[Geomoose-users] Print ESRI AGS Rest Service

[Moore, Richard J]

Has anyone figured out how to make AGS layers print?  I see from the forums that there was discussion and that there is a way, but could the code be shared.  I was hoping to be able to have one back ground layer print.

Thank you for your time.

Rick

Rick Moore
GIS Research Analyst
Water Resources Center
Minnesota State University Mankato
189 Trafton Science Center South
Mankato, MN 56001
(507) 389-3267 - Work
(507) 381-7398 - Mobile
richard.moore at mnsu.edu<mailto:richard.moore at mnsu.edu>

From: Brian Fischer [mailto:bfischer at houstoneng.com]
Sent: Wednesday, February 02, 2011 9:11 PM
To: Dan Little; Julson, Adam (DOT); geomoose-users at lists.sourceforge.net
Subject: Re: [Geomoose-users] Print ESRI AGS Rest Service

We have modified the print service to get these to print.  I would have to dig out what we did to make them print, can’t exactly remember.  It’s a little slow but it works.  Here’s an example.  http://rcwd.houstoneng.net/ditchviewer_public.php

Brian Fischer, CFM  GIS Manager
Houston Engineering, Inc.
Phone: Direct: 763-493-6664 / W: 763.493.4522 / M: 763.229.2734

From: Dan Little [mailto:danlittle at yahoo.com]
Sent: Wednesday, February 02, 2011 6:12 PM
To: Julson, Adam (DOT); geomoose-users at lists.sourceforge.net
Subject: Re: [Geomoose-users] Print ESRI AGS Rest Service

Right now, AGS layers do not print.

From: "Julson, Adam (DOT)" <Adam.Julson at state.mn.us>
To: "geomoose-users at lists.sourceforge.net" <geomoose-users at lists.sourceforge.net>
Sent: Wed, February 2, 2011 3:21:30 PM
Subject: [Geomoose-users] Print ESRI AGS Rest Service
I think this has been brought up before but I can’t find if there was a solution or not.  In Geomoose, ESRI AGS Rest Services don’t seem to want to print.  Here is my mapsource entry:

<map-source name="esriaerial" type="ags" reference="false">
      http://services.arcgisonline.com/ArcGIS/rest/services/World_Imagery/MapServer/export
      <layer name="World_Imagery" reference="false"/>
      <param name="FORMAT" value="JPG"/>
</map-source>

Anyone know of a way to get these to print?

Thanks,
Adam


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.osgeo.org/pipermail/geomoose-users/attachments/20110502/82825622/attachment.html