[Portugal] duvidas sobre openlayers
Pedro Costa
pedrocostaarma sapo.pt
Quarta-Feira, 14 de Dezembro de 2011 - 18:02:46 EST
Obrigado Hugo.Realmente tem sido um bocado duro para mim uma vez que
tenho muito poucas bases a nivel de javascript e html, e por isso demoro
muito em coisas dificeis.
Apesar de estudar ainda estou à espera do livro que comprei...
De qualquer maneira não posso desistir...
POr isso obrigado a todos que têm ajudado.
ABraço
On 13-12-2011 18:11, Hugo wrote:
> Olá Pedro,
>
> Quem espera sempre alcança... neste caso Quem bate com a cabeça mais
> tarde ou mais cedo resolve...
> A entrada pode ser um pouco dolorosa mas não desistas, pois, o
> OpenLayers é de facto uma biblioteca espectacular que te permitirá
> desenvolveres coisas fantásticas à tua medida... E o conhecimento vai
> ficando. Isso é o mais importante.
>
> Boa sorte e um abc,
> Hugo
>
> 2011/12/13 Pedro Costa <pedrocostaarma sapo.pt
> <mailto:pedrocostaarma sapo.pt>>
>
> Resolvido finalmente...Tive de mudar nessa parte e acertar com a
> ordem.
>
>
>
> PS:Só é pena ter demorado tanto para uma coisa tão simples lol!
>
>
>
>
> On 13-12-2011 15:34, Hugo wrote:
>> Se calhar o teu problema são as coordenadas que estás a passar
>> para o OpenaLayers.Bounds.
>> Confirma que tens as coordenadas certas (por exemplo através do
>> QGis ou do PostGIS)
>>
>> Abc,
>> Hugo
>>
>> 2011/12/13 Pedro Costa <pedrocostaarma sapo.pt
>> <mailto:pedrocostaarma sapo.pt>>
>>
>>
>>
>> Bem agora começa a fazer sentido, tenho de mudar nesta parte:
>>
>> // set default position
>> map.zoomToExtent(new
>> OpenLayers.Bounds(5062994.9488977,
>>
>> -932033.61453498,
>>
>> -916746.20888068,
>>
>> 5071594.1145783));
>>
>>
>> Aqui já muda para uma área 'com alguma coisa'...
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> On 13-12-2011 15:20, Pedro Costa wrote:
>>>
>>> HUgo nesta parte do código:
>>>
>>> // set default position
>>> map.zoomToExtent(new OpenLayers.Bounds(880000,
>>> 6840000,
>>> 915000,
>>>
>>> 6860000));
>>>
>>> Também tenho de inserir os valores respectivos certo?
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> On 13-12-2011 15:01, Hugo wrote:
>>>> Olá Pedro,
>>>>
>>>> tens que fazer um map.setCenter();
>>>>
>>>> Abc,
>>>> Hugo
>>>>
>>>> 2011/12/13 Pedro Costa <pedrocostaarma sapo.pt
>>>> <mailto:pedrocostaarma sapo.pt>>
>>>>
>>>> Não entendo porque inseri os bounds da area que
>>>> pretendo e ele abre com uma area completamente
>>>> diferente...
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On 13-12-2011 12:57, Hugo wrote:
>>>>> Aqui vai.
>>>>> um abc,
>>>>>
>>>>> Hugo
>>>>>
>>>>>
>>>>> map.events.register('zoomend', map, function(){
>>>>> var mapProj = map.getProjection();
>>>>> var mapZoom = map.getZoom();
>>>>> var mapRes = map.getResolutionForZoom(mapZoom);
>>>>> if (mapProj == 'EPSG:900913' && mapRes > 306){
>>>>> map.zoomToScale(866688.0326989387, true);
>>>>> }
>>>>> });
>>>>>
>>>>> 2011/12/13 Pedro Costa <pedrocostaarma sapo.pt
>>>>> <mailto:pedrocostaarma sapo.pt>>
>>>>>
>>>>> Conheces algum exemplo do evento zoomend para
>>>>> eu tentar guiar-me?
>>>>>
>>>>> Obrigado
>>>>>
>>>>> Em 13-12-2011 12:45, Hugo escreveu:
>>>>>> Experimenta adicionar o seguinte às opções do teu
>>>>>> mapa:
>>>>>>
>>>>>> restrictedExtent: new OpenLayers.Bounds(.....);
>>>>>>
>>>>>>
>>>>>> De qualquer maneira, qd usas layers comerciais
>>>>>> (google, yahoo, etc), tens que definir tb nas
>>>>>> layers algumas restrições nomeadamente as
>>>>>> resoluções máximas, etc...
>>>>>>
>>>>>> Ou seja, o facto de definires o restricted extent
>>>>>> não vai impedir de veres o mundo inteiro. Então
>>>>>> podes fazer como te disse, ou ainda, podes
>>>>>> adicionar um evento ao map on zoomend e detectas
>>>>>> qual a resolução e se for maior que aquela que tu
>>>>>> queres permitir entao fazes um zoom ao mapa...
>>>>>> desta forma consegues eliminar a visualização do
>>>>>> mundo inteiro.
>>>>>>
>>>>>> Abc,
>>>>>>
>>>>>> Hugo
>>>>>>
>>>>>> 2011/12/13 Pedro Costa <pedrocostaarma sapo.pt
>>>>>> <mailto:pedrocostaarma sapo.pt>>
>>>>>>
>>>>>> Obrigado Hugo.
>>>>>> Eu estou a tentar que o exemplo do link abra
>>>>>> na área que pretendo mas está dificil.
>>>>>>
>>>>>> http://www.pgrouting.org/docs/ol-workshop/ch05.html
>>>>>>
>>>>>> Por exemplo, abri o exemplo original fiz zoom
>>>>>> na área que pretendo e com o firebug fiz
>>>>>> map.getExtent(). Assim obtive os valores da
>>>>>> bounding box que queria penso eu:
>>>>>>
>>>>>> bottom
>>>>>> 5066053.4452291
>>>>>> left
>>>>>> -929102.37877511
>>>>>> right
>>>>>> -921458.67594797
>>>>>> top
>>>>>> 5070353.0280693
>>>>>>
>>>>>> A seguir inseri na variavel options coloquei
>>>>>> estes valores mas mesmo assim não, abre na
>>>>>> área que queria.
>>>>>>
>>>>>> Alguém tem ideia porquê?
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 13-12-2011 12:16, Pedro Costa wrote:
>>>>>>> Pessoal podem ajudar-me no seguinte:
>>>>>>> Tenho esta parte do código:
>>>>>>>
>>>>>>>
>>>>>>> var options = {
>>>>>>>
>>>>>>> projection: new OpenLayers.Projection("EPSG:900913"),
>>>>>>>
>>>>>>> units: "m",
>>>>>>>
>>>>>>> numZoomLevels: 22,
>>>>>>>
>>>>>>> maxResolution: 156543.0339,
>>>>>>>
>>>>>>> maxExtent: new OpenLayers.Bounds(-20037508, -20037508,
>>>>>>>
>>>>>>> 20037508, 20037508.34)
>>>>>>>
>>>>>>> };
>>>>>>>
>>>>>>> retirado de:
>>>>>>> http://www.pgrouting.org/docs/ol-workshop/ch05.html
>>>>>>>
>>>>>>>
>>>>>>> Significa que o mapa vai estar na projecção
>>>>>>> 900913. Neste exempo eu quero mudar a area a
>>>>>>> ser apresentada por isso tenho de mudar o
>>>>>>> maxExtend certo?
>>>>>>> A questão é se eu no geoserver definir o srs
>>>>>>> como 900913 e calcular, tenho os valores da
>>>>>>> bounding box,e é so substituir ou estou errado?
>>>>>>>
>>>>>>> Pelo que percebi:
>>>>>>>
>>>>>>> -20037508
>>>>>>> (left = min X)
>>>>>>>
>>>>>>>
>>>>>>> -20037508
>>>>>>> (bottom = min y)
>>>>>>>
>>>>>>> 20037508
>>>>>>>
>>>>>>> (right = max X)
>>>>>>>
>>>>>>> 20037508.34
>>>>>>>
>>>>>>> (top = max y)
>>>>>>>
>>>>>>>
>>>>>>> Estou correcto?
>>>>>>>
>>>>>>> obrigado
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 13-12-2011 11:11, Jorge de Jesus wrote:
>>>>>>>>
>>>>>>>> Oi
>>>>>>>>
>>>>>>>> Pelo que vejo:
>>>>>>>>
>>>>>>>> 1) Nao tens a proxy instalada para poderes
>>>>>>>> contactar http://localhost:8080
>>>>>>>>
>>>>>>>> http://trac.osgeo.org/openlayers/wiki/FrequentlyAskedQuestions#HowdoIsetupaProxyHost
>>>>>>>>
>>>>>>>> Ate teres a proxy instalada o browser nao
>>>>>>>> vai pedir nada ao servidor...
>>>>>>>>
>>>>>>>> 2) Tens duas vezes projection:
>>>>>>>> projection: 'map.getProjectionObject()',
>>>>>>>> reproject: 'True',
>>>>>>>> projection: new OpenLayers.Projection('4326'),
>>>>>>>>
>>>>>>>> Geralmente JS usa o ultimo valor definido,
>>>>>>>> portanto estas a usar projeccao 4325
>>>>>>>>
>>>>>>>> 3) O uso correct the OpenLayers.Projection
>>>>>>>> e' com EPSG
>>>>>>>>
>>>>>>>> OpenLayers.Projection("EPSG:4326")
>>>>>>>>
>>>>>>>> All the best
>>>>>>>>
>>>>>>>> Jorge
>>>>>>>>
>>>>>>>>
>>>>>>>> On 13/12/11 10:50, Pedro Costa wrote:
>>>>>>>>> Acho que o problema é mesmo os wms que não
>>>>>>>>> são reprojectados:
>>>>>>>>> Reparem neste exemplo que fiz:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> http://pastebin.com/6i9TEWsH
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Simplesmente não aparece o wms
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 12-12-2011 09:38, Jorge de Jesus wrote:
>>>>>>>>>>
>>>>>>>>>> Bons dias
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Bem, se tens acerteza que o wms funciona
>>>>>>>>>> sem problemas sem o layer proprietario,
>>>>>>>>>> o mais provavel e' que o WMS nao supporta
>>>>>>>>>> EPSG:900913 ou gera um erro quando fazes
>>>>>>>>>> o pedido.
>>>>>>>>>>
>>>>>>>>>> No firebug, ve os pedidos feitos pela
>>>>>>>>>> pagina (Seccao Net) e ve o pedido feito
>>>>>>>>>> ao servidor e a resposta data.
>>>>>>>>>>
>>>>>>>>>> Por exemplo tenho um sistema que faz o
>>>>>>>>>> seguinte pedido:
>>>>>>>>>>
>>>>>>>>>> http://localhost/rasdaman/wms.py?LAYERS=rasdamanImage&FORMAT=image%2Fpng&TIME=2011-06-20&STRATEGIES=%5Bobject%20Object%5D&TRANSPARENT=TRUE&SERVICE=WMS&VERSION=1.1.1&REQUEST=GetMap&STYLES=&SRS=EPSG%3A900913&BBOX=-6300637.7833253,4684889.401321,6076045.8348875,10359574.380423&WIDTH=1265&HEIGHT=580
>>>>>>>>>> <http://localhost/rasdaman/wms.py?LAYERS=rasdamanImage&FORMAT=image%2Fpng&TIME=2011-06-20&STRATEGIES=%5Bobject%20Object%5D&TRANSPARENT=TRUE&SERVICE=WMS&VERSION=1.1.1&REQUEST=GetMap&STYLES=&SRS=EPSG%3A900913&BBOX=-6300637.7833253,4684889.401321,6076045.8348875,10359574.380423&WIDTH=1265&HEIGHT=580>
>>>>>>>>>>
>>>>>>>>>> Experimenta a fazer um pedido ao teu WMS
>>>>>>>>>> usando SRS=EPSG%3A900913
>>>>>>>>>>
>>>>>>>>>> Jorge
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On 10/12/11 15:25, Pedro Costa wrote:
>>>>>>>>>>> Jorge,
>>>>>>>>>>>
>>>>>>>>>>> Sim lembro-me.Esclarece-me só a seguinte
>>>>>>>>>>> dúvida, o que é que o browser não está a
>>>>>>>>>>> conseguir ir buscar na tua opinião mais
>>>>>>>>>>> precisamente? É que ele vai buscar o
>>>>>>>>>>> layer proprietário, os wms é que não.
>>>>>>>>>>> Mas noutros exercicios que efectuei sem
>>>>>>>>>>> o layer proprietario ele ia buscar tudo.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Obrigado
>>>>>>>>>>> bom fim de semana
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On 10-12-2011 09:26, Jorge Mendes de
>>>>>>>>>>> Jesus wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> Oi
>>>>>>>>>>>>
>>>>>>>>>>>> Parece tudo em ordem, mas tens um
>>>>>>>>>>>> ligeiro problema :)
>>>>>>>>>>>>
>>>>>>>>>>>> Lembras-te da explicacao relativa a
>>>>>>>>>>>> cross-domain, ou seja podes acecer a
>>>>>>>>>>>> outros URLs partir de Javascript ?!
>>>>>>>>>>>> Pois quando tens um url com uma porta
>>>>>>>>>>>> diferente tens a mesma situacao, ou seja:
>>>>>>>>>>>>
>>>>>>>>>>>> http://localhost:8080
>>>>>>>>>>>>
>>>>>>>>>>>> è um URL differente e tens de usar uma
>>>>>>>>>>>> proxy para buscar os resultados. Eu
>>>>>>>>>>>> sempre pensei que mesmo com uma porta
>>>>>>>>>>>> difererente nao haveria problemas mas à
>>>>>>>>>>>> alguns meses algume teve o mesmo
>>>>>>>>>>>> problema e foi tudo explicado no
>>>>>>>>>>>> mailing list, acho que podes procurar
>>>>>>>>>>>> no google pelos emails mais antigos.
>>>>>>>>>>>>
>>>>>>>>>>>> Alem disso, tens o WMS a funcionar a
>>>>>>>>>>>> 100%? Experimentaste a fazer uma pedido
>>>>>>>>>>>> com EPSG:900913 ??
>>>>>>>>>>>>
>>>>>>>>>>>> Jorge
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>> From: portugal-bounces lists.osgeo.org
>>>>>>>>>>>> <mailto:portugal-bounces lists.osgeo.org>
>>>>>>>>>>>> on behalf of Pedro Costa
>>>>>>>>>>>> Sent: Fri 09/12/2011 13:47
>>>>>>>>>>>> To: portugal lists.osgeo.org
>>>>>>>>>>>> <mailto:portugal lists.osgeo.org>
>>>>>>>>>>>> Subject: Re: [Portugal] duvidas sobre
>>>>>>>>>>>> openlayers
>>>>>>>>>>>>
>>>>>>>>>>>> On 09-12-2011 09:22, Jorge de Jesus wrote:
>>>>>>>>>>>> > No meu caso nao defino a projeccao da
>>>>>>>>>>>> camada WMS e o OpenLayers usa a
>>>>>>>>>>>> > projeccao da baseLayer da google para
>>>>>>>>>>>> tudo, o meu WMS tem suporte
>>>>>>>>>>>> > nativo para 900913. Acho que devia
>>>>>>>>>>>> ter tido mais atencao ao codigo e
>>>>>>>>>>>> > seria mais correcto adicionar a
>>>>>>>>>>>> informacao da projeccao
>>>>>>>>>>>> >
>>>>>>>>>>>> > projection: map.getProjectionObject()
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Tentei assim:
>>>>>>>>>>>>
>>>>>>>>>>>> http://pastebin.com/WLkRVbxu
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Mas continuo sem sucesso, só é visivel
>>>>>>>>>>>> o layer proprietário. Nem sequer
>>>>>>>>>>>> aparece o "+" do layer switcher, não
>>>>>>>>>>>> percebo o porquê...
>>>>>>>>>>>>
>>>>>>>>>>>> Alguma sugestão?
>>>>>>>>>>>>
>>>>>>>>>>>> Obrigado
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> PS: O firebug tb não detecta nenhum erro.
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> Portugal mailing list
>>>>>>>>>>>> Portugal lists.osgeo.org
>>>>>>>>>>>> <mailto:Portugal lists.osgeo.org>
>>>>>>>>>>>> http://lists.osgeo.org/mailman/listinfo/portugal
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> Portugal mailing list
>>>>>>>>>>>> Portugal lists.osgeo.org <mailto:Portugal lists.osgeo.org>
>>>>>>>>>>>> http://lists.osgeo.org/mailman/listinfo/portugal
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> Portugal mailing list
>>>>>>>>>>> Portugal lists.osgeo.org <mailto:Portugal lists.osgeo.org>
>>>>>>>>>>> http://lists.osgeo.org/mailman/listinfo/portugal
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> PGP public key: 0x595FF9D3
>>>>>>>>>>
>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>
>>>>>>>>>> Plymouth Marine Laboratory
>>>>>>>>>> Registered Office:
>>>>>>>>>> Prospect Place
>>>>>>>>>> The Hoe
>>>>>>>>>> Plymouth PL1 3DH
>>>>>>>>>>
>>>>>>>>>> Website: www.pml.ac.uk
>>>>>>>>>> <http://www.pml.ac.uk>
>>>>>>>>>> Click here for PML Annual Review
>>>>>>>>>> <http://www.pml.ac.uk/pdf/PMLAR2010.pdf>
>>>>>>>>>> Registered Charity No. 1091222
>>>>>>>>>> PML is a company limited by guarantee
>>>>>>>>>> registered in England & Wales
>>>>>>>>>> company number 4178503
>>>>>>>>>>
>>>>>>>>>> Please think before you print.
>>>>>>>>>>
>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>
>>>>>>>>>> This e-mail, its content and any file
>>>>>>>>>> attachments are confidential.
>>>>>>>>>>
>>>>>>>>>> If you have received this e-mail in error
>>>>>>>>>> please do not copy, disclose it to any
>>>>>>>>>> third party or use the contents or
>>>>>>>>>> attachments in any way. Please notify the
>>>>>>>>>> sender by replying to this e-mail or
>>>>>>>>>> e-mail forinfo pml.ac.uk
>>>>>>>>>> <mailto:forinfo pml.ac.uk> and then
>>>>>>>>>> delete the email without making any
>>>>>>>>>> copies or using it in any other way.
>>>>>>>>>>
>>>>>>>>>> The content of this message may contain
>>>>>>>>>> personal views which are not the views of
>>>>>>>>>> Plymouth Marine Laboratory unless
>>>>>>>>>> specifically stated.
>>>>>>>>>>
>>>>>>>>>> You are reminded that e-mail
>>>>>>>>>> communications are not secure and may
>>>>>>>>>> contain viruses. Plymouth Marine
>>>>>>>>>> Laboratory accepts no liability for any
>>>>>>>>>> loss or damage which may be caused by
>>>>>>>>>> viruses.
>>>>>>>>>>
>>>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> Portugal mailing list
>>>>>>>>>> Portugal lists.osgeo.org <mailto:Portugal lists.osgeo.org>
>>>>>>>>>> http://lists.osgeo.org/mailman/listinfo/portugal
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Portugal mailing list
>>>>>>>>> Portugal lists.osgeo.org <mailto:Portugal lists.osgeo.org>
>>>>>>>>> http://lists.osgeo.org/mailman/listinfo/portugal
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> PGP public key: 0x595FF9D3
>>>>>>>>
>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>
>>>>>>>> Plymouth Marine Laboratory
>>>>>>>> Registered Office:
>>>>>>>> Prospect Place
>>>>>>>> The Hoe
>>>>>>>> Plymouth PL1 3DH
>>>>>>>>
>>>>>>>> Website: www.pml.ac.uk <http://www.pml.ac.uk>
>>>>>>>> Click here for PML Annual Review
>>>>>>>> <http://www.pml.ac.uk/pdf/PMLAR2010.pdf>
>>>>>>>> Registered Charity No. 1091222
>>>>>>>> PML is a company limited by guarantee
>>>>>>>> registered in England & Wales
>>>>>>>> company number 4178503
>>>>>>>>
>>>>>>>> Please think before you print.
>>>>>>>>
>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>
>>>>>>>> This e-mail, its content and any file
>>>>>>>> attachments are confidential.
>>>>>>>>
>>>>>>>> If you have received this e-mail in error
>>>>>>>> please do not copy, disclose it to any
>>>>>>>> third party or use the contents or
>>>>>>>> attachments in any way. Please notify the
>>>>>>>> sender by replying to this e-mail or e-mail
>>>>>>>> forinfo pml.ac.uk
>>>>>>>> <mailto:forinfo pml.ac.uk> and then delete
>>>>>>>> the email without making any copies or
>>>>>>>> using it in any other way.
>>>>>>>>
>>>>>>>> The content of this message may contain
>>>>>>>> personal views which are not the views of
>>>>>>>> Plymouth Marine Laboratory unless
>>>>>>>> specifically stated.
>>>>>>>>
>>>>>>>> You are reminded that e-mail communications
>>>>>>>> are not secure and may contain viruses.
>>>>>>>> Plymouth Marine Laboratory accepts no
>>>>>>>> liability for any loss or damage which may
>>>>>>>> be caused by viruses.
>>>>>>>>
>>>>>>>> ------------------------------------------------------------------------
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Portugal mailing list
>>>>>>>> Portugal lists.osgeo.org <mailto:Portugal lists.osgeo.org>
>>>>>>>> http://lists.osgeo.org/mailman/listinfo/portugal
>>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Portugal mailing list
>>>>>> Portugal lists.osgeo.org
>>>>>> <mailto:Portugal lists.osgeo.org>
>>>>>> http://lists.osgeo.org/mailman/listinfo/portugal
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Hugo Martins
>>>>>> LabNT - ISEGI UNL
>>>>>> Campus de Campolide
>>>>>> 1070-312 Lisboa
>>>>>> N 38°43'56.84", W 9°9'35.74"
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Portugal mailing list
>>>>>> Portugal lists.osgeo.org <mailto:Portugal lists.osgeo.org>
>>>>>> http://lists.osgeo.org/mailman/listinfo/portugal
>>>>>
>>>>> _______________________________________________
>>>>> Portugal mailing list
>>>>> Portugal lists.osgeo.org
>>>>> <mailto:Portugal lists.osgeo.org>
>>>>> http://lists.osgeo.org/mailman/listinfo/portugal
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Hugo Martins
>>>>> LabNT - ISEGI UNL
>>>>> Campus de Campolide
>>>>> 1070-312 Lisboa
>>>>> N 38°43'56.84", W 9°9'35.74"
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Portugal mailing list
>>>>> Portugal lists.osgeo.org <mailto:Portugal lists.osgeo.org>
>>>>> http://lists.osgeo.org/mailman/listinfo/portugal
>>>>
>>>>
>>>> _______________________________________________
>>>> Portugal mailing list
>>>> Portugal lists.osgeo.org <mailto:Portugal lists.osgeo.org>
>>>> http://lists.osgeo.org/mailman/listinfo/portugal
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Hugo Martins
>>>> LabNT - ISEGI UNL
>>>> Campus de Campolide
>>>> 1070-312 Lisboa
>>>> N 38°43'56.84", W 9°9'35.74"
>>>>
>>>>
>>>> _______________________________________________
>>>> Portugal mailing list
>>>> Portugal lists.osgeo.org <mailto:Portugal lists.osgeo.org>
>>>> http://lists.osgeo.org/mailman/listinfo/portugal
>>>
>>
>>
>> _______________________________________________
>> Portugal mailing list
>> Portugal lists.osgeo.org <mailto:Portugal lists.osgeo.org>
>> http://lists.osgeo.org/mailman/listinfo/portugal
>>
>>
>>
>>
>> --
>> Hugo Martins
>> LabNT - ISEGI UNL
>> Campus de Campolide
>> 1070-312 Lisboa
>> N 38°43'56.84", W 9°9'35.74"
>>
>>
>> _______________________________________________
>> Portugal mailing list
>> Portugal lists.osgeo.org <mailto:Portugal lists.osgeo.org>
>> http://lists.osgeo.org/mailman/listinfo/portugal
>
>
> _______________________________________________
> Portugal mailing list
> Portugal lists.osgeo.org <mailto:Portugal lists.osgeo.org>
> http://lists.osgeo.org/mailman/listinfo/portugal
>
>
>
>
> --
> Hugo Martins
> LabNT - ISEGI UNL
> Campus de Campolide
> 1070-312 Lisboa
> N 38°43'56.84", W 9°9'35.74"
>
>
> _______________________________________________
> Portugal mailing list
> Portugal lists.osgeo.org
> http://lists.osgeo.org/mailman/listinfo/portugal
-------------- próxima parte ----------
Um anexo em HTML foi limpo...
URL: http://lists.osgeo.org/pipermail/portugal/attachments/20111214/026dc23c/attachment-0001.html
Mais informações acerca da lista Portugal