[mapguide-users] Firewall Settings

[Campbell, Keith A]

Thanks Stefan.
 
Is that with MapGuide Studio?
 
Keith

________________________________

From: Stefan.Reuschel at dataprocess.de
[mailto:Stefan.Reuschel at dataprocess.de] 
Sent: 09 November 2006 13:37
To: users at mapguide.osgeo.org
Subject: AW: [mapguide-users] Firewall Settings


...none, I think. The only communication port between server and client
should be 8008; 280x is for "internal" communication of the ressource
servers.
With Studio and webbrowser, e.g., I should be able to access all
definitions, data etc. through a firewall with open port 8008.

Stefan


________________________________

Von: Campbell, Keith A [mailto:keith.campbell at atkinsglobal.com] 
Gesendet: Donnerstag, 9. November 2006 14:22
An: users at mapguide.osgeo.org
Betreff: [mapguide-users] Firewall Settings



What would be the effect on a MapGuide application of the firewall
blocking ports 2800, 2801 and 2802? 

Keith 



This email and any attached files are confidential and copyright
protected. If you are not the addressee, any dissemination of this
communication is strictly prohibited. Unless otherwise expressly agreed
in writing, nothing stated in this communication shall be legally
binding. <http://www.blackspider.com/> 



This message has been scanned for viruses by MailControl
<http://bluepages.wsatkins.co.uk/?4318150> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.osgeo.org/pipermail/mapguide_users/attachments/20061109/b1e6cc51/attachment.html