[SAC] [support.osuosl.org #30704] OSGeo Server Parts Order

Lance Albertson via RT support at osuosl.org
Wed Aug 28 09:30:41 PDT 2019


On Mon Aug 26 10:03:08 2019, ramereth wrote:
> Yes that does! I'll get that going later today or tomorrow. What ssh keys
> should I put on the system so you can access it?

This system has been finally setup. You should be able to access it using the
tech_dev user by going to osgeo4.osgeo.osuosl.org. I've disabled password logins
via ssh but have added the ssh keys you sent to the tech_dev user. The password
for the user is 'oaDOGqlWNRMvgqXY9XCc' which you should change once you login.

Here's how I setup the system:

root at osgeo4:~# lsblk -i
NAME           MAJ:MIN RM  SIZE RO TYPE  MOUNTPOINT
sda              8:0    0  1.8T  0 disk  
|-sda1           8:1    0  953M  0 part  
| `-md0          9:0    0  952M  0 raid1 /boot
`-sda2           8:2    0 46.6G  0 part  
  `-md1          9:1    0 46.5G  0 raid1 
    |-lvm-root 253:0    0 37.3G  0 lvm   /
    `-lvm-swap 253:1    0  7.5G  0 lvm   [SWAP]
sdb              8:16   0  1.8T  0 disk  
|-sdb1           8:17   0  953M  0 part  
| `-md0          9:0    0  952M  0 raid1 /boot
`-sdb2           8:18   0 46.6G  0 part  
  `-md1          9:1    0 46.5G  0 raid1 
    |-lvm-root 253:0    0 37.3G  0 lvm   /
    `-lvm-swap 253:1    0  7.5G  0 lvm   [SWAP]
sdc              8:32   0  1.8T  0 disk  
sdd              8:48   0  1.8T  0 disk  
sde              8:64   0  1.8T  0 disk  
sdf              8:80   0  1.8T  0 disk  

Both sda and sdb have 1.9TB left to be allocated via a partition that you could
use for ZFS. Please let me know when you're able to login and able to gain root
access.

Thanks-

-- 
Lance Albertson
Director
Oregon State University | Open Source Lab 


More information about the Sac mailing list