[Qgis-user] QGIS tracking/fieldwork application
Leo Kris Palao
lk.palao at gmail.com
Mon Mar 16 21:39:39 PDT 2015
Thanks Bo,
I will have a look on the Roam QGIS. Can you also suggest some blogs or
websites using Android tablet?
Thanks,
-Leo
On Tue, Mar 17, 2015 at 3:01 AM, <qgis-user-request at lists.osgeo.org> wrote:
> Send Qgis-user mailing list submissions to
> qgis-user at lists.osgeo.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.osgeo.org/mailman/listinfo/qgis-user
> or, via email, send a message with subject or body 'help' to
> qgis-user-request at lists.osgeo.org
>
> You can reach the person managing the list at
> qgis-user-owner at lists.osgeo.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Qgis-user digest..."
>
>
> Today's Topics:
>
> 1. Re: Line symbols with edge along the line and without edge at
> the ends? (Andreas Neumann)
> 2. Re: QGIS tracking/fieldwork application (Bo Victor Thomsen)
> 3. Oracle connection Timeout (Hillers Heather)
> 4. Re: Oracle connection Timeout (J?rgen E. Fischer)
> 5. Can't access Oracle sequences (PIERRE Sylvain)
> 6. Add New Records to Relation or Non-Spatial Table Using "Line
> Entry" (vs "Form Entry") (Jeffrey Durrence)
> 7. Building an input form with choice-dependent dropdown lists
> (Jeffrey Durrence)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 16 Mar 2015 11:18:11 +0100
> From: Andreas Neumann <a.neumann at carto.net>
> To: qgis-user at lists.osgeo.org
> Subject: Re: [Qgis-user] Line symbols with edge along the line and
> without edge at the ends?
> Message-ID: <5506ADE3.4050206 at carto.net>
> Content-Type: text/plain; charset="windows-1252"; Format="flowed"
>
> Hi,
>
> This is possible. Make sure that you enable symbol levels (button
> "Advanced -> Symbol levels at the lower right of the symbology dialogue)
> and set the line endings to "flat" (not square or round).
>
> Andreas
>
> On 16.03.2015 10:47, Elstermann, Mike wrote:
> >
> > Line symbols with edge along the line and without edge at the ends?
> >
> > Left NOT OK, Right OK
> >
> > THX, mikeE.
> >
> >
> >
> > _______________________________________________
> > Qgis-user mailing list
> > Qgis-user at lists.osgeo.org
> > http://lists.osgeo.org/mailman/listinfo/qgis-user
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.osgeo.org/pipermail/qgis-user/attachments/20150316/5991d658/attachment-0001.html
> >
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: not available
> Type: image/jpeg
> Size: 5997 bytes
> Desc: not available
> URL: <
> http://lists.osgeo.org/pipermail/qgis-user/attachments/20150316/5991d658/attachment-0001.jpe
> >
>
> ------------------------------
>
> Message: 2
> Date: Mon, 16 Mar 2015 11:25:57 +0100
> From: Bo Victor Thomsen <bo.victor.thomsen at gmail.com>
> To: qgis-user at lists.osgeo.org
> Subject: Re: [Qgis-user] QGIS tracking/fieldwork application
> Message-ID: <5506AFB5.9030500 at gmail.com>
> Content-Type: text/plain; charset="windows-1252"; Format="flowed"
>
> Try googling "Roam QGIS". Roam is a new "skin" aka user interface (and
> more) for QGIS, enabling it to function better on a windows tablet.
>
> Regards
> Bo Victor Thomsen
> AestasGIS
> Denmark
>
>
>
> Den 16-03-2015 kl. 08:54 skrev Leo Kris Palao:
> > Hi QGIS Users,
> >
> > Good day!
> >
> > I watched the live tracking video of QGIS in
> > https://www.youtube.com/watch?v=0WevRW4tbzs&t=253
> >
> >
> > (Live Tracking and sampling with Quantum GIS, a tablet PC and a
> > Bluetooth datalogger)
> >
> >
> > I am interested to the same. I am particularly interested on how I can
> > customize my forms such that when I digitize a point, I can use drop
> > down menu options, combo box, etc. If you could point me in the right
> > direction (blogs, websites), will be very helpful.
> >
> > Thanks,
> > -Leo
> >
> >
> > _______________________________________________
> > Qgis-user mailing list
> > Qgis-user at lists.osgeo.org
> > http://lists.osgeo.org/mailman/listinfo/qgis-user
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.osgeo.org/pipermail/qgis-user/attachments/20150316/c4e1093b/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 3
> Date: Mon, 16 Mar 2015 14:12:23 +0100
> From: Hillers Heather <Heather.Hillers at erftverband.de>
> To: "'qgis-user at lists.osgeo.org'" <qgis-user at lists.osgeo.org>
> Subject: [Qgis-user] Oracle connection Timeout
> Message-ID:
> <92B765D2B126E24EA4AC2F4F29B85AEF02610FD8E7 at exsrv2.erftverband.de>
> Content-Type: text/plain; charset="us-ascii"
>
> We have a QGIS installation running with a Oracle 12 Database.
> If we open the Qgis Oracle Connection window and set up a connection
> without saving our username and password, then click on the connect button,
> and then add any table to qgis, our DBA gets the error below:
>
> We are experiencing the same problem whether we are connecting from our
> QGIS 2.2 installation on Linux or our QGIS 2.6 installation on Windows. We
> experience the same problem with 2 different databases, and with 2
> different oracle servers. We have tried increasing the connection timeout
> on the oracle side to 200 seconds, with no effect. From qgis, we see no
> hang or connection problems. We are quickly asked for our credentials and
> the layer loads successfully. The error usually comes after the load is
> complete. These errors also come with the opening of projects with Oracle
> tables in them. The end result is that we have to do a daily reboot of our
> TNS Listener. Our DBA finds this unacceptable, particularly since the
> number of users is expected to rise sharply. I am not seeing any reports
> of other users with this problem. Any ideas?
>
> Thanks,
>
> Heather
>
> The error:
>
> Fatal NI connect error 12170.
>
> VERSION INFORMATION:
> TNS for Linux: Version 11.2.0.4.0 - Production
> Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.4.0
> - Production
> TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.4.0 -
> Production
> Time: 16-MAR-2015 13:36:21
> Tracing not turned on.
> Tns error struct:
> ns main err code: 12535
>
> TNS-12535: TNS:operation timed out
> ns secondary err code: 12606
> nt main err code: 0
> nt secondary err code: 0
> nt OS err code: 0
> Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.100.78.43)(PORT=49830))
> WARNING: inbound connection timed out (ORA-3136)
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.osgeo.org/pipermail/qgis-user/attachments/20150316/3dd72fe6/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 4
> Date: Mon, 16 Mar 2015 16:23:44 +0100
> From: J?rgen E. Fischer <jef at norbit.de>
> To: qgis-user at lists.osgeo.org
> Subject: Re: [Qgis-user] Oracle connection Timeout
> Message-ID: <20150316152343.GA11634 at norbit.de>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi Heather,
>
> On Mon, 16. Mar 2015 at 14:12:23 +0100, Hillers Heather wrote:
> > We have a QGIS installation running with a Oracle 12 Database.
> > If we open the Qgis Oracle Connection window and set up a connection
> without
> > saving our username and password, then click on the connect button, and
> then
> > add any table to qgis, our DBA gets the error below:
>
> > We are experiencing the same problem whether we are connecting from our
> QGIS
> > 2.2 installation on Linux or our QGIS 2.6 installation on Windows. We
> > experience the same problem with 2 different databases, and with 2
> different
> > oracle servers. We have tried increasing the connection timeout on the
> > oracle side to 200 seconds, with no effect. From qgis, we see no hang or
> > connection problems. We are quickly asked for our credentials and the
> layer
> > loads successfully. The error usually comes after the load is complete.
> > These errors also come with the opening of projects with Oracle tables in
> > them. The end result is that we have to do a daily reboot of our TNS
> > Listener. Our DBA finds this unacceptable, particularly since the
> number of
> > users is expected to rise sharply. I am not seeing any reports of other
> > users with this problem. Any ideas?
>
> Never seen this either. Googling suggests that it might be a firewall
> between
> client & server that kills "idle" connections.
>
>
> J?rgen
>
> --
> J?rgen E. Fischer norBIT GmbH Tel. +49-4931-918175-31
> Dipl.-Inf. (FH) Rheinstra?e 13 Fax. +49-4931-918175-50
> Software Engineer D-26506 Norden
> http://www.norbit.de
> QGIS release manager (PSC) Germany IRC: jef on FreeNode
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: signature.asc
> Type: application/pgp-signature
> Size: 827 bytes
> Desc: Digital signature
> URL: <
> http://lists.osgeo.org/pipermail/qgis-user/attachments/20150316/53749597/attachment-0001.pgp
> >
>
> ------------------------------
>
> Message: 5
> Date: Mon, 16 Mar 2015 18:01:35 +0100
> From: PIERRE Sylvain <sylvain.pierre at cg67.fr>
> To: "qgis-user at lists.osgeo.org" <qgis-user at lists.osgeo.org>
> Subject: [Qgis-user] Can't access Oracle sequences
> Message-ID:
> <374F2A33A0F46242B3A1F52EB8A1E8B4010E6128F4B1 at EXCHMBX-V.cg67.fr>
> Content-Type: text/plain; charset="utf-8"
>
> Hello,
> With Postgis/QGIS configuration I can manage sequences on primary key when
> editing new object (editing forms show a nextval(?xxxxxxxxxx?::regclass)
> formula in pk field)
> With my Oracle/QGIS conf I can?t manage sequences, and editing failed when
> I want to save.
> Where is the problem?
> Is it an Oracle provider issue ?
> Is it a GRANT privilege problem on sequences?
>
> Thanks
>
> Sylvain
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.osgeo.org/pipermail/qgis-user/attachments/20150316/ce2b74a4/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 6
> Date: Mon, 16 Mar 2015 13:29:47 -0400 (EDT)
> From: Jeffrey Durrence <jeffrey.durrence at mcleanengineering.com>
> To: qgis-user at lists.osgeo.org
> Subject: [Qgis-user] Add New Records to Relation or Non-Spatial Table
> Using "Line Entry" (vs "Form Entry")
> Message-ID:
> <
> 589410826.470196.1426526987212.JavaMail.root at mcleanengineering.com>
> Content-Type: text/plain; charset=utf-8
>
> Great work to all who have been a part of improving the user's ability to
> customize input forms!
>
> My question is about the way that new records are added to either a
> relation (created to handle a one to many relationship between two tables)
> or to a non-spatial table. In either case, the attributes for the new
> record are input using the form (either the default one or one that's been
> customized by the user). In my case, I would actually benefit by creating
> new records from the "table view." Since the various widgets are available
> from the table view, I don't see a disadvantage for using this approach.
> As is, I can modify existing records from the table view, but each time I
> create a new one, I must use the form to populate the attributes.
>
> I have searched for a way to change this in the QGIS settings and project
> properties, but I am unable to find and available setting. Can this
> behavior be changed?
>
> Thanks!
>
> --
> Jeffrey Durrence
> McLean Engineering Company
> jeffrey.durrence at mcleanengineering.com
>
>
> ------------------------------
>
> Message: 7
> Date: Mon, 16 Mar 2015 13:45:59 -0400 (EDT)
> From: Jeffrey Durrence <jeffrey.durrence at mcleanengineering.com>
> To: qgis-user at lists.osgeo.org
> Subject: [Qgis-user] Building an input form with choice-dependent
> dropdown lists
> Message-ID:
> <
> 366223421.470278.1426527959844.JavaMail.root at mcleanengineering.com>
> Content-Type: text/plain; charset=utf-8
>
> Hi,
>
> I have created an input form using the Drag and Drop designer, The form
> has multiple dropdown widgets that are either "value map" or "value
> relation" widgets. To minimize input errors, I need to make a form whose
> dropdrowns are completed in a certain order and whose dropdown values are
> based on the preceding choices. From what I have read, it appears that
> this is where I would need to venture into customization with QT designer
> and/or python init scripts. Having read through several examples of form
> customization and Python scripts, I have spent more time on clever ways of
> achieving similar functionality with data tricks (e.g., attaching multiple
> times to the same table or views derived from the same table and employing
> filtering on each), but I have created what appears to be an overly
> complicated solution.
>
> If QT designer + python scripting holds the most promise, I'd appreciate
> advice on a good "entry point" for learning these techniques. I have a
> located a few texts on QGIS development, but I don't know if they are the
> best for what I'm trying to do. Also, if there are other mailing lists or
> groups that might help me, I'd welcome that input as well.
>
> Thanks!
>
> --
> Jeffrey Durrence
> McLean Engineering Company
> jeffrey.durrence at mcleanengineering.com
>
>
> ------------------------------
>
> _______________________________________________
> Qgis-user mailing list
> Qgis-user at lists.osgeo.org
> http://lists.osgeo.org/mailman/listinfo/qgis-user
>
> End of Qgis-user Digest, Vol 109, Issue 30
> ******************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osgeo.org/pipermail/qgis-user/attachments/20150317/4ce2e67a/attachment.html>
More information about the Qgis-user
mailing list