/landing/collections.md.tpl (from rev 10064, branches/4.0/MgDev/Doc/landing/collections.md)
===================================================================
--- branches/4.0/MgDev/Doc/landing/collections.md.tpl (rev 0)
+++ branches/4.0/MgDev/Doc/landing/collections.md.tpl 2023-11-10 18:53:08 UTC (rev 10065)
@@ -0,0 +1,18 @@
+# Collections
+
+<p>
+ One of the functions of collections is to serve as a repository for
+ intermediate results. In this role, a collection is a helper class. An
+ example is the construction of an MgLineString geometry. From the
+ perspective of construction, this geometry is a set of coordinates. The
+ sequence of construction is:
+</p>
+<ol>
+ <li>create a coordinate</li>
+ <li>add coordinate to coordinate collection</li>
+ <li>do 1 and 2 until all coordinates created</li>
+ <li>create the line string using coordinate collection</li>
+</ol>
+<p>
+ See [Geometry Collections](geom-collections.md) for the list of collections used in the construction of geometries.
+</p>
\ No newline at end of file
Deleted: branches/4.0/MgDev/Doc/landing/cs-testvalues.md
===================================================================
--- branches/4.0/MgDev/Doc/landing/cs-testvalues.md 2023-11-10 18:50:05 UTC (rev 10064)
+++ branches/4.0/MgDev/Doc/landing/cs-testvalues.md 2023-11-10 18:53:08 UTC (rev 10065)
@@ -1,263 +0,0 @@
-# CSTestValues
-<p>
- These values are used for testing the coordinate system API.
-</p>
-<h2>Geodetic Coordinate System </h2>
-<h3>Used in the PHP Sample Code</h3>
-<p>
- The following well-known text represents a coordinate system
- based on longitude and latitude whose name is "Longitude /
- Latitude (NAD 83)". The horizontal datum used to measure
- positions on the surface of the earth is named "NAD 83". The
- earth's surface is modeled as a squashed sphere. The name of
- the model is "GRS 80". The "GRS 80" model has a semi-major
- axis value of 6378137 and an inverse flattening value of
- 298.257222101. The longitudinal measurement is taken from the
- Greenwich prime meridian. The Greenwich prime meridian is at
- an angle of 0.000000 degrees relative to the reference
- (Greenwich) prime meridian. The unit of measurement is an
- angular type whose name is "Decimal Degree", which can be
- converted to radians by applying the scalar factor of
- 0.01745329251994330.
-</p>
-
-```
-SQL\> select cs_name,srid, wktext from mdsys.cs_srs where srid = 8265;
-cs_name = Longitude / Latitude (NAD 83)
- srid=8265
-wktext=
-GEOGCS [
- "Longitude / Latitude (NAD 83)",
- DATUM
- "NAD 83",
- SPHEROID [
- "GRS 80",
- 6378137,
- 298.257222101
- ]
- ],
- PRIMEM [
- "Greenwich",
- 0.000000
- ],
- UNIT [
- "Decimal Degree",
- 0.01745329251994330
- ]
-]
-```
-<h3>Used in the C# Sample Code</h3>
-<p>
- The following well-known text represents a coordinate system
- based on longitude and latitude whose name is "LL83".
- The horizontal datum used to measure
- positions on the surface of the earth is named "NAD83". The
- earth's surface is modeled as a squashed sphere. The name of
- the model is "GRS 80". The "GRS 80" model has a semi-major
- axis value of 6378137 and an inverse flattening value of
- 298.257222101. The longitudinal measurement is taken from the
- Greenwich prime meridian. The Greenwich prime meridian is at
- an angle of 0.000000 degrees relative to the reference
- (Greenwich) prime meridian. The unit of measurement is an
- angular type whose name is "Decimal Degree", which can be
- converted to radians by applying the scalar factor of
- 0.01745329251994330.
-
-</p>
-```
-GEOGCS [
- "LL83",
- DATUM [
- "NAD83",
- SPHEROID [
- "GRS1980",
- 6378137.000,
- 298.25722210
- ]
- ],
- PRIMEM [
- "Greenwich",
- 0
- ],
- UNIT [
- "Degree",
- 0.01745329251994
- ]
-]
-```
-<h2>Projected Coordinate System </h2>
-<h3>Used in the PHP Sample Code</h3>
-<p>
- The following well-known text represents a projected
- coordinate system whose name is "UTM Zone 18 (NAD 83)". It
- uses a parameterized transform called "Transverse Mercator"
- to transform geographic coordinates into the projected
- coordinates. The source coordinates are expressed in terms of
- a geographic coordinate system whose name is "NAD 83
- (Continental US)." based on longitude and latitude whose name
- is "Longitude / Latitude (NAD 83)". The "Transverse Mercator"
- transform takes three parameters. The name of the first
- parameter is "Scale_Factor", and its value is 0.999600. The
- name of the second parameter is "Central_Meridian", and its
- value is -117.000000. The name of the third parameter is
- "False_Easting", and its value is 500000.000000. The unit of
- measurement is a linear type whose name is "Meter", which can
- be converted to meters by applying the scalar factor of
- 1.000000000000.
-</p>
-```
-SQL\> select cs_name,srid, wktext from mdsys.cs_srs where srid = 82217;
-cs_name=UTM Zone 11 (NAD 83)
-srid=82254
-wktext=
-PROJCS[
- "UTM Zone 18 (NAD 83)",
- GEOGCS [
- "NAD 83 (Continental US)",
- DATUM [
- "NAD 83 (Continental US)",
- SPHEROID [
- "GRS 80",
- 6378137,
- 298.257222101
- ]
- ],
- PRIMEM [
- "Greenwich", 0.000000
- ],
- UNIT [
- "Decimal Degree",
- 0.01745329251994330
- ]
- ],
- PROJECTION [
- "Transverse Mercator"
- ],
- PARAMETER [
- "Scale_Factor",
- 0.999600
- ],
- PARAMETER [
- "Central_Meridian",
- \-75.000000
- ],
- PARAMETER [
- "False_Easting",
- 500000.000000
- ],
- UNIT [
- "Meter",
- 1.000000000000
- ]
-]
-```
-<h3>Used in the C# Sample Code</h3>
-<p>
- The following well-known text represents a projected
- coordinate system whose name is "UTM83-4". It
- uses a parameterized transform called "Transverse Mercator"
- to transform geographic coordinates into the projected
- coordinates. The source coordinates are expressed in terms of
- a geographic coordinate system whose name is "LL83".
- The "Transverse Mercator" transform takes five parameters.
- The name of the first parameter is "false_easting", and its value is 500000.000.
- The name of the second parameter is "false_northing", and its value is 0.000.
- The name of the third parameter is "central_meridian", and its value is -159.00000000000000.
- The name of the fourth parameter is "scale_factor", and its value is 0.9996.
- The name of the fifth parameter is "latitude_of_origin", and its value is 0.000.
- The unit of measurement is a linear type whose name is "Meter", which can
- be converted to meters by applying the scalar factor of 1.000000000000.
-</p>
-```
-PROJCS[
- "UTM83-4",
- GEOGCS[
- "LL83",
- DATUM[
- "NAD83",
- SPHEROID[
- "GRS1980",
- 6378137.000,
- 298.25722210
- ]
- ],
- PRIMEM[
- "Greenwich",
- 0
- ],
- UNIT[
- "Degree",
- 0.017453292519943295
- ]
- ],
- PROJECTION[
- "Transverse_Mercator"
- ],
- PARAMETER[
- "false_easting",
- 500000.000
- ],
- PARAMETER[
- "false_northing",
- 0.000
- ],
- PARAMETER[
- "central_meridian",
- -159.00000000000000
- ],
- PARAMETER[
- "scale_factor",
- 0.9996
- ],
- PARAMETER[
- "latitude_of_origin",
- 0.000
- ],
- UNIT[
- "Meter",
- 1.00000000000000
- ]
-]
-```
-<h2> Arbitrary Coordinate System </h2>
-<p>
- The following well-known text represents a local,
- ungeoreferenced coordinate system whose name is "Non-Earth
- (Mile)." The horizontal datum used to measure positions in
- the coordinate system is named "Local Datum". The type of the
- horizontal datum is 0. The unit of measurement is a linear
- type whose name is "Mile", which can be converted to meters
- by applying the scalar factor of 1.609344e+03. The system has
- two AXIS values indicating that it is two-dimensional. The
- directional value associated with the "X" AXIS signifies that
- "X" increases positively in value moving east from the
- origin. The directional value associated with the "Y" AXIS
- signifies that "Y" increases positively in value moving north
- from the origin.
-</p>
-
-```
-select cs_name, srid, wktext from mdsys.cs_srs where wktext like '%LOCAL_CS%';
-cs_name=Non-Earth (Mile)
-srid=262156
-wktext=
-LOCAL_CS [
- "Non-Earth (Mile)",
- LOCAL_DATUM [
- "Local Datum",
- 0
- ]
- UNIT [
- "Mile",
- 1.609344e+03
- ],
- AXIS [
- "X",
- EAST
- ],
- AXIS[
- "Y",
- NORTH
- ]
-]
-```
Copied: branches/4.0/MgDev/Doc/landing/cs-testvalues.md.tpl (from rev 10064, branches/4.0/MgDev/Doc/landing/cs-testvalues.md)
===================================================================
--- branches/4.0/MgDev/Doc/landing/cs-testvalues.md.tpl (rev 0)
+++ branches/4.0/MgDev/Doc/landing/cs-testvalues.md.tpl 2023-11-10 18:53:08 UTC (rev 10065)
@@ -0,0 +1,263 @@
+# CSTestValues
+<p>
+ These values are used for testing the coordinate system API.
+</p>
+<h2>Geodetic Coordinate System </h2>
+<h3>Used in the PHP Sample Code</h3>
+<p>
+ The following well-known text represents a coordinate system
+ based on longitude and latitude whose name is "Longitude /
+ Latitude (NAD 83)". The horizontal datum used to measure
+ positions on the surface of the earth is named "NAD 83". The
+ earth's surface is modeled as a squashed sphere. The name of
+ the model is "GRS 80". The "GRS 80" model has a semi-major
+ axis value of 6378137 and an inverse flattening value of
+ 298.257222101. The longitudinal measurement is taken from the
+ Greenwich prime meridian. The Greenwich prime meridian is at
+ an angle of 0.000000 degrees relative to the reference
+ (Greenwich) prime meridian. The unit of measurement is an
+ angular type whose name is "Decimal Degree", which can be
+ converted to radians by applying the scalar factor of
+ 0.01745329251994330.
+</p>
+
+```
+SQL\> select cs_name,srid, wktext from mdsys.cs_srs where srid = 8265;
+cs_name = Longitude / Latitude (NAD 83)
+ srid=8265
+wktext=
+GEOGCS [
+ "Longitude / Latitude (NAD 83)",
+ DATUM
+ "NAD 83",
+ SPHEROID [
+ "GRS 80",
+ 6378137,
+ 298.257222101
+ ]
+ ],
+ PRIMEM [
+ "Greenwich",
+ 0.000000
+ ],
+ UNIT [
+ "Decimal Degree",
+ 0.01745329251994330
+ ]
+]
+```
+<h3>Used in the C# Sample Code</h3>
+<p>
+ The following well-known text represents a coordinate system
+ based on longitude and latitude whose name is "LL83".
+ The horizontal datum used to measure
+ positions on the surface of the earth is named "NAD83". The
+ earth's surface is modeled as a squashed sphere. The name of
+ the model is "GRS 80". The "GRS 80" model has a semi-major
+ axis value of 6378137 and an inverse flattening value of
+ 298.257222101. The longitudinal measurement is taken from the
+ Greenwich prime meridian. The Greenwich prime meridian is at
+ an angle of 0.000000 degrees relative to the reference
+ (Greenwich) prime meridian. The unit of measurement is an
+ angular type whose name is "Decimal Degree", which can be
+ converted to radians by applying the scalar factor of
+ 0.01745329251994330.
+
+</p>
+```
+GEOGCS [
+ "LL83",
+ DATUM [
+ "NAD83",
+ SPHEROID [
+ "GRS1980",
+ 6378137.000,
+ 298.25722210
+ ]
+ ],
+ PRIMEM [
+ "Greenwich",
+ 0
+ ],
+ UNIT [
+ "Degree",
+ 0.01745329251994
+ ]
+]
+```
+<h2>Projected Coordinate System </h2>
+<h3>Used in the PHP Sample Code</h3>
+<p>
+ The following well-known text represents a projected
+ coordinate system whose name is "UTM Zone 18 (NAD 83)". It
+ uses a parameterized transform called "Transverse Mercator"
+ to transform geographic coordinates into the projected
+ coordinates. The source coordinates are expressed in terms of
+ a geographic coordinate system whose name is "NAD 83
+ (Continental US)." based on longitude and latitude whose name
+ is "Longitude / Latitude (NAD 83)". The "Transverse Mercator"
+ transform takes three parameters. The name of the first
+ parameter is "Scale_Factor", and its value is 0.999600. The
+ name of the second parameter is "Central_Meridian", and its
+ value is -117.000000. The name of the third parameter is
+ "False_Easting", and its value is 500000.000000. The unit of
+ measurement is a linear type whose name is "Meter", which can
+ be converted to meters by applying the scalar factor of
+ 1.000000000000.
+</p>
+```
+SQL\> select cs_name,srid, wktext from mdsys.cs_srs where srid = 82217;
+cs_name=UTM Zone 11 (NAD 83)
+srid=82254
+wktext=
+PROJCS[
+ "UTM Zone 18 (NAD 83)",
+ GEOGCS [
+ "NAD 83 (Continental US)",
+ DATUM [
+ "NAD 83 (Continental US)",
+ SPHEROID [
+ "GRS 80",
+ 6378137,
+ 298.257222101
+ ]
+ ],
+ PRIMEM [
+ "Greenwich", 0.000000
+ ],
+ UNIT [
+ "Decimal Degree",
+ 0.01745329251994330
+ ]
+ ],
+ PROJECTION [
+ "Transverse Mercator"
+ ],
+ PARAMETER [
+ "Scale_Factor",
+ 0.999600
+ ],
+ PARAMETER [
+ "Central_Meridian",
+ \-75.000000
+ ],
+ PARAMETER [
+ "False_Easting",
+ 500000.000000
+ ],
+ UNIT [
+ "Meter",
+ 1.000000000000
+ ]
+]
+```
+<h3>Used in the C# Sample Code</h3>
+<p>
+ The following well-known text represents a projected
+ coordinate system whose name is "UTM83-4". It
+ uses a parameterized transform called "Transverse Mercator"
+ to transform geographic coordinates into the projected
+ coordinates. The source coordinates are expressed in terms of
+ a geographic coordinate system whose name is "LL83".
+ The "Transverse Mercator" transform takes five parameters.
+ The name of the first parameter is "false_easting", and its value is 500000.000.
+ The name of the second parameter is "false_northing", and its value is 0.000.
+ The name of the third parameter is "central_meridian", and its value is -159.00000000000000.
+ The name of the fourth parameter is "scale_factor", and its value is 0.9996.
+ The name of the fifth parameter is "latitude_of_origin", and its value is 0.000.
+ The unit of measurement is a linear type whose name is "Meter", which can
+ be converted to meters by applying the scalar factor of 1.000000000000.
+</p>
+```
+PROJCS[
+ "UTM83-4",
+ GEOGCS[
+ "LL83",
+ DATUM[
+ "NAD83",
+ SPHEROID[
+ "GRS1980",
+ 6378137.000,
+ 298.25722210
+ ]
+ ],
+ PRIMEM[
+ "Greenwich",
+ 0
+ ],
+ UNIT[
+ "Degree",
+ 0.017453292519943295
+ ]
+ ],
+ PROJECTION[
+ "Transverse_Mercator"
+ ],
+ PARAMETER[
+ "false_easting",
+ 500000.000
+ ],
+ PARAMETER[
+ "false_northing",
+ 0.000
+ ],
+ PARAMETER[
+ "central_meridian",
+ -159.00000000000000
+ ],
+ PARAMETER[
+ "scale_factor",
+ 0.9996
+ ],
+ PARAMETER[
+ "latitude_of_origin",
+ 0.000
+ ],
+ UNIT[
+ "Meter",
+ 1.00000000000000
+ ]
+]
+```
+<h2> Arbitrary Coordinate System </h2>
+<p>
+ The following well-known text represents a local,
+ ungeoreferenced coordinate system whose name is "Non-Earth
+ (Mile)." The horizontal datum used to measure positions in
+ the coordinate system is named "Local Datum". The type of the
+ horizontal datum is 0. The unit of measurement is a linear
+ type whose name is "Mile", which can be converted to meters
+ by applying the scalar factor of 1.609344e+03. The system has
+ two AXIS values indicating that it is two-dimensional. The
+ directional value associated with the "X" AXIS signifies that
+ "X" increases positively in value moving east from the
+ origin. The directional value associated with the "Y" AXIS
+ signifies that "Y" increases positively in value moving north
+ from the origin.
+</p>
+
+```
+select cs_name, srid, wktext from mdsys.cs_srs where wktext like '%LOCAL_CS%';
+cs_name=Non-Earth (Mile)
+srid=262156
+wktext=
+LOCAL_CS [
+ "Non-Earth (Mile)",
+ LOCAL_DATUM [
+ "Local Datum",
+ 0
+ ]
+ UNIT [
+ "Mile",
+ 1.609344e+03
+ ],
+ AXIS [
+ "X",
+ EAST
+ ],
+ AXIS[
+ "Y",
+ NORTH
+ ]
+]
+```
Deleted: branches/4.0/MgDev/Doc/landing/cs-wkttosrs.md
===================================================================
--- branches/4.0/MgDev/Doc/landing/cs-wkttosrs.md 2023-11-10 18:50:05 UTC (rev 10064)
+++ branches/4.0/MgDev/Doc/landing/cs-wkttosrs.md 2023-11-10 18:53:08 UTC (rev 10065)
@@ -1,56 +0,0 @@
-# WKT of SRS
-
-This extended BNF grammar represents the syntax of a
-Well-Known Text (WKT) specification of a Spatial Reference
-System (SRS), also known as a coordinate system. The grammar
-is taken verbatim from OGC01009 and is
-reproduced here for convenience.
-
-```
-<math transform> = <param mt> | <concat mt> | <inv mt> | <passthrough mt>
-<param mt> = PARAM_MT["<classification name>" {,<parameter>}* ]
-<parameter> = PARAMETER["<name>", <value>]
-<value> = <number>
-<concat mt> = CONCAT_MT[<math transform> {,<math transform>}* ]
-<inv mt> = INVERSE_MT[<math transform>]
-<passthrough mt> = PASSTHROUGH_MT[<integer>, <math transform>]
-<coordinate system> = <horz cs> | <geocentric cs> | <vert cs> | <compd cs> | <fitted cs> | <local cs>
-<horz cs> = <geographic cs> | <projected cs>
-<projected cs> = PROJCS["<name>", <geographic cs>, <projection>, {<parameter>,}* <linear unit> {,<twin axes>}{,<authority>}]
-<projection> = PROJECTION["<name>" {,<authority>}]
-<geographic cs> = GEOGCS["<name>", <datum>, <prime meridian>, <angular unit> {,<twin axes>} {,<authority>}]
-<datum> = DATUM["<name>", <spheroid> {,<to wgs84>} {,<authority>}]
-<spheroid> = SPHEROID["<name>", <semi-major axis>, <inverse flattening> {,<authority>}]
-<semi-major axis> = <number>
-<inverse flattening> = <number>
-<prime meridian> = PRIMEM["<name>", <longitude> {,<authority>}]
-<longitude> = <number>
-<angular unit> = <unit>
-<linear unit> = <unit>
-<unit> = UNIT["<name>", <conversion factor> {,<authority>}]
-<conversion factor> = <number>
-<geocentric cs> = GEOCCS["<name>", <datum>, <prime meridian>, <linear unit> {,<axis>, <axis>, <axis>} {,<authority>}]
-<authority> = AUTHORITY["<name>", "<code>"]
-<vert cs> = VERT_CS["<name>", <vert datum>, <linear unit>, {<axis>,} {,<authority>}]
-<vert datum> = VERT_DATUM["<name>", <datum type> {,<authority>}]
-<datum type> = <number>
-<compd cs> = COMPD_CS["<name>", <head cs>, <tail cs> {,<authority>}]
-<head cs> = <coordinate system>
-<tail cs> = <coordinate system>
-<twin axes> = <axis>, <axis>
-<axis> = AXIS["<name>", NORTH | SOUTH | EAST | WEST | UP | DOWN | OTHER]
-<to wgs84s> = TOWGS84[<seven param>]
-<seven param> = <dx>, <dy>, <dz>, <ex>, <ey>, <ez>, <ppm>
-<dx> = <number>
-<dy> = <number>
-<dz> = <number>
-<ex> = <number>
-<ey> = <number>
-<ez> = <number>
-<ppm> = <number>
-<fitted cs> = FITTED_CS["<name>", <to base>, <base cs>]
-<to base> = <math transform>
-<base cs> = <coordinate system>
-<local cs> = LOCAL_CS["<name>", <local datum>, <unit>, <axis>, {,<axis>}* {,<authority>}]
-<local datum> = LOCAL_DATUM["<name>", <datum type> {,<authority>}]
-```
\ No newline at end of file
Copied: branches/4.0/MgDev/Doc/landing/cs-wkttosrs.md.tpl (from rev 10064, branches/4.0/MgDev/Doc/landing/cs-wkttosrs.md)
===================================================================
--- branches/4.0/MgDev/Doc/landing/cs-wkttosrs.md.tpl (rev 0)
+++ branches/4.0/MgDev/Doc/landing/cs-wkttosrs.md.tpl 2023-11-10 18:53:08 UTC (rev 10065)
@@ -0,0 +1,56 @@
+# WKT of SRS
+
+This extended BNF grammar represents the syntax of a
+Well-Known Text (WKT) specification of a Spatial Reference
+System (SRS), also known as a coordinate system. The grammar
+is taken verbatim from OGC01009 and is
+reproduced here for convenience.
+
+```
+<math transform> = <param mt> | <concat mt> | <inv mt> | <passthrough mt>
+<param mt> = PARAM_MT["<classification name>" {,<parameter>}* ]
+<parameter> = PARAMETER["<name>", <value>]
+<value> = <number>
+<concat mt> = CONCAT_MT[<math transform> {,<math transform>}* ]
+<inv mt> = INVERSE_MT[<math transform>]
+<passthrough mt> = PASSTHROUGH_MT[<integer>, <math transform>]
+<coordinate system> = <horz cs> | <geocentric cs> | <vert cs> | <compd cs> | <fitted cs> | <local cs>
+<horz cs> = <geographic cs> | <projected cs>
+<projected cs> = PROJCS["<name>", <geographic cs>, <projection>, {<parameter>,}* <linear unit> {,<twin axes>}{,<authority>}]
+<projection> = PROJECTION["<name>" {,<authority>}]
+<geographic cs> = GEOGCS["<name>", <datum>, <prime meridian>, <angular unit> {,<twin axes>} {,<authority>}]
+<datum> = DATUM["<name>", <spheroid> {,<to wgs84>} {,<authority>}]
+<spheroid> = SPHEROID["<name>", <semi-major axis>, <inverse flattening> {,<authority>}]
+<semi-major axis> = <number>
+<inverse flattening> = <number>
+<prime meridian> = PRIMEM["<name>", <longitude> {,<authority>}]
+<longitude> = <number>
+<angular unit> = <unit>
+<linear unit> = <unit>
+<unit> = UNIT["<name>", <conversion factor> {,<authority>}]
+<conversion factor> = <number>
+<geocentric cs> = GEOCCS["<name>", <datum>, <prime meridian>, <linear unit> {,<axis>, <axis>, <axis>} {,<authority>}]
+<authority> = AUTHORITY["<name>", "<code>"]
+<vert cs> = VERT_CS["<name>", <vert datum>, <linear unit>, {<axis>,} {,<authority>}]
+<vert datum> = VERT_DATUM["<name>", <datum type> {,<authority>}]
+<datum type> = <number>
+<compd cs> = COMPD_CS["<name>", <head cs>, <tail cs> {,<authority>}]
+<head cs> = <coordinate system>
+<tail cs> = <coordinate system>
+<twin axes> = <axis>, <axis>
+<axis> = AXIS["<name>", NORTH | SOUTH | EAST | WEST | UP | DOWN | OTHER]
+<to wgs84s> = TOWGS84[<seven param>]
+<seven param> = <dx>, <dy>, <dz>, <ex>, <ey>, <ez>, <ppm>
+<dx> = <number>
+<dy> = <number>
+<dz> = <number>
+<ex> = <number>
+<ey> = <number>
+<ez> = <number>
+<ppm> = <number>
+<fitted cs> = FITTED_CS["<name>", <to base>, <base cs>]
+<to base> = <math transform>
+<base cs> = <coordinate system>
+<local cs> = LOCAL_CS["<name>", <local datum>, <unit>, <axis>, {,<axis>}* {,<authority>}]
+<local datum> = LOCAL_DATUM["<name>", <datum type> {,<authority>}]
+```
\ No newline at end of file
Deleted: branches/4.0/MgDev/Doc/landing/feature-properties.md
===================================================================
--- branches/4.0/MgDev/Doc/landing/feature-properties.md 2023-11-10 18:50:05 UTC (rev 10064)
+++ branches/4.0/MgDev/Doc/landing/feature-properties.md 2023-11-10 18:53:08 UTC (rev 10065)
@@ -1,26 +0,0 @@
-# Feature Properties
-
-A feature property is a key-value pair where the key is a
-property name as defined in a feature class definition, and
-the value is the property's value. The property's type is one
-of the classes derived from the base class `MgProperty` [!doclinkclass MgProperty]. The
-following list shows the names of the classes derived from
-`MgProperty` and, for each class, the type returned by the
-`GetValue()` method:
-
-| Class | Returns |
-|-------|---------|
-| `MgBlobProperty` [!doclinkclass MgBlobProperty] | `MgByteReader` [!doclinkclass MgByteReader] |
-| `MgBooleanProperty` [!doclinkclass MgBooleanProperty] | `bool` |
-| `MgByteProperty` [!doclinkclass MgByteProperty] | `byte` |
-| `MgClobProperty` [!doclinkclass MgClobProperty] | `MgByteReader` [!doclinkclass MgByteReader] |
-| `MgDateTimeProperty` [!doclinkclass MgDateTimeProperty] | `MgDateTime` [!doclinkclass MgDateTime] |
-| `MgDoubleProperty` [!doclinkclass MgDoubleProperty] | `double` |
-| `MgFeatureProperty` [!doclinkclass MgFeatureProperty] | `MgFeatureReader` [!doclinkclass MgFeatureReader] |
-| `MgGeometryProperty` [!doclinkclass MgGeometryProperty] | `MgByteReader` [!doclinkclass MgByteReader] |
-| `MgInt16Property` [!doclinkclass MgInt16Property] | `int16` |
-| `MgInt32Property` [!doclinkclass MgInt32Property] | `int32` |
-| `MgInt64Property` [!doclinkclass MgInt64Property] | `int64` |
-| `MgRasterProperty` [!doclinkclass MgRasterProperty] | `MgRaster` [!doclinkclass MgRaster] |
-| `MgSingleProperty` [!doclinkclass MgSingleProperty] | `float` |
-| `MgStringProperty` [!doclinkclass MgStringProperty] | `string` |
\ No newline at end of file
Copied: branches/4.0/MgDev/Doc/landing/feature-properties.md.tpl (from rev 10064, branches/4.0/MgDev/Doc/landing/feature-properties.md)
===================================================================
--- branches/4.0/MgDev/Doc/landing/feature-properties.md.tpl (rev 0)
+++ branches/4.0/MgDev/Doc/landing/feature-properties.md.tpl 2023-11-10 18:53:08 UTC (rev 10065)
@@ -0,0 +1,26 @@
+# Feature Properties
+
+A feature property is a key-value pair where the key is a
+property name as defined in a feature class definition, and
+the value is the property's value. The property's type is one
+of the classes derived from the base class `MgProperty` [!doclinkclass MgProperty]. The
+following list shows the names of the classes derived from
+`MgProperty` and, for each class, the type returned by the
+`GetValue()` method:
+
+| Class | Returns |
+|-------|---------|
+| `MgBlobProperty` [!doclinkclass MgBlobProperty] | `MgByteReader` [!doclinkclass MgByteReader] |
+| `MgBooleanProperty` [!doclinkclass MgBooleanProperty] | `bool` |
+| `MgByteProperty` [!doclinkclass MgByteProperty] | `byte` |
+| `MgClobProperty` [!doclinkclass MgClobProperty] | `MgByteReader` [!doclinkclass MgByteReader] |
+| `MgDateTimeProperty` [!doclinkclass MgDateTimeProperty] | `MgDateTime` [!doclinkclass MgDateTime] |
+| `MgDoubleProperty` [!doclinkclass MgDoubleProperty] | `double` |
+| `MgFeatureProperty` [!doclinkclass MgFeatureProperty] | `MgFeatureReader` [!doclinkclass MgFeatureReader] |
+| `MgGeometryProperty` [!doclinkclass MgGeometryProperty] | `MgByteReader` [!doclinkclass MgByteReader] |
+| `MgInt16Property` [!doclinkclass MgInt16Property] | `int16` |
+| `MgInt32Property` [!doclinkclass MgInt32Property] | `int32` |
+| `MgInt64Property` [!doclinkclass MgInt64Property] | `int64` |
+| `MgRasterProperty` [!doclinkclass MgRasterProperty] | `MgRaster` [!doclinkclass MgRaster] |
+| `MgSingleProperty` [!doclinkclass MgSingleProperty] | `float` |
+| `MgStringProperty` [!doclinkclass MgStringProperty] | `string` |
\ No newline at end of file
Deleted: branches/4.0/MgDev/Doc/landing/geom-collections.md
===================================================================
--- branches/4.0/MgDev/Doc/landing/geom-collections.md 2023-11-10 18:50:05 UTC (rev 10064)
+++ branches/4.0/MgDev/Doc/landing/geom-collections.md 2023-11-10 18:53:08 UTC (rev 10065)
@@ -1,17 +0,0 @@
-# Geometry Collections
-
-The following collection classes are used by `MgGeometryFactory` methods in the construction of geometries and geometry components. See the `MgGeometryFactory` description [!doclinkclass MgGeometryFactory] for discussion and illustration of this use.
-
-| Class | |
-|-----------------------------|--------|
-|MgCoordinateCollection |[!doclinkclass MgCoordinateCollection]|
-|MgCurvePolygonCollection |[!doclinkclass MgCurvePolygonCollection]|
-|MgCurveRingCollection |[!doclinkclass MgCurveRingCollection]|
-|MgCurveSegmentCollection |[!doclinkclass MgCurveSegmentCollection]|
-|MgCurveStringCollection |[!doclinkclass MgCurveStringCollection]|
-|MgGeometryCollection |[!doclinkclass MgGeometryCollection]|
-|MgGeometryComponentCollection|[!doclinkclass MgGeometryComponentCollection]|
-|MgLinearRingCollection |[!doclinkclass MgLinearRingCollection]|
-|MgLineStringCollection |[!doclinkclass MgLineStringCollection]|
-|MgPointCollection |[!doclinkclass MgPointCollection]|
-|MgPolygonCollection |[!doclinkclass MgPolygonCollection]|
\ No newline at end of file
Copied: branches/4.0/MgDev/Doc/landing/geom-collections.md.tpl (from rev 10064, branches/4.0/MgDev/Doc/landing/geom-collections.md)
===================================================================
--- branches/4.0/MgDev/Doc/landing/geom-collections.md.tpl (rev 0)
+++ branches/4.0/MgDev/Doc/landing/geom-collections.md.tpl 2023-11-10 18:53:08 UTC (rev 10065)
@@ -0,0 +1,17 @@
+# Geometry Collections
+
+The following collection classes are used by `MgGeometryFactory` methods in the construction of geometries and geometry components. See the `MgGeometryFactory` description [!doclinkclass MgGeometryFactory] for discussion and illustration of this use.
+
+| Class | |
+|-----------------------------|--------|
+|MgCoordinateCollection |[!doclinkclass MgCoordinateCollection]|
+|MgCurvePolygonCollection |[!doclinkclass MgCurvePolygonCollection]|
+|MgCurveRingCollection |[!doclinkclass MgCurveRingCollection]|
+|MgCurveSegmentCollection |[!doclinkclass MgCurveSegmentCollection]|
+|MgCurveStringCollection |[!doclinkclass MgCurveStringCollection]|
+|MgGeometryCollection |[!doclinkclass MgGeometryCollection]|
+|MgGeometryComponentCollection|[!doclinkclass MgGeometryComponentCollection]|
+|MgLinearRingCollection |[!doclinkclass MgLinearRingCollection]|
+|MgLineStringCollection |[!doclinkclass MgLineStringCollection]|
+|MgPointCollection |[!doclinkclass MgPointCollection]|
+|MgPolygonCollection |[!doclinkclass MgPolygonCollection]|
\ No newline at end of file
More information about the mapguide-commits
mailing list