[FOSS-GPS] mixing and matching GPS receivers

[Felipe G. Nievinski]

If you'll be doing relative positioning, only the observations in common
across the two receivers will get utilized. So non-GPS GNSS recorded in the
base (GLO,GAL,BDS) will be discarded if the rover collects only GPS.
-F.


> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 2 Sep 2014 07:06:44 -0700
> From: Verivaldo Teles <verivaldo at yahoo.com.br>
> To: Open Source GPS-related discussion and support
>         <foss-gps at lists.osgeo.org>
> Subject: [FOSS-GPS] mixing and matching GPS receivers
> Message-ID:
>         <1409666804.53243.YahooMailNeo at web140006.mail.bf1.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
>
>
>
> Hello,
>
> I am starting a project which consist in a GPS base station and a rover
> also with GSP receiver, then communicate each other to make corrections in
> the rover's pathway. In this station I am planning to run RTKLIB in a
> Raspberry Pi. However I am not sure which GSP receiver I should use.
>
>  Because of costs I've been thinking of use a GSP/GLONASS/GALILEO/COMPASS
> receiver (in this case I've been thinking in a NV08C-CSM-BRD) for the base
> station
> , but a cheap single GPS receiver for the rover. Anyone could think about
> a possible problem dealing with this way to develop this project? Any
> possible incompatibility?
>
> Thanks
>
> Verivaldo Teles Lobo Filho
> Celular: (71) 9222-3007
> verivaldo at cubostecnologia.com.br
> verivaldo at usp.br
> verivaldo at yahoo.com.br
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.osgeo.org/pipermail/foss-gps/attachments/20140902/337ef667/attachment-0001.html
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osgeo.org/pipermail/foss-gps/attachments/20140902/024321f5/attachment.html>