[Tilecache] Re:Tilecache Digest, Vol 61, Issue 4

Sun Feb 26 21:02:39 EST 2012

I don't want to receive these letters any more,could you please me how to stop that,thank you.
At 2012-02-26 01:00:11,tilecache-request at lists.osgeo.org wrote:
>Send Tilecache mailing list submissions to
>	tilecache at lists.osgeo.org
>
>To subscribe or unsubscribe via the World Wide Web, visit
>	http://lists.osgeo.org/mailman/listinfo/tilecache
>or, via email, send a message with subject or body 'help' to
>	tilecache-request at lists.osgeo.org
>
>You can reach the person managing the list at
>	tilecache-owner at lists.osgeo.org
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of Tilecache digest..."
>
>
>Today's Topics:
>
>   1. Tilecache and QGIS status bar messagge (aborruso)
>   2. Re: Tilecache and QGIS status bar messagge (Mr. Puneet Kishor)
>   3. Re: Tilecache and QGIS status bar messagge (aborruso)
>   4. Re: Re: Tilecache and QGIS status bar messagge (Puneet Kishor)
>   5. Re: Tilecache and QGIS status bar messagge (aborruso)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Fri, 24 Feb 2012 09:11:13 -0800 (PST)
>From: aborruso <aborruso at gmail.com>
>Subject: [Tilecache] Tilecache and QGIS status bar messagge
>To: tilecache at lists.osgeo.org
>Message-ID: <1330103473917-4503432.post at n6.nabble.com>
>Content-Type: text/plain; charset=us-ascii
>
>Dear all,
>I have set a tilecache server and I load layers in QGIS from it via a WMS
>connection.
>
>I have used the seeding utility for a specific layer for all zoom levels.
>When I load this layer in QGIS, it loads it properly and I have in the
>status bar "0 tiles request in background, 0 cache hits, 13 cache misses, 0
>errors".
>What's the meaning of "13 cache misses"? Does QGIS read the cached images or
>it forces the creation of them?
>
>Thank you very much,
>
>a 
>
>--
>View this message in context: http://osgeo-org.1560.n6.nabble.com/Tilecache-and-QGIS-status-bar-messagge-tp4503432p4503432.html
>Sent from the TileCache mailing list archive at Nabble.com.
>
>
>------------------------------
>
>Message: 2
>Date: Fri, 24 Feb 2012 11:22:30 -0600
>From: "Mr. Puneet Kishor" <punk.kish at gmail.com>
>Subject: Re: [Tilecache] Tilecache and QGIS status bar messagge
>To: tilecache at lists.osgeo.org
>Message-ID: <C1677BEF-B50E-45EF-A4BD-39B2089842FA at gmail.com>
>Content-Type: text/plain; charset=us-ascii
>
>
>On Feb 24, 2012, at 11:11 AM, aborruso wrote:
>
>> Dear all,
>> I have set a tilecache server and I load layers in QGIS from it via a WMS
>> connection.
>> 
>> I have used the seeding utility for a specific layer for all zoom levels.
>> When I load this layer in QGIS, it loads it properly and I have in the
>> status bar "0 tiles request in background, 0 cache hits, 13 cache misses, 0
>> errors".
>> What's the meaning of "13 cache misses"? Does QGIS read the cached images or
>> it forces the creation of them?
>
>
>0 tiles request in background: nothing is being requested
>0 cache hits: nothing was found in the cache
>13 cache misses: 13 tiles were requested but not found in the cache, so they were requested from the server
>0 errors: no snafu
>
>
>Try reloading the exact same view and check the messages again.
>
>
>--
>Puneet Kishor
>
>------------------------------
>
>Message: 3
>Date: Fri, 24 Feb 2012 10:41:12 -0800 (PST)
>From: aborruso <aborruso at gmail.com>
>Subject: [Tilecache] Re: Tilecache and QGIS status bar messagge
>To: tilecache at lists.osgeo.org
>Message-ID: <1330108872609-4503666.post at n6.nabble.com>
>Content-Type: text/plain; charset=us-ascii
>
>Hi Puneet,
>thank you.
>
>
>Puneet Kishor wrote
>> 
>> On Feb 24, 2012, at 11:11 AM, aborruso wrote:
>> 
>> 0 tiles request in background: nothing is being requested
>> 0 cache hits: nothing was found in the cache
>> 13 cache misses: 13 tiles were requested but not found in the cache, so
>> they were requested from the server
>> 0 errors: no snafu
>> 
>> Try reloading the exact same view and check the messages again.
>> 
>
>Please look at this video:
>http://www.screencast-o-matic.com/watch/clnZFQz6I
>
>I make some pan and zoom and generate the relative tiles. Then starting from
>00:40 time my map requests are always in the same area, and it's no more
>necessary to produce tiles, and the number of tiles does not change any
>more. This is right, but in QGIS status bar I have "... cache misses".
>
>Is it normal?
>
>Best regards,
>
>Andrea
>
>--
>View this message in context: http://osgeo-org.1560.n6.nabble.com/Tilecache-and-QGIS-status-bar-messagge-tp4503432p4503666.html
>Sent from the TileCache mailing list archive at Nabble.com.
>
>
>------------------------------
>
>Message: 4
>Date: Fri, 24 Feb 2012 13:04:42 -0600
>From: Puneet Kishor <punk.kish at gmail.com>
>Subject: Re: [Tilecache] Re: Tilecache and QGIS status bar messagge
>To: aborruso <aborruso at gmail.com>
>Cc: tilecache at lists.osgeo.org
>Message-ID: <A7E5C7A7-CE08-4FA6-BC1D-6755E9F3A856 at gmail.com>
>Content-Type: text/plain; charset=us-ascii
>
>
>On Feb 24, 2012, at 12:41 PM, aborruso wrote:
>
>> Hi Puneet,
>> thank you.
>> 
>> 
>> Puneet Kishor wrote
>>> 
>>> On Feb 24, 2012, at 11:11 AM, aborruso wrote:
>>> 
>>> 0 tiles request in background: nothing is being requested
>>> 0 cache hits: nothing was found in the cache
>>> 13 cache misses: 13 tiles were requested but not found in the cache, so
>>> they were requested from the server
>>> 0 errors: no snafu
>>> 
>>> Try reloading the exact same view and check the messages again.
>>> 
>> 
>> Please look at this video:
>> http://www.screencast-o-matic.com/watch/clnZFQz6I
>> 
>> I make some pan and zoom and generate the relative tiles. Then starting from
>> 00:40 time my map requests are always in the same area, and it's no more
>> necessary to produce tiles, and the number of tiles does not change any
>> more. This is right, but in QGIS status bar I have "... cache misses".
>> 
>> Is it normal?
>> 
>
>
>Sorry, I am not knowledgable about this enough to comment either way. Plus, I don't know how and to what is your QGIS connecting in order to get the tiles. However, when I connect my QGIS to my tilecache service, and then I watch the MapServer logs (I am using MapServer), I can tell very clearly when MapServer is generating new tiles and when it is not doing anything yet the tiles are being served from the cache.
>
>
>
>--
>Puneet Kishor
>
>------------------------------
>
>Message: 5
>Date: Sat, 25 Feb 2012 01:36:36 -0800 (PST)
>From: aborruso <aborruso at gmail.com>
>Subject: [Tilecache] Re: Tilecache and QGIS status bar messagge
>To: tilecache at lists.osgeo.org
>Message-ID: <1330162596910-4505769.post at n6.nabble.com>
>Content-Type: text/plain; charset=us-ascii
>
>Hi Punet,
>thank you.
>
>
>Puneet Kishor wrote
>> 
>> On Feb 24, 2012, at 12:41 PM, aborruso wrote:
>> Sorry, I am not knowledgable about this enough to comment either way.
>> Plus, I don't know how and to what is your QGIS connecting in order to get
>> the tiles. However, when I connect my QGIS to my tilecache service, and
>> then I watch the MapServer logs (I am using MapServer), I can tell very
>> clearly when MapServer is generating new tiles and when it is not doing
>> anything yet the tiles are being served from the cache.
>> 
>
>Your idea about log file is great. I have used it and I see that MapServer
>does not generate new tile. Then it seems a QGIS bug. I will write in its
>mailing list.
>
>Best regards,
>
>a
>
>
>--
>View this message in context: http://osgeo-org.1560.n6.nabble.com/Tilecache-and-QGIS-status-bar-messagge-tp4503432p4505769.html
>Sent from the TileCache mailing list archive at Nabble.com.
>
>
>------------------------------
>
>_______________________________________________
>Tilecache mailing list
>Tilecache at lists.osgeo.org
>http://lists.osgeo.org/mailman/listinfo/tilecache
>
>
>End of Tilecache Digest, Vol 61, Issue 4
>****************************************