[Marketing] Seal production

[Anita Graser]

Hi all,

I found a local shop which should be able to make one quickly. I think I'll
opt for a model which is designed for travel (
www.google.at/search?q=Trodat+Mobile+Printy) rather than a fancy old-style
one which needs separate ink containers.

Best wishes,
Anita


On Thu, Jul 7, 2016 at 1:50 PM, Marc Vloemans <marcvloemans1 at gmail.com>
wrote:

> Hi Anita,
>
> I do not have one lined up or so.
>
> Vriendelijke groet,
> Marc Vloemans
>
>
> Op 7 jul. 2016 om 12:25 heeft Anita Graser <anitagraser at gmx.at> het
> volgende geschreven:
>
> Thank you Marc! If you already know a good shop to order one, that would
> be great because it would save me time to look for one.
>
> Best wishes
> Anita
> On Jul 7, 2016 12:14, "Marc Vloemans" <marcvloemans1 at gmail.com> wrote:
>
>> Anita,
>>
>> I honestly do not believe it is a matter of 'bothered'. In my case it
>> happened to be a discussion/conversation which I fell into midway. I left
>> it to the original participants as I did not feel I had to contribute
>> anything.
>>
>> The competition for a seal was new to me.  And the intended usage of the
>> seal therefor still remains a mystery. Venka's remark only makes sense
>> to me if the seal has an official status in terms of legally binding
>> contracts.
>>
>> I would not read too much into it. If you need help ordering locally
>> please feel free to reach out for help.
>>
>> Vriendelijke groet,
>> Marc Vloemans
>>
>>
>> Op 7 jul. 2016 om 12:02 heeft Anita Graser <anitagraser at gmx.at> het
>> volgende geschreven:
>>
>> Ok. I'll get a rubber one, since nobody bothered to answer my question
>> about venka's concerns.
>>
>> Anita
>>
>> On Jul 6, 2016 23:39, "Marc Vloemans" <marcvloemans1 at gmail.com> wrote:
>>
>>> Anita et al,
>>>
>>> I agree with Jody: this thread is costing more time than the actual
>>> purchase.
>>>
>>> How many do you need ?
>>>
>>> If one or two, please, order one locally and get reimbursement from
>>> Michael Smith. With  cost indication as Jody provided.
>>>
>>> If more needed, what is the purpose? Official present or other ?
>>>
>>> Vriendelijke groet,
>>> Marc Vloemans
>>>
>>>
>>> Op 6 jul. 2016 om 22:38 heeft Jody Garnett <jody.garnett at gmail.com> het
>>> volgende geschreven:
>>>
>>> Searching online show that that rubber seals cost $10-$30 (you can use
>>> an image for the design). I did not have too much luck looking for personal
>>> seals: http://www.thestampmaker.com/embossers.aspx not sure if this is
>>> what we want? $20-50 for an "embosser" ...
>>>
>>> So we are having a high email / cost ratio on this one.
>>>
>>> Marc can we make a motion or otherwise accept Anita's offer to get this
>>> done?
>>>
>>> --
>>> Jody Garnett
>>>
>>> On 1 July 2016 at 12:49, Anita Graser <anitagraser at gmx.at> wrote:
>>>
>>>>
>>>>
>>>> On Fri, Jul 1, 2016 at 9:33 PM, Jody Garnett <jody.garnett at gmail.com>
>>>> wrote:
>>>>
>>>>> Not sure of a good answer here, think we need to find out who can
>>>>> produce seals look at the cost difference between wood/rubber/metal and see
>>>>> if there is still time to source a seal before foss4g. It would be nice to
>>>>> present the seal to our president in the AGM for example.
>>>>>
>>>>> I would recommend reaching out to Helena and/or Micheal for actual
>>>>> purchase (since Micheal could pay the provider directly). Or if it is not
>>>>> very much someone could purchase and then be reimbursed. Or if there is not
>>>>> much time perhaps source it in Germany?
>>>>>
>>>>
>>>> ​Is rubber still an option for us if - as Venka noted - rubber seals
>>>> are not accepted as "official" in some countries?
>>>>
>>>> Will the marketing committee reach out to Helene/Michael or should I go
>>>> ahead in order to hopefully get it done by August?
>>>>
>>>> Best wishes,
>>>> Anita
>>>>
>>>>
>>>>
>>>> ​
>>>>
>>>>
>>>>
>>>>
>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osgeo.org/pipermail/marketing/attachments/20160712/a16e25e8/attachment.html>