[VisCom] OSGeo Presentation Template - Draft - Review and Comment by Tues 6/6

[Peter Moran]

Sorry, forgot to save.  Please see proper file attached.

-----Original Message-----
From: Peter Moran 
Sent: Tuesday, June 06, 2006 4:31 PM
To: 'dev at visibilitycommittee.osgeo.org'; Pericles S. Nacionales
Subject: FW: [VisCom] OSGeo Presentation Template - Draft - Review and
Comment by Tues 6/6

Perry, Tyler, mpg,

Thanks for comments on presentation template guys.  I saved as .odg as
requested.

>Have you also checked if there is a Where 2.0 speaker template
available?  

I looked to no avail.  I think there's more value in creating a
longer-lasting OSGeo template anyhow.

I agree, the black is cool, but intended for ad and banners and high
impact communications.  Also, printing with it burns up toner in a big
way, and things like inserting screenshots and creating diagrams gets
pretty funky.  So I stuck with the white background.

mpg - I addressed your comments as best I could below.

I can't spare any more time on this right now.  If someone wants to pick
it up and polish it up, that's fine by me.  Otherwise, let's declare it
done and get it out to the presenters.

Peter

-----Original Message-----
From: Tyler Mitchell (External) 
Sent: Saturday, June 03, 2006 9:02 PM
To: dev at visibilitycommittee.osgeo.org
Cc: board at board.osgeo.org
Subject: Re: [VisCom] OSGeo Presentation Template - Draft - Review and
Comment by Tues 6/6

I think this looks good Peter - Michael's comments make sense to me too.

Have you also checked if there is a Where 2.0 speaker template
available?  
Last year I took their recommended opening slide and then did some
colour 
coordinating with it so the rest of my slides fit their conference
colours.  
Might be worth at least checking out.

I'm not a fan of having the high contrast white on black look and feel
like in 
the ads.   My view is that the ads are more for impact than
communication and 
that white on black will be tough to look professional in a presentation

slide environment.  It is also a printing nightmare and since we hope to
have 
this template re-used, we should keep that in mind.

Tyler

-----Original Message-----
From: Michael P. Gerlek [mailto:mpg at lizardtech.com] 
Sent: Thursday, June 01, 2006 5:43 PM
To: dev at visibilitycommittee.osgeo.org
Subject: RE: [VisCom] OSGeo Presentation Template - Draft - Review and
Comment by Tues 6/6

Peter:

Cool, I'm moving some slides into it now to see how it will look.  A few
things I'd like to see:

- Can we get the logo on the title master page?  (not the background
compass, just the regular logo)  It is on your slide, but not in the
template itself.

<Peter>  Please see comment below about using the logo sparingly.

- There is a "(c) 2005 Autodesk" tag on the slide master page?  (almost
hidden, lower right)

<Peter> Removed.

- I think the "section" page should have a logo on it, like the title
and end pages.

<Peter> I disagree and figure the logo is more powerful if it is used
sparingly.  On the first and last slides in this case.

- Can the "end" and "section" slides be put into the "template" itself,
like the "title" and "slide" pages?

<Peter> No, because that makes them look like every other slide.

-mpg
 

> -----Original Message-----
> From: Peter Moran [mailto:peter.moran at autodesk.com] 
> Sent: Thursday, June 01, 2006 5:24 PM
> To: dev at visibilitycommittee.osgeo.org
> Cc: board at board.osgeo.org
> Subject: [VisCom] OSGeo Presentation Template - Draft - 
> Review and Comment by Tues 6/6
> 
> VisCom Team,
> 
> Attached is draft presentation template, in ppt and open 
> office formats.
> It uses a shade of green from logo, and the grey tone of the large
> compass from the template for the flyers that Tyler is working on.
> 
> Please review and comment by Tuesday June 6.
> 
> Cheers,
> 
> Peter
> 
> -----Original Message-----
> From: Markus Neteler [mailto:neteler.osgeo at gmail.com] 
> Sent: Thursday, June 01, 2006 2:28 PM
> To: dev at visibilitycommittee.osgeo.org
> Cc: board at board.osgeo.org
> Subject: [VisCom] Re: [OSGeo-Board] RE: [VisCom] Face-to-Face agenda?
> 
> Dear VisCom,
> 
> ... once existing, please make it an OpenDocument format template
> before publishing.
> 
> thanks
>  Markus
> 
> On 6/1/06, Peter Moran <peter.moran at autodesk.com> wrote:
> > I will take first crack at ppt template and circulate something to
> > VisCom for review by tomorrow.
> >
> > Peter
> >
> > -----Original Message-----
> > From: Michael P. Gerlek [mailto:mpg at lizardtech.com]
> > Sent: Thursday, June 01, 2006 2:10 PM
> > To: board at board.osgeo.org; dev at visibilitycommittee.osgeo.org
> > Subject: [VisCom] Face-to-Face agenda?
> >
> > I was just looking over the Wiki page for the San Rafael meeting.
> Some
> > comments:
> >
> > * Will there be a "pre-meeting" to formalize the agenda and such?
> >
> > * I see that there are a few WebCom items lists, but no WebCom
> > attendees..?
> >
> > * I'd like to see some discussion of the special-interest-group and
> > local-interest-group concepts, to understand how they fit into the
> > scheme of things, relative to our other "project" groups.
> >
> > * Should we discuss when/if the next round of member & board
> elections?
> >
> > * It has been suggested (Dave and Chris) that we take some time to
> > harmonize slide templates for Where talks.
> >
> > -mpg
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe at visibilitycommittee.osgeo.org
> For additional commands, e-mail: 
> dev-help at visibilitycommittee.osgeo.org
> 
> 
> 

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe at visibilitycommittee.osgeo.org
For additional commands, e-mail: dev-help at visibilitycommittee.osgeo.org


-------------- next part --------------
A non-text attachment was scrubbed...
Name: OSGeoPresentationTemplate.odg
Type: application/octet-stream
Size: 116030 bytes
Desc: OSGeoPresentationTemplate.odg
Url : http://lists.osgeo.org/pipermail/marketing/attachments/20060606/00d1655b/OSGeoPresentationTemplate.obj