[mapguide-users] WMS Data Viewing

[Thomas M. Tuerke]

As you've noticed, MapGuide WMS understands and supports both CRS and SRS (in anticipation of that upcoming standard.)  The parameter's name has changed between 1.1.1 and 1.3.0, but the concept remains essentially the same.

- Thomas

-----Original Message-----
From: Bart van den Eijnden (OSGIS) [mailto:bartvde at xs4all.nl] 
Sent: Wednesday, May 10, 2006 12:48 PM
To: users at mapguide.osgeo.org
Subject: Re: [mapguide-users] WMS Data Viewing

I tried this and it does work with a request in the browser, and also in 
Gaia after setting the correct bounding box. See attached image.

http://127.0.0.1:8008/mapguide/mapagent/mapagent.fcgi?REQUEST=GetMap&SERVICE=WMS&VERSION=1.1.1&LAYERS=Samples/Sheboygan/Layers/Parcels&BBOX=-87.737867,43.745720,-87.733127,43.749530&SRS=EPSG:4326&WIDTH=600&HEIGHT=600&BGCOLOR=0x0000FF&TRANSPARENT=FALSE&FORMAT=image/png

Btw, in your example request you had CRS, which is WMS 1.3, for WMS 
1.1.1 it is SRS instead.

Best regards,
Bart

Chris Claydon wrote:

>Hi Joy,
>
>If you enter a simple WMS request in a browser, does it work?
>
>Something like this (for Sheboygan Parcels layer):
>
>http://204.244.79.27/mapguide/mapagent/mapagent.fcgi?REQUEST=GetMap&SERV
>ICE=WMS&VERSION=1.1.1&LAYERS=Samples/Sheboygan/Layers/Parcels&BBOX=-87.7
>37867,43.745720,-87.733127,43.749530&CRS=EPSG:4326&WIDTH=600&HEIGHT=600&
>BGCOLOR=0x0000FF&TRANSPARENT=FALSE&FORMAT=image/PNG
>
>I tried it myself, but it looks like your server is not currently
>running.
>
>Chris Claydon.
>
>
>-----Original Message-----
>From: Scott Hameister [mailto:scotth at mpower-tech.com] 
>Sent: Wednesday, May 10, 2006 8:29 AM
>To: users at mapguide.osgeo.org
>Subject: RE: [mapguide-users] WMS Data Viewing
>
>I was able to see your Hydrology using GAIA 2.0.5 and the link you
>provided
>to view it....I also was able to see it in Mapguide Studio...Not sure
>why
>ArcMap is being stubborn...No luck with the Sheboygan stuff though
>
>Scott Hameister
>Director of Product Development
>mPower Technologies
>scotth at mpower-tech.com
>T: 877-269-6971| T: 920-830-4053
>
>mPower Technologies
>501 S Nicolet Road Appleton, WI 54914
>http://mpower-tech.com
>-----Original Message-----
>From: Joy Appler [mailto:jappler at my.bcit.ca] 
>Sent: Tuesday, May 09, 2006 7:13 PM
>To: users at mapguide.osgeo.org
>Subject: [mapguide-users] WMS Data Viewing
>
>  I have established a wms connection from MapGuide to ArcMap, however 
>I am unable to view the layers in the viewer.  The layers that I have 
>published to wms are listed in the left hand column in ArcMap, with 
>black check marks beside them, but nothing I've tried so far has let me 
>view them.  I'm even trying to view the Sheboygan sample data and 
>nothing!  Does anyone have any ideas as to where I am going wrong.  The 
>path I am using in ArcMap for the wms is: 
>http://204.244.79.27/mapguide/mapagent/mapagent.fcgi?service=WMS&version
>=1.1
>&
>
>Joy.
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: users-unsubscribe at mapguide.osgeo.org
>For additional commands, e-mail: users-help at mapguide.osgeo.org
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: users-unsubscribe at mapguide.osgeo.org
>For additional commands, e-mail: users-help at mapguide.osgeo.org
>
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: users-unsubscribe at mapguide.osgeo.org
>For additional commands, e-mail: users-help at mapguide.osgeo.org
>
>
>
>
>  
>


-- 
Bart van den Eijnden
OSGIS, Open Source GIS
http://www.osgis.nl