From bob.basques at ci.stpaul.mn.us Mon Jul 11 09:11:08 2022 From: bob.basques at ci.stpaul.mn.us (Basques, Bob (CI-StPaul)) Date: Mon, 11 Jul 2022 16:11:08 +0000 Subject: [mapserver-users] Need presenter(s) for next local Twin Cities OSGeo local chapter meeting Message-ID: All, Looking for presenter for upcoming virtual, Local OSGeo Chapter meeting. Just send me a Presenter Bio and Title for a presentation on anything Geo, and I?ll handle the rest. When July 13th, 4:30 pm CDT Thanks Bobb -------------- next part -------------- An HTML attachment was scrubbed... URL: From bob.basques at ci.stpaul.mn.us Tue Jul 12 13:49:24 2022 From: bob.basques at ci.stpaul.mn.us (Basques, Bob (CI-StPaul)) Date: Tue, 12 Jul 2022 20:49:24 +0000 Subject: [mapserver-users] Need presenter(s) for next local Twin Cities OSGeo local chapter meeting Message-ID: <4BEC154B-DAC4-449D-94F9-C44B8EEF623B@ci.stpaul.mn.us> All, Haven?t heard back from anyone yet for a volunteer presenter for our next meeting tomorrow. I don?t have anything in the can from myself, and only have a few current projects that are only half completed and not ready for showing off to anyone (yet). The summer sessions have always been harder to fill out, so not really surprising to me. I?ll leave the invitation open until tomorrow mid-day, at which time, if I don?t get a volunteer, I?ll cancel the meeting for this month. Bobb All, Looking for presenter for upcoming virtual, Local OSGeo Chapter meeting. Just send me a Presenter Bio and Title for a presentation on anything Geo, and I?ll handle the rest. When July 13th, 4:30 pm CDT Thanks Bobb -------------- next part -------------- An HTML attachment was scrubbed... URL: From bob.basques at ci.stpaul.mn.us Wed Jul 13 09:48:09 2022 From: bob.basques at ci.stpaul.mn.us (Basques, Bob (CI-StPaul)) Date: Wed, 13 Jul 2022 16:48:09 +0000 Subject: [mapserver-users] [CANCELLING] Twin Cities, OSGeo Local Chapter Meeting for Jul 13th, 2022 Message-ID: All, No volunteers have come forward for presenting later today, so I?m canceling the meeting for this month. As always, looking for presenters for this monthly meetings. Can be anything Geo-related. Just send me a Bio and presentation title and I?ll handle the rest. Our next meeting will be August 10th (Second Wednesday of the month) Time: 4:30 ? 6:00 Note/group survey: I have the last couple of presentations ready to publish, but my online service is a bit flaky, so trying to figure out a new location. I?m wondering about posting the presentations to a You-Tube Channel. I?ll send out a survey for this right after this Email. Bobb All, Haven?t heard back from anyone yet for a volunteer presenter for our next meeting tomorrow. I don?t have anything in the can from myself, and only have a few current projects that are only half completed and not ready for showing off to anyone (yet). The summer sessions have always been harder to fill out, so not really surprising to me. I?ll leave the invitation open until tomorrow mid-day, at which time, if I don?t get a volunteer, I?ll cancel the meeting for this month. Bobb All, Looking for presenter for upcoming virtual, Local OSGeo Chapter meeting. Just send me a Presenter Bio and Title for a presentation on anything Geo, and I?ll handle the rest. When July 13th, 4:30 pm CDT Thanks Bobb -------------- next part -------------- An HTML attachment was scrubbed... URL: From bob.basques at ci.stpaul.mn.us Wed Jul 13 09:48:12 2022 From: bob.basques at ci.stpaul.mn.us (Basques, Bob (CI-StPaul)) Date: Wed, 13 Jul 2022 16:48:12 +0000 Subject: [mapserver-users] [SURVEY] Publishing of Twin Cities, OSGeo Local Chapter Meeting Recordings Message-ID: <0EEA0B14-85C3-48C5-9C03-8EEFB6B2E9BA@ci.stpaul.mn.us> All, I?ve been publishing our past meeting recording links on my own, but the hardware it?s on is nearing end of life. It?s been down for a couple of weeks now, and I was pondering publishing our presentations to a You-Tube Channel. I think this will make things easier on the maint. and publishing, and also allow for a little better handling, of metadata aspects. This should also make it easier for everyone in our groups to direct people to our presentations in the past, present, and future to promote our efforts to date. I also have some old presentations that I did, saved from meetings way back in the day (When we were TCMUG) that I would like to park somewhere, probably as a retrospective. So, can you reply to this Email with a +1 if in favor or -1 if not. Go ahead and add any comments as well for reasoning. Even if it?s decided that it?s a good idea, I?ll still get an individual signoff from each presenter before posting anything. Bobb Get me in Teams PW19-S295-C024 -------------- next part -------------- An HTML attachment was scrubbed... URL: From klassen.js at gmail.com Wed Jul 13 09:51:43 2022 From: klassen.js at gmail.com (James Klassen) Date: Wed, 13 Jul 2022 11:51:43 -0500 Subject: [mapserver-users] [GeoMoose-users] [SURVEY] Publishing of Twin Cities, OSGeo Local Chapter Meeting Recordings In-Reply-To: <0EEA0B14-85C3-48C5-9C03-8EEFB6B2E9BA@ci.stpaul.mn.us> References: <0EEA0B14-85C3-48C5-9C03-8EEFB6B2E9BA@ci.stpaul.mn.us> Message-ID: My comment is to first coordinate with OSGeo as there is already likely an established process/location for this sort of thing. On Wed, Jul 13, 2022 at 11:49 Basques, Bob (CI-StPaul) < bob.basques at ci.stpaul.mn.us> wrote: > All, > > > > I?ve been publishing our past meeting recording links on my own, but the > hardware it?s on is nearing end of life. It?s been down for a couple of > weeks now, and I was pondering publishing our presentations to a You-Tube > Channel. I think this will make things easier on the maint. and > publishing, and also allow for a little better handling, of metadata > aspects. This should also make it easier for everyone in our groups to > direct people to our presentations in the past, present, and future to > promote our efforts to date. I also have some old presentations that I > did, saved from meetings way back in the day (When we were TCMUG) that I > would like to park somewhere, probably as a retrospective. > > > > So, can you reply to this Email with a +1 if in favor or -1 if not. Go > ahead and add any comments as well for reasoning. Even if it?s decided > that it?s a good idea, I?ll still get an individual signoff from each > presenter before posting anything. > > > > Bobb > > > > > > > > Get me in Teams > > > *PW19-S295-C024* > > > > > _______________________________________________ > GeoMoose-users mailing list > GeoMoose-users at lists.osgeo.org > https://lists.osgeo.org/mailman/listinfo/geomoose-users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bob.basques at ci.stpaul.mn.us Wed Jul 13 10:09:53 2022 From: bob.basques at ci.stpaul.mn.us (Basques, Bob (CI-StPaul)) Date: Wed, 13 Jul 2022 17:09:53 +0000 Subject: [mapserver-users] [GeoMoose-users] [SURVEY] Publishing of Twin Cities, OSGeo Local Chapter Meeting Recordings In-Reply-To: References: <0EEA0B14-85C3-48C5-9C03-8EEFB6B2E9BA@ci.stpaul.mn.us> Message-ID: <678393A9-29D6-4E54-AEDA-6F9BC13A345E@ci.stpaul.mn.us> Jim, I?ve asked a few times on the Discuss list. Originally they were using Vimeo, but I think they changed their usage rules, and there was some discussion about where to move stuff to. Either way, I?ve not gotten and suggestions about where to publish videos. I can try again. Bobb From: Jim Klassen Date: Wednesday, July 13, 2022 at 11:51 AM To: Bob Basques Cc: "geomoose-users at lists.osgeo.org" , "mapserver-users at lists.osgeo.org" , tcmug Subject: Re: [GeoMoose-users] [SURVEY] Publishing of Twin Cities, OSGeo Local Chapter Meeting Recordings Think Before You Click: This email originated outside our organization. My comment is to first coordinate with OSGeo as there is already likely an established process/location for this sort of thing. On Wed, Jul 13, 2022 at 11:49 Basques, Bob (CI-StPaul) > wrote: All, I?ve been publishing our past meeting recording links on my own, but the hardware it?s on is nearing end of life. It?s been down for a couple of weeks now, and I was pondering publishing our presentations to a You-Tube Channel. I think this will make things easier on the maint. and publishing, and also allow for a little better handling, of metadata aspects. This should also make it easier for everyone in our groups to direct people to our presentations in the past, present, and future to promote our efforts to date. I also have some old presentations that I did, saved from meetings way back in the day (When we were TCMUG) that I would like to park somewhere, probably as a retrospective. So, can you reply to this Email with a +1 if in favor or -1 if not. Go ahead and add any comments as well for reasoning. Even if it?s decided that it?s a good idea, I?ll still get an individual signoff from each presenter before posting anything. Bobb Get me in Teams PW19-S295-C024 _______________________________________________ GeoMoose-users mailing list GeoMoose-users at lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/geomoose-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From richard.greenwood at gmail.com Wed Jul 13 17:07:45 2022 From: richard.greenwood at gmail.com (Richard Greenwood) Date: Wed, 13 Jul 2022 18:07:45 -0600 Subject: [mapserver-users] [GeoMoose-users] [SURVEY] Publishing of Twin Cities, OSGeo Local Chapter Meeting Recordings In-Reply-To: <678393A9-29D6-4E54-AEDA-6F9BC13A345E@ci.stpaul.mn.us> References: <0EEA0B14-85C3-48C5-9C03-8EEFB6B2E9BA@ci.stpaul.mn.us> <678393A9-29D6-4E54-AEDA-6F9BC13A345E@ci.stpaul.mn.us> Message-ID: +1 Bob, I really appreciate the effort you put into this and wish that I participated more. Rich On Wed, Jul 13, 2022, 11:10 AM Basques, Bob (CI-StPaul) < bob.basques at ci.stpaul.mn.us> wrote: > Jim, > > > > I?ve asked a few times on the Discuss list. Originally they were using > Vimeo, but I think they changed their usage rules, and there was some > discussion about where to move stuff to. > > > > Either way, I?ve not gotten and suggestions about where to publish > videos. I can try again. > > > > Bobb > > > > > > > > *From: *Jim Klassen > *Date: *Wednesday, July 13, 2022 at 11:51 AM > *To: *Bob Basques > *Cc: *"geomoose-users at lists.osgeo.org" , " > mapserver-users at lists.osgeo.org" , tcmug > > *Subject: *Re: [GeoMoose-users] [SURVEY] Publishing of Twin Cities, OSGeo > Local Chapter Meeting Recordings > > > > *Think Before You Click: *This email originated *outside *our > organization. > > > > > > My comment is to first coordinate with OSGeo as there is already likely an > established process/location for this sort of thing. > > > > On Wed, Jul 13, 2022 at 11:49 Basques, Bob (CI-StPaul) < > bob.basques at ci.stpaul.mn.us> wrote: > > All, > > > > I?ve been publishing our past meeting recording links on my own, but the > hardware it?s on is nearing end of life. It?s been down for a couple of > weeks now, and I was pondering publishing our presentations to a You-Tube > Channel. I think this will make things easier on the maint. and > publishing, and also allow for a little better handling, of metadata > aspects. This should also make it easier for everyone in our groups to > direct people to our presentations in the past, present, and future to > promote our efforts to date. I also have some old presentations that I > did, saved from meetings way back in the day (When we were TCMUG) that I > would like to park somewhere, probably as a retrospective. > > > > So, can you reply to this Email with a +1 if in favor or -1 if not. Go > ahead and add any comments as well for reasoning. Even if it?s decided > that it?s a good idea, I?ll still get an individual signoff from each > presenter before posting anything. > > > > Bobb > > > > > > > > Get me in Teams > > > *PW19-S295-C024* > > > > > > _______________________________________________ > GeoMoose-users mailing list > GeoMoose-users at lists.osgeo.org > https://lists.osgeo.org/mailman/listinfo/geomoose-users > > _______________________________________________ > MapServer-users mailing list > MapServer-users at lists.osgeo.org > https://lists.osgeo.org/mailman/listinfo/mapserver-users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From schroeter at netgis.de Thu Jul 21 02:54:29 2022 From: schroeter at netgis.de (Sven Schroeter) Date: Thu, 21 Jul 2022 11:54:29 +0200 Subject: [mapserver-users] Mapserver 8, PHP 8 and Mapscript Message-ID: <0059d60f-13d3-48cc-12a2-5283de7243a1@netgis.de> Hi, I have a Problem compiling with Mapserver 8, PHP 8 and Mapscript on Debian 11 Bullseye I have downloaded Mapserver 8.0 beta and configured it as follows: |cmake-DCMAKE_INSTALL_PREFIX=/opt \| |-DCMAKE_PREFIX_PATH=/usr/local:/opt \| |-DWITH_CLIENT_WFS=ON \| |-DWITH_CLIENT_WMS=ON \| |-DWITH_WCS=ON \| |-DWITH_THREAD_SAFETY=ON \| |-DWITH_PHP=ON \| |-DWITH_KML=ON \| |-DWITH_GEOS=ON \| |-DWITH_GDAL=ON \| |-DWITH_OGR=ON \| |-DWITH_PROJ=ON \| |-DWITH_CAIRO=ON \| |-DWITH_POSTGIS=ON \| |-DWITH_CURL=ON \| |-DWITH_SOS=ON \| |-DWITH_XMLMAPFILE=0 \| |-DWITH_FCGI=ON \| |-DWITH_LIBXML2=ON \| |-DWITH_GIF=ON \| |-DWITH_FRIBIDI=0 \| |-DWITH_HARFBUZZ=0 \| |-DWITH_PROTOBUFC=0 \| |-DWITH_PYTHON=OFF \| |-DWITH_SVGCAIRO=OFF \| |..| ?When I use Mapserver 7.6.4 in the same setup, the following lines appear: -- /usr/include/php/20200930/main -- Found PHP-Version 8.0.21 (using /usr/bin/php-config) In Mapserver 8 these are missing and accordingly the output in mapscripts is: --* Mapscripts --* Python: disabled --* PHPNG: disabled That means PHP is not activated. In comparison the output with Mapserver 7.6.4: --* Mapscripts --* Python: disabled --* PHP: ENABLED --* PHPNG: disabled It is the same server with the same installation components. Accordingly, in a make and make under Version 8 install PHP Mapscript is not installed. php - v generates the following Unable to load dynamic library 'php_mapscript.so' (tried: /usr/lib/php/20200930/php_mapscript.so (/usr/lib/php/20200930/php_mapscript.so: cannot open shared object file: No such file or directory), /usr/lib/php/20200930/php_mapscript.so.so (/usr/lib/php/20200930/php_mapscript.so.so: cannot open shared object file: No such file or directory)) in Unknown on line 0 Note: PHP is installed with FPM module (php8.0-fpm) and instead of mpm_prefork mpm_event is used. Any idea? Thanks Sven -------------- next part -------------- An HTML attachment was scrubbed... URL: From jmckenna at gatewaygeomatics.com Thu Jul 21 06:00:07 2022 From: jmckenna at gatewaygeomatics.com (Jeff McKenna) Date: Thu, 21 Jul 2022 10:00:07 -0300 Subject: [mapserver-users] Mapserver 8, PHP 8 and Mapscript In-Reply-To: <0059d60f-13d3-48cc-12a2-5283de7243a1@netgis.de> References: <0059d60f-13d3-48cc-12a2-5283de7243a1@netgis.de> Message-ID: <0d9543c2-2dfd-528b-f60c-d573df0b684f@gatewaygeomatics.com> Hi Sven, For MapServer 8 (and beyond) you will need to enable the switch "-DWITH_PHPNG" to enable PHP MapScript through SWIG, as the old unmaintained PHP native MapScript has been removed for MapServer 8. (I hope I am understanding your question correctly) Thanks, -jeff -- Jeff McKenna GatewayGeo: Developers of MS4W, MapServer Consulting and Training co-founder of FOSS4G http://gatewaygeo.com/ On 2022-07-21 6:54 a.m., Sven Schroeter wrote: > Hi, > > I have a Problem compiling with Mapserver 8, PHP 8 and Mapscript on > Debian 11 Bullseye > > I have downloaded Mapserver 8.0 beta and configured it as follows: > > |cmake-DCMAKE_INSTALL_PREFIX=/opt \| > > |-DCMAKE_PREFIX_PATH=/usr/local:/opt \| > > |-DWITH_CLIENT_WFS=ON \| > > |-DWITH_CLIENT_WMS=ON \| > > |-DWITH_WCS=ON \| > > |-DWITH_THREAD_SAFETY=ON \| > > |-DWITH_PHP=ON \| > > |-DWITH_KML=ON \| > > |-DWITH_GEOS=ON \| > > |-DWITH_GDAL=ON \| > > |-DWITH_OGR=ON \| > > |-DWITH_PROJ=ON \| > > |-DWITH_CAIRO=ON \| > > |-DWITH_POSTGIS=ON \| > > |-DWITH_CURL=ON \| > > |-DWITH_SOS=ON \| > > |-DWITH_XMLMAPFILE=0 \| > > |-DWITH_FCGI=ON \| > > |-DWITH_LIBXML2=ON \| > > |-DWITH_GIF=ON \| > > |-DWITH_FRIBIDI=0 \| > > |-DWITH_HARFBUZZ=0 \| > > |-DWITH_PROTOBUFC=0 \| > > |-DWITH_PYTHON=OFF \| > > |-DWITH_SVGCAIRO=OFF \| > > |..| > > ?When I use Mapserver 7.6.4 in the same setup, the following lines appear: > > -- /usr/include/php/20200930/main > > -- Found PHP-Version 8.0.21 (using /usr/bin/php-config) > > In Mapserver 8 these are missing and accordingly the output in > mapscripts is: > > --* Mapscripts > > --* Python: disabled > > --* PHPNG: disabled > > That means PHP is not activated. In comparison the output with Mapserver > 7.6.4: > > --* Mapscripts > > --* Python: disabled > > --* PHP: ENABLED > > --* PHPNG: disabled > > It is the same server with the same installation components. > Accordingly, in a make and make under Version 8 install PHP Mapscript is > not installed. > > php - v generates the following > > Unable to load dynamic library 'php_mapscript.so' (tried: > /usr/lib/php/20200930/php_mapscript.so > (/usr/lib/php/20200930/php_mapscript.so: cannot open shared object file: > No such file or directory), /usr/lib/php/20200930/php_mapscript.so.so > (/usr/lib/php/20200930/php_mapscript.so.so: cannot open shared object > file: No such file or directory)) in Unknown on line 0 > > Note: PHP is installed with FPM module (php8.0-fpm) and instead of > mpm_prefork mpm_event is used. > > > Any idea? > > Thanks Sven > > > From jmckenna at gatewaygeomatics.com Thu Jul 21 06:12:06 2022 From: jmckenna at gatewaygeomatics.com (Jeff McKenna) Date: Thu, 21 Jul 2022 10:12:06 -0300 Subject: [mapserver-users] Mapserver 8, PHP 8 and Mapscript In-Reply-To: <0d9543c2-2dfd-528b-f60c-d573df0b684f@gatewaygeomatics.com> References: <0059d60f-13d3-48cc-12a2-5283de7243a1@netgis.de> <0d9543c2-2dfd-528b-f60c-d573df0b684f@gatewaygeomatics.com> Message-ID: <736eb42d-6f5b-83a7-8e31-161b4ee49016@gatewaygeomatics.com> I should also add here, as you mention PHP 8: I did much effort recently to upgrade the continuous build systems (TravisCI, GitHub action) so that various PHP versions are now tested for PHPNG MapScript, including PHP 8.1.x, and re-enabled PHPUnit tests that test each MapScript object, every time a pull request or commit is made to the project repository. (you can find those tests inside /msautotest/php/ and follow the README there) More tests are warmly welcomed of course! :) Thanks, -jeff -- Jeff McKenna GatewayGeo: Developers of MS4W, MapServer Consulting and Training co-founder of FOSS4G http://gatewaygeo.com/ On 2022-07-21 10:00 a.m., Jeff McKenna wrote: > Hi Sven, > > For MapServer 8 (and beyond) you will need to enable the switch > "-DWITH_PHPNG" to enable PHP MapScript through SWIG, as the old > unmaintained PHP native MapScript has been removed for MapServer 8. > > (I hope I am understanding your question correctly) > > Thanks, > > -jeff > > > > > -- > Jeff McKenna > GatewayGeo: Developers of MS4W, MapServer Consulting and Training > co-founder of FOSS4G > http://gatewaygeo.com/ > > > > On 2022-07-21 6:54 a.m., Sven Schroeter wrote: >> Hi, >> >> I have a Problem compiling with Mapserver 8, PHP 8 and Mapscript on >> Debian 11 Bullseye >> >> I have downloaded Mapserver 8.0 beta and configured it as follows: >> >> |cmake-DCMAKE_INSTALL_PREFIX=/opt \| >> >> |-DCMAKE_PREFIX_PATH=/usr/local:/opt \| >> >> |-DWITH_CLIENT_WFS=ON \| >> >> |-DWITH_CLIENT_WMS=ON \| >> >> |-DWITH_WCS=ON \| >> >> |-DWITH_THREAD_SAFETY=ON \| >> >> |-DWITH_PHP=ON \| >> >> |-DWITH_KML=ON \| >> >> |-DWITH_GEOS=ON \| >> >> |-DWITH_GDAL=ON \| >> >> |-DWITH_OGR=ON \| >> >> |-DWITH_PROJ=ON \| >> >> |-DWITH_CAIRO=ON \| >> >> |-DWITH_POSTGIS=ON \| >> >> |-DWITH_CURL=ON \| >> >> |-DWITH_SOS=ON \| >> >> |-DWITH_XMLMAPFILE=0 \| >> >> |-DWITH_FCGI=ON \| >> >> |-DWITH_LIBXML2=ON \| >> >> |-DWITH_GIF=ON \| >> >> |-DWITH_FRIBIDI=0 \| >> >> |-DWITH_HARFBUZZ=0 \| >> >> |-DWITH_PROTOBUFC=0 \| >> >> |-DWITH_PYTHON=OFF \| >> >> |-DWITH_SVGCAIRO=OFF \| >> >> |..| >> >> ??When I use Mapserver 7.6.4 in the same setup, the following lines >> appear: >> >> -- /usr/include/php/20200930/main >> >> -- Found PHP-Version 8.0.21 (using /usr/bin/php-config) >> >> In Mapserver 8 these are missing and accordingly the output in >> mapscripts is: >> >> --* Mapscripts >> >> --* Python: disabled >> >> --* PHPNG: disabled >> >> That means PHP is not activated. In comparison the output with >> Mapserver 7.6.4: >> >> --* Mapscripts >> >> --* Python: disabled >> >> --* PHP: ENABLED >> >> --* PHPNG: disabled >> >> It is the same server with the same installation components. >> Accordingly, in a make and make under Version 8 install PHP Mapscript >> is not installed. >> >> php - v generates the following >> >> Unable to load dynamic library 'php_mapscript.so' (tried: >> /usr/lib/php/20200930/php_mapscript.so >> (/usr/lib/php/20200930/php_mapscript.so: cannot open shared object >> file: No such file or directory), >> /usr/lib/php/20200930/php_mapscript.so.so >> (/usr/lib/php/20200930/php_mapscript.so.so: cannot open shared object >> file: No such file or directory)) in Unknown on line 0 >> >> Note: PHP is installed with FPM module (php8.0-fpm) and instead of >> mpm_prefork mpm_event is used. >> >> >> Any idea? >> >> Thanks Sven >> From jason2017jay at gmail.com Thu Jul 21 10:09:23 2022 From: jason2017jay at gmail.com (Jeremy JK) Date: Thu, 21 Jul 2022 13:09:23 -0400 Subject: [mapserver-users] RedHat httpd configuration file Message-ID: Hello, Anyone has Mapserver installed on non debian distros? Like Fedora or RedHat Enterprise Linux? If so, feel free to share your apache/httpd configuration set up (Is it different from debian/ubuntu based distributions? I am not too sure) Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: From gatti.silvia at osmgp.gov.ar Thu Jul 21 10:48:26 2022 From: gatti.silvia at osmgp.gov.ar (Silvia Gatti - OSMGP.-) Date: Thu, 21 Jul 2022 14:48:26 -0300 Subject: [mapserver-users] Configuring mapserv with Oracle on Ubuntu 22.04 Message-ID: I am new for mapserv over Ubuntu 22.04. I had Oracle Client installed ok, because sqlplus is running I'm following instructions in https://mapserver.org/installation/unix.html?highlight=compiling+over+ubuntu#compiling-on-unix After fighting several weeks I'm at this point. And I've never got mapserv to compile for Oracle. I had also read https://gis.stackexchange.com/questions/328817/mapserver-with-oracle-spatial-on-linux I 'll apreciate any help |cmake -DCMAKE_INSTALL_PREFIX=/opt/mapserver \ -DCMAKE_PREFIX_PATH=/usr/local/pgsql/91:/usr/local:/opt:/usr/share:/usr/lib:/usr/lib/oracle/12.2/client64:/usr/include/oracle/12.2/client64:/usr/lib:/usr/lib64:/usr/share/gdal \ -DWITH_CLIENT_WFS=ON \ -DWITH_CLIENT_WMS=ON \ -DWITH_CURL=ON \ -DWITH_SOS=ON \ -DWITH_PHP=ON \ -DWITH_PERL=ON \ -DWITH_RUBY=ON \ -DWITH_JAVA=ON \ -DWITH_CSHARP=ON \ -DWITH_PYTHON=ON \ -DWITH_SVGCAIRO=OFF\ -DWITH_ORACLESPATIAL=ON \ -DWITH_MSSQL2008=ON \ -DWITH_PROTOBUFC=OFF \ -DWITH_HARFBUZZ=OFF \ -DWITH_FRIBIDI=OFF \ ../ >../configure.out.txt| -- Silvia Gatti Gestion del Cambio - Gcia. de Sistemas Obras Sanitarias S.E. Mar del Plata - Bat?n Tel. 4992900 Int 521 "Trabajando por un futuro con agua potable para todos" -------------- next part -------------- An HTML attachment was scrubbed... URL: From michael.smith.erdc at gmail.com Thu Jul 21 11:13:37 2022 From: michael.smith.erdc at gmail.com (Michael Smith) Date: Thu, 21 Jul 2022 14:13:37 -0400 Subject: [mapserver-users] Configuring mapserv with Oracle on Ubuntu 22.04 In-Reply-To: References: Message-ID: Silvia, You generally also need to set the ORACLE_HOME env value to your client location, eg export ORACLE_HOME=$PREFIX/instantclient. Also make sure you have libaio installed as that is needed as well. Mike -- Michael Smith US Army Corps of Engineers Remote Sensing/GIS Center From: MapServer-users on behalf of "Silvia Gatti - OSMGP.- via MapServer-users" Reply-To: "Silvia Gatti - OSMGP.-" Date: Thursday, July 21, 2022 at 1:48 PM To: Mapserver Mailing List Subject: [mapserver-users] Configuring mapserv with Oracle on Ubuntu 22.04 I am new for mapserv over Ubuntu 22.04. I had Oracle Client installed ok, because sqlplus is running I'm following instructions in https://mapserver.org/installation/unix.html?highlight=compiling+over+ubuntu#compiling-on-unix After fighting several weeks I'm at this point. And I've never got mapserv to compile for Oracle. I had also read https://gis.stackexchange.com/questions/328817/mapserver-with-oracle-spatial-on-linux I 'll apreciate any help cmake -DCMAKE_INSTALL_PREFIX=/opt/mapserver \ ??????? -DCMAKE_PREFIX_PATH=/usr/local/pgsql/91:/usr/local:/opt:/usr/share:/usr/lib:/usr/lib/oracle/12.2/client64:/usr/include/oracle/12.2/client64:/usr/lib:/usr/lib64:/usr/share/gdal \ ??????? -DWITH_CLIENT_WFS=ON \ ??????? -DWITH_CLIENT_WMS=ON \ ??????? -DWITH_CURL=ON \ ??????? -DWITH_SOS=ON \ ??????? -DWITH_PHP=ON \ ??????? -DWITH_PERL=ON \ ??????? -DWITH_RUBY=ON \ ??????? -DWITH_JAVA=ON \ ??????? -DWITH_CSHARP=ON \ ??????? -DWITH_PYTHON=ON \ ??????? -DWITH_SVGCAIRO=OFF\ ??????? -DWITH_ORACLESPATIAL=ON \ ??????? -DWITH_MSSQL2008=ON \ ? -DWITH_PROTOBUFC=OFF \ ? -DWITH_HARFBUZZ=OFF \ ? -DWITH_FRIBIDI=OFF \ ??????? ../ >../configure.out.txt -- Silvia Gatti Gestion del Cambio - Gcia. de Sistemas Obras Sanitarias S.E. Mar del Plata - Bat?n Tel. 4992900 Int 521 "Trabajando por un futuro con agua potable para todos" _______________________________________________ MapServer-users mailing list MapServer-users at lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/mapserver-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From elari.roop at gmail.com Fri Jul 22 00:12:25 2022 From: elari.roop at gmail.com (Elari Roop) Date: Fri, 22 Jul 2022 10:12:25 +0300 Subject: [mapserver-users] Mapserver vsis3 perfomance Message-ID: Hi all, I am rather new to mapserver and I am trying to read mosaic from S3, but I have run into perfomance issues. https://github.com/pedros007/mapserver-docker I folowed the instructions above, but it seems that increasing number of threads below does not have any impact on perfomance. > CONFIG "GDAL_NUM_THREADS" "50" Could it be that the mapserver is reading data with only one thread or could this be related to something else like overviews configuration, reading from tileindex shp file etc? Best regards, Elari -------------- next part -------------- An HTML attachment was scrubbed... URL: From schroeter at netgis.de Fri Jul 22 03:12:25 2022 From: schroeter at netgis.de (Sven Schroeter) Date: Fri, 22 Jul 2022 12:12:25 +0200 Subject: [mapserver-users] Mapserver 8, PHP 8 and Mapscript In-Reply-To: <736eb42d-6f5b-83a7-8e31-161b4ee49016@gatewaygeomatics.com> References: <0059d60f-13d3-48cc-12a2-5283de7243a1@netgis.de> <0d9543c2-2dfd-528b-f60c-d573df0b684f@gatewaygeomatics.com> <736eb42d-6f5b-83a7-8e31-161b4ee49016@gatewaygeomatics.com> Message-ID: <05cf40a0-c100-c4c4-dfe1-6edcb8019298@netgis.de> Hi Jeff, thanks, I have a problem when using -DWITH_PHPNG=ON \ Is that SWIG still expects PHP 7 and therefore errors occur during make [ 99%] Swig compile ../mapscript.i for php7 [ 99%] Built target php_mapscriptng_swig_compilation Scanning dependencies of target php_mapscriptng [ 99%] Building C object mapscript/phpng/CMakeFiles/php_mapscriptng.dir/CMakeFiles/php_mapscriptng.dir/mapscriptPHP7_wrap.c.o /root/mapserver-8.0.0-beta1/build/mapscript/phpng/CMakeFiles/php_mapscriptng.dir/mapscriptPHP7_wrap.c:755:3: error: #error These bindings need PHP7 - to generate PHP5 bindings use: SWIG < 4.0.0 and swig -php5 755 | # error These bindings need PHP7 - to generate PHP5 bindings use: SWIG < 4.0.0 and swig -php5 ... any idea? thanks Sven Am 21.07.2022 um 15:12 schrieb Jeff McKenna: > I should also add here, as you mention PHP 8: I did much effort > recently to upgrade the continuous build systems (TravisCI, GitHub > action) so that various PHP versions are now tested for PHPNG > MapScript, including PHP 8.1.x, and re-enabled PHPUnit tests that test > each MapScript object, every time a pull request or commit is made to > the project repository. (you can find those tests inside > /msautotest/php/ and follow the README there) > > More tests are warmly welcomed of course! :) > > Thanks, > > -jeff > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From richard.greenwood at gmail.com Fri Jul 22 15:10:24 2022 From: richard.greenwood at gmail.com (Richard Greenwood) Date: Fri, 22 Jul 2022 16:10:24 -0600 Subject: [mapserver-users] Mapserver vsis3 perfomance In-Reply-To: References: Message-ID: I have found that S3 has a little more latency than even the cheapest AWS EBS storage (SC1). I used Apache AB several years ago to test and didn't do an especially rigorous job with the testing so that might not be applicable in your case, and for that matter, that might not still be the case. Rich On Fri, Jul 22, 2022 at 1:12 AM Elari Roop wrote: > Hi all, > > I am rather new to mapserver and I am trying to read mosaic from S3, but I > have run into perfomance issues. > > https://github.com/pedros007/mapserver-docker > > > I folowed the instructions above, but it seems that increasing number of > threads below does not have any impact on perfomance. > >> CONFIG "GDAL_NUM_THREADS" "50" > > > Could it be that the mapserver is reading data with only one thread or > could this be related to something else like overviews configuration, > reading from tileindex shp file etc? > > Best regards, > Elari > _______________________________________________ > MapServer-users mailing list > MapServer-users at lists.osgeo.org > https://lists.osgeo.org/mailman/listinfo/mapserver-users > -- Richard W. Greenwood www.greenwoodmap.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From pschmitt at gmail.com Fri Jul 22 16:33:07 2022 From: pschmitt at gmail.com (Peter Schmitt) Date: Fri, 22 Jul 2022 17:33:07 -0600 Subject: [mapserver-users] Mapserver vsis3 perfomance In-Reply-To: References: Message-ID: Hi Elari, I'm the author of that repo. The format of the input raster data is critical to achieve optimal /vsis3/ performance. Much more so than multithreading/multiprocessing configuration. I have had the best performance serving raster data formatted as a Cloud Optimized GeoTIFF (COG). Newer versions of GDAL have a COG driver https://gdal.org/drivers/raster/cog.html . You can convert your raster data to a COG like so: > gdal_translate input.jp2 cog.tif -of COG A couple of GDAL config options can substantially improve Mapserver performance reading data from /vsicurl/ filesystems. Here are some settings you can put in your Mapserver mapfile: CONFIG "CPL_VSIL_CURL_ALLOWED_EXTENSIONS" "tif vrt gpkg zip shp shx dbf qix cpg prj" CONFIG "GDAL_DISABLE_READDIR_ON_OPEN" "YES" There are a lot of other GDAL config options to improve performance. Here is a good writeup that closely matches my experience serving imagery stored by a cloud computing provider like S3: https://developmentseed.org/titiler/advanced/performance_tuning/ Cheers, Pete On Fri, Jul 22, 2022 at 1:12 AM Elari Roop wrote: > Hi all, > > I am rather new to mapserver and I am trying to read mosaic from S3, but I > have run into perfomance issues. > > https://github.com/pedros007/mapserver-docker > > > I folowed the instructions above, but it seems that increasing number of > threads below does not have any impact on perfomance. > >> CONFIG "GDAL_NUM_THREADS" "50" > > > Could it be that the mapserver is reading data with only one thread or > could this be related to something else like overviews configuration, > reading from tileindex shp file etc? > > Best regards, > Elari > _______________________________________________ > MapServer-users mailing list > MapServer-users at lists.osgeo.org > https://lists.osgeo.org/mailman/listinfo/mapserver-users > -- Pete -------------- next part -------------- An HTML attachment was scrubbed... URL: From sethg at geographika.co.uk Tue Jul 26 07:43:11 2022 From: sethg at geographika.co.uk (Seth G) Date: Tue, 26 Jul 2022 16:43:11 +0200 Subject: [mapserver-users] [SURVEY] Publishing of Twin Cities, OSGeo Local Chapter Meeting Recordings In-Reply-To: <0EEA0B14-85C3-48C5-9C03-8EEFB6B2E9BA@ci.stpaul.mn.us> References: <0EEA0B14-85C3-48C5-9C03-8EEFB6B2E9BA@ci.stpaul.mn.us> Message-ID: Hi Bob, There is an OSGeo YouTube channel at https://www.youtube.com/channel/UCDvJEf8hXbyeVqaYaS8sLvw that could be used? I'd like to highlight a couple of the MapServer related talks at the MapServer summary talk next month at FOSS4G if possible. As you mention, the presentations linked to at https://www.osgeo.org/local-chapters/twin-cities-mn-usa-chapter/ are currently offline, so +1 from myself. Seth -- web:https://geographika.net twitter: @geographika On Wed, Jul 13, 2022, at 6:48 PM, Basques, Bob (CI-StPaul) wrote: > All, > > I?ve been publishing our past meeting recording links on my own, but the hardware it?s on is nearing end of life. It?s been down for a couple of weeks now, and I was pondering publishing our presentations to a You-Tube Channel. I think this will make things easier on the maint. and publishing, and also allow for a little better handling, of metadata aspects. This should also make it easier for everyone in our groups to direct people to our presentations in the past, present, and future to promote our efforts to date. I also have some old presentations that I did, saved from meetings way back in the day (When we were TCMUG) that I would like to park somewhere, probably as a retrospective. > > So, can you reply to this Email with a +1 if in favor or -1 if not. Go ahead and add any comments as well for reasoning. Even if it?s decided that it?s a good idea, I?ll still get an individual signoff from each presenter before posting anything. > > Bobb > > > > Get me in Teams > *PW19-S295-C024* > > > _______________________________________________ > MapServer-users mailing list > MapServer-users at lists.osgeo.org > https://lists.osgeo.org/mailman/listinfo/mapserver-users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bob.basques at ci.stpaul.mn.us Tue Jul 26 07:52:38 2022 From: bob.basques at ci.stpaul.mn.us (Basques, Bob (CI-StPaul)) Date: Tue, 26 Jul 2022 14:52:38 +0000 Subject: [mapserver-users] [SURVEY] Publishing of Twin Cities, OSGeo Local Chapter Meeting Recordings In-Reply-To: References: <0EEA0B14-85C3-48C5-9C03-8EEFB6B2E9BA@ci.stpaul.mn.us> Message-ID: Hi Seth, I did find that OSGeo Channel, but didn?t think it was right to mix things without asking. Also, I?m not 100% on whether they should be mixed or not, unless some sort of naming scheme can be arrived at for filtering for either group. I would assume that over time, others might want to also add in for example. I?m willing to learn/figure out the YouTube stuff (never done it before), which is a desire of my own, but I?m open to other approaches. I have some other legacy stuff stashed away from older local meetings too, as I?m sure others do in our group. Not sure this historical stuff would be of interest to everyone. I was also planning on putting a little editing effort into setting up title cards for the uploads as well, normal youTube stuff . . . Bobb My machine - - - PW19-S295-C024 From: Seth G Sent: Tuesday, July 26, 2022 9:43 AM To: Basques, Bob (CI-StPaul) ; tcmug at lists.osgeo.org; geomoose-users-osgeo ; MapServer Users Subject: Re: [mapserver-users] [SURVEY] Publishing of Twin Cities, OSGeo Local Chapter Meeting Recordings Think Before You Click: This email originated outside our organization. Hi Bob, There is an OSGeo YouTube channel at https://www.youtube.com/channel/UCDvJEf8hXbyeVqaYaS8sLvw that could be used? I'd like to highlight a couple of the MapServer related talks at the MapServer summary talk next month at FOSS4G if possible. As you mention, the presentations linked to at https://www.osgeo.org/local-chapters/twin-cities-mn-usa-chapter/ are currently offline, so +1 from myself. Seth -- web:https://geographika.net twitter: @geographika On Wed, Jul 13, 2022, at 6:48 PM, Basques, Bob (CI-StPaul) wrote: All, I?ve been publishing our past meeting recording links on my own, but the hardware it?s on is nearing end of life. It?s been down for a couple of weeks now, and I was pondering publishing our presentations to a You-Tube Channel. I think this will make things easier on the maint. and publishing, and also allow for a little better handling, of metadata aspects. This should also make it easier for everyone in our groups to direct people to our presentations in the past, present, and future to promote our efforts to date. I also have some old presentations that I did, saved from meetings way back in the day (When we were TCMUG) that I would like to park somewhere, probably as a retrospective. So, can you reply to this Email with a +1 if in favor or -1 if not. Go ahead and add any comments as well for reasoning. Even if it?s decided that it?s a good idea, I?ll still get an individual signoff from each presenter before posting anything. Bobb Get me in Teams PW19-S295-C024 _______________________________________________ MapServer-users mailing list MapServer-users at lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/mapserver-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From lars.fricke at skendata.de Wed Jul 27 06:27:27 2022 From: lars.fricke at skendata.de (Lars Fricke) Date: Wed, 27 Jul 2022 15:27:27 +0200 Subject: [mapserver-users] using dynamic spacial filter in url Message-ID: An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: OpenPGP_0x667E0B7B73E250FB.asc Type: application/pgp-keys Size: 2460 bytes Desc: OpenPGP public key URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: OpenPGP_signature Type: application/pgp-signature Size: 665 bytes Desc: OpenPGP digital signature URL: