<div dir="ltr"><div>Hello !</div><div><br></div><div>I'have not a good English, I hope you can understand me !</div><div><br></div><div>I work with QGIS 3.44.</div><div><br></div><div>I work with a digital terrain model like this : (I explain below!)</div><div><br></div><div><img src="cid:ii_ml8855zu1" alt="image.png" width="556" height="460"><br><br></div><div><br></div><div>With that, i create a new layer raster, this :</div><div><br></div><div><img src="cid:ii_ml886b3e2" alt="image.png" width="556" height="428"><br><br></div><div>But I don't know how 😅</div><div><br></div><div>If I transform the raster in the layer and after vecteur in the raster. I know I didn't use mesh or grid. And I know It wasn't difficult. </div><div><br></div><div>But it's impossible for me to recreate this !!</div><div><br></div><div>I like this layer because the relief curves are very good !</div><div><br></div><div>It has 50x50 pixels. </div><div><br></div><div>And a ladder is not similar.</div><div><br></div><div>The first picture is between 300-500 and a second is 100-200. But I don't choose it.</div><div><br></div><div>If you understand my problem, I have little question, so what layer has a good altitude ?</div><div><br></div><div>Can you help me please ! This is so amazing !</div><div><br></div><div>Have a good day !</div><div></div></div>