[geos-devel] Re: Problems with installation of geos on RedHat 9
(third try, i hope this is text)
Johan V
jvhoppli at gmail.com
Thu May 18 06:44:47 EDT 2006
Well, now i got a lot further, but still not to the end. The configure
output is a bit the same i think, but this is the make output:
...
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT IntersectionMatrix.lo -MD -MP -MF
.deps/IntersectionMatrix.Tpo -c IntersectionMatrix.cpp -fPIC -DPIC -o
.libs/IntersectionMatrix.o
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT IntersectionMatrix.lo -MD -MP -MF
.deps/IntersectionMatrix.Tpo -c IntersectionMatrix.cpp -o
IntersectionMatrix.o >/dev/null 2>&1
if /bin/sh ../../libtool --mode=compile --tag=CXX g++ -DHAVE_CONFIG_H
-I. -I. -I../../source/headers -I../../source/headers/geos
-I../../source/headers -g -O2 -DGEOS_INLINE -MT LinearRing.lo -MD
-MP -MF ".deps/LinearRing.Tpo" -c -o LinearRing.lo
LinearRing.cpp; \
then mv -f ".deps/LinearRing.Tpo" ".deps/LinearRing.Plo"; else rm -f
".deps/LinearRing.Tpo"; exit 1; fi
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT LinearRing.lo -MD -MP -MF .deps/LinearRing.Tpo -c
LinearRing.cpp -fPIC -DPIC -o .libs/LinearRing.o
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT LinearRing.lo -MD -MP -MF .deps/LinearRing.Tpo -c
LinearRing.cpp -o LinearRing.o >/dev/null 2>&1
if /bin/sh ../../libtool --mode=compile --tag=CXX g++ -DHAVE_CONFIG_H
-I. -I. -I../../source/headers -I../../source/headers/geos
-I../../source/headers -g -O2 -DGEOS_INLINE -MT LineSegment.lo -MD
-MP -MF ".deps/LineSegment.Tpo" -c -o LineSegment.lo LineSegment.cpp;
\
then mv -f ".deps/LineSegment.Tpo" ".deps/LineSegment.Plo"; else rm -f
".deps/LineSegment.Tpo"; exit 1; fi
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT LineSegment.lo -MD -MP -MF .deps/LineSegment.Tpo -c
LineSegment.cpp -fPIC -DPIC -o .libs/LineSegment.o
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT LineSegment.lo -MD -MP -MF .deps/LineSegment.Tpo -c
LineSegment.cpp -o LineSegment.o >/dev/null 2>&1
if /bin/sh ../../libtool --mode=compile --tag=CXX g++ -DHAVE_CONFIG_H
-I. -I. -I../../source/headers -I../../source/headers/geos
-I../../source/headers -g -O2 -DGEOS_INLINE -MT LineString.lo -MD
-MP -MF ".deps/LineString.Tpo" -c -o LineString.lo
LineString.cpp; \
then mv -f ".deps/LineString.Tpo" ".deps/LineString.Plo"; else rm -f
".deps/LineString.Tpo"; exit 1; fi
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT LineString.lo -MD -MP -MF .deps/LineString.Tpo -c
LineString.cpp -fPIC -DPIC -o .libs/LineString.o
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT LineString.lo -MD -MP -MF .deps/LineString.Tpo -c
LineString.cpp -o LineString.o >/dev/null 2>&1
if /bin/sh ../../libtool --mode=compile --tag=CXX g++ -DHAVE_CONFIG_H
-I. -I. -I../../source/headers -I../../source/headers/geos
-I../../source/headers -g -O2 -DGEOS_INLINE -MT Location.lo -MD
-MP -MF ".deps/Location.Tpo" -c -o Location.lo Location.cpp; \
then mv -f ".deps/Location.Tpo" ".deps/Location.Plo"; else rm -f
".deps/Location.Tpo"; exit 1; fi
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT Location.lo -MD -MP -MF .deps/Location.Tpo -c
Location.cpp -fPIC -DPIC -o .libs/Location.o
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT Location.lo -MD -MP -MF .deps/Location.Tpo -c
Location.cpp -o Location.o >/dev/null 2>&1
if /bin/sh ../../libtool --mode=compile --tag=CXX g++ -DHAVE_CONFIG_H
-I. -I. -I../../source/headers -I../../source/headers/geos
-I../../source/headers -g -O2 -DGEOS_INLINE -MT MultiLineString.lo
-MD -MP -MF ".deps/MultiLineString.Tpo" -c -o MultiLineString.lo
MultiLineString.cpp; \
then mv -f ".deps/MultiLineString.Tpo" ".deps/MultiLineString.Plo";
else rm -f ".deps/MultiLineString.Tpo"; exit 1; fi
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT MultiLineString.lo -MD -MP -MF
.deps/MultiLineString.Tpo -c MultiLineString.cpp -fPIC -DPIC -o
.libs/MultiLineString.o
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT MultiLineString.lo -MD -MP -MF
.deps/MultiLineString.Tpo -c MultiLineString.cpp -o MultiLineString.o
>/dev/null 2>&1
if /bin/sh ../../libtool --mode=compile --tag=CXX g++ -DHAVE_CONFIG_H
-I. -I. -I../../source/headers -I../../source/headers/geos
-I../../source/headers -g -O2 -DGEOS_INLINE -MT MultiPoint.lo -MD
-MP -MF ".deps/MultiPoint.Tpo" -c -o MultiPoint.lo
MultiPoint.cpp; \
then mv -f ".deps/MultiPoint.Tpo" ".deps/MultiPoint.Plo"; else rm -f
".deps/MultiPoint.Tpo"; exit 1; fi
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT MultiPoint.lo -MD -MP -MF .deps/MultiPoint.Tpo -c
MultiPoint.cpp -fPIC -DPIC -o .libs/MultiPoint.o
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT MultiPoint.lo -MD -MP -MF .deps/MultiPoint.Tpo -c
MultiPoint.cpp -o MultiPoint.o >/dev/null 2>&1
if /bin/sh ../../libtool --mode=compile --tag=CXX g++ -DHAVE_CONFIG_H
-I. -I. -I../../source/headers -I../../source/headers/geos
-I../../source/headers -g -O2 -DGEOS_INLINE -MT MultiPolygon.lo
-MD -MP -MF ".deps/MultiPolygon.Tpo" -c -o MultiPolygon.lo
MultiPolygon.cpp; \
then mv -f ".deps/MultiPolygon.Tpo" ".deps/MultiPolygon.Plo"; else rm
-f ".deps/MultiPolygon.Tpo"; exit 1; fi
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT MultiPolygon.lo -MD -MP -MF .deps/MultiPolygon.Tpo
-c MultiPolygon.cpp -fPIC -DPIC -o .libs/MultiPolygon.o
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT MultiPolygon.lo -MD -MP -MF .deps/MultiPolygon.Tpo
-c MultiPolygon.cpp -o MultiPolygon.o >/dev/null 2>&1
if /bin/sh ../../libtool --mode=compile --tag=CXX g++ -DHAVE_CONFIG_H
-I. -I. -I../../source/headers -I../../source/headers/geos
-I../../source/headers -g -O2 -DGEOS_INLINE -MT Point.lo -MD -MP
-MF ".deps/Point.Tpo" -c -o Point.lo Point.cpp; \
then mv -f ".deps/Point.Tpo" ".deps/Point.Plo"; else rm -f
".deps/Point.Tpo"; exit 1; fi
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT Point.lo -MD -MP -MF .deps/Point.Tpo -c Point.cpp
-fPIC -DPIC -o .libs/Point.o
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT Point.lo -MD -MP -MF .deps/Point.Tpo -c Point.cpp -o
Point.o >/dev/null 2>&1
if /bin/sh ../../libtool --mode=compile --tag=CXX g++ -DHAVE_CONFIG_H
-I. -I. -I../../source/headers -I../../source/headers/geos
-I../../source/headers -g -O2 -DGEOS_INLINE -MT Polygon.lo -MD -MP
-MF ".deps/Polygon.Tpo" -c -o Polygon.lo Polygon.cpp; \
then mv -f ".deps/Polygon.Tpo" ".deps/Polygon.Plo"; else rm -f
".deps/Polygon.Tpo"; exit 1; fi
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT Polygon.lo -MD -MP -MF .deps/Polygon.Tpo -c
Polygon.cpp -fPIC -DPIC -o .libs/Polygon.o
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT Polygon.lo -MD -MP -MF .deps/Polygon.Tpo -c
Polygon.cpp -o Polygon.o >/dev/null 2>&1
if /bin/sh ../../libtool --mode=compile --tag=CXX g++ -DHAVE_CONFIG_H
-I. -I. -I../../source/headers -I../../source/headers/geos
-I../../source/headers -g -O2 -DGEOS_INLINE -MT PrecisionModel.lo
-MD -MP -MF ".deps/PrecisionModel.Tpo" -c -o PrecisionModel.lo
PrecisionModel.cpp; \
then mv -f ".deps/PrecisionModel.Tpo" ".deps/PrecisionModel.Plo"; else
rm -f ".deps/PrecisionModel.Tpo"; exit 1; fi
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT PrecisionModel.lo -MD -MP -MF
.deps/PrecisionModel.Tpo -c PrecisionModel.cpp -fPIC -DPIC -o
.libs/PrecisionModel.o
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT PrecisionModel.lo -MD -MP -MF
.deps/PrecisionModel.Tpo -c PrecisionModel.cpp -o PrecisionModel.o
>/dev/null 2>&1
if /bin/sh ../../libtool --mode=compile --tag=CXX g++ -DHAVE_CONFIG_H
-I. -I. -I../../source/headers -I../../source/headers/geos
-I../../source/headers -g -O2 -DGEOS_INLINE -MT Triangle.lo -MD
-MP -MF ".deps/Triangle.Tpo" -c -o Triangle.lo Triangle.cpp; \
then mv -f ".deps/Triangle.Tpo" ".deps/Triangle.Plo"; else rm -f
".deps/Triangle.Tpo"; exit 1; fi
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT Triangle.lo -MD -MP -MF .deps/Triangle.Tpo -c
Triangle.cpp -fPIC -DPIC -o .libs/Triangle.o
g++ -DHAVE_CONFIG_H -I. -I. -I../../source/headers
-I../../source/headers/geos -I../../source/headers -g -O2
-DGEOS_INLINE -MT Triangle.lo -MD -MP -MF .deps/Triangle.Tpo -c
Triangle.cpp -o Triangle.o >/dev/null 2>&1
/bin/sh ../../libtool --mode=link --tag=CXX g++ -g -O2 -DGEOS_INLINE
-o libgeom.la Coordinate.lo CoordinateSequence.lo
CoordinateArraySequence.lo CoordinateArraySequenceFactory.lo
Dimension.lo Envelope.lo Geometry.lo GeometryList.lo
GeometryCollection.lo GeometryComponentFilter.lo GeometryFactory.lo
IntersectionMatrix.lo LinearRing.lo LineSegment.lo LineString.lo
Location.lo MultiLineString.lo MultiPoint.lo MultiPolygon.lo Point.lo
Polygon.lo PrecisionModel.lo Triangle.lo util/libgeomutil.la
rm -fr .libs/libgeom.lax
mkdir .libs/libgeom.lax
mkdir .libs/libgeom.lax/libgeomutil.a
(cd .libs/libgeom.lax/libgeomutil.a && ar x
/home/postgis/geos-3.0.0cvs/source/geom/util/.libs/libgeomutil.a)
ar cru .libs/libgeom.a .libs/Coordinate.o .libs/CoordinateSequence.o
.libs/CoordinateArraySequence.o .libs/CoordinateArraySequenceFactory.o
.libs/Dimension.o .libs/Envelope.o .libs/Geometry.o
.libs/GeometryList.o .libs/GeometryCollection.o
.libs/GeometryComponentFilter.o .libs/GeometryFactory.o
.libs/IntersectionMatrix.o .libs/LinearRing.o .libs/LineSegment.o
.libs/LineString.o .libs/Location.o .libs/MultiLineString.o
.libs/MultiPoint.o .libs/MultiPolygon.o .libs/Point.o .libs/Polygon.o
.libs/PrecisionModel.o .libs/Triangle.o
.libs/libgeom.lax/libgeomutil.a/GeometryEditor.o
.libs/libgeom.lax/libgeomutil.a/GeometryTransformer.o
.libs/libgeom.lax/libgeomutil.a/CoordinateOperation.o
.libs/libgeom.lax/libgeomutil.a/ShortCircuitedGeometryVisitor.o
ranlib .libs/libgeom.a
rm -fr .libs/libgeom.lax
creating libgeom.la
(cd .libs && rm -f libgeom.la && ln -s ../libgeom.la libgeom.la)
make[3]: Leaving directory `/home/postgis/geos-3.0.0cvs/source/geom'
make[2]: Leaving directory `/home/postgis/geos-3.0.0cvs/source/geom'
Making all in headers
make[2]: Entering directory `/home/postgis/geos-3.0.0cvs/source/headers'
make all-recursive
make[3]: Entering directory `/home/postgis/geos-3.0.0cvs/source/headers'
Making all in geos
make[4]: Entering directory `/home/postgis/geos-3.0.0cvs/source/headers/geos'
make all-recursive
make[5]: Entering directory `/home/postgis/geos-3.0.0cvs/source/headers/geos'
Making all in algorithm
make[6]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/algorithm'
make[7]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/algorithm'
make[7]: Nothing to be done for `all-am'.
make[7]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/algorithm'
make[6]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/algorithm'
Making all in geom
make[6]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/geom'
Making all in util
make[7]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/geom/util'
make[8]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/geom/util'
make[8]: Nothing to be done for `all-am'.
make[8]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/geom/util'
make[7]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/geom/util'
make[7]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/geom'
make[7]: Nothing to be done for `all-am'.
make[7]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/geom'
make[6]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/geom'
Making all in geomgraph
make[6]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/geomgraph'
Making all in index
make[7]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/geomgraph/index'
make[8]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/geomgraph/index'
make[8]: Nothing to be done for `all-am'.
make[8]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/geomgraph/index'
make[7]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/geomgraph/index'
make[7]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/geomgraph'
make[7]: Nothing to be done for `all-am'.
make[7]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/geomgraph'
make[6]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/geomgraph'
Making all in index
make[6]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index'
Making all in sweepline
make[7]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/sweepline'
make[8]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/sweepline'
make[8]: Nothing to be done for `all-am'.
make[8]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/sweepline'
make[7]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/sweepline'
Making all in strtree
make[7]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/strtree'
make[8]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/strtree'
make[8]: Nothing to be done for `all-am'.
make[8]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/strtree'
make[7]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/strtree'
Making all in quadtree
make[7]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/quadtree'
make[8]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/quadtree'
make[8]: Nothing to be done for `all-am'.
make[8]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/quadtree'
make[7]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/quadtree'
Making all in bintree
make[7]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/bintree'
make[8]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/bintree'
make[8]: Nothing to be done for `all-am'.
make[8]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/bintree'
make[7]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/bintree'
Making all in chain
make[7]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/chain'
make[8]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/chain'
make[8]: Nothing to be done for `all-am'.
make[8]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/chain'
make[7]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index/chain'
make[7]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index'
make[7]: Nothing to be done for `all-am'.
make[7]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index'
make[6]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/index'
Making all in io
make[6]: Entering directory `/home/postgis/geos-3.0.0cvs/source/headers/geos/io'
make[7]: Entering directory `/home/postgis/geos-3.0.0cvs/source/headers/geos/io'
make[7]: Nothing to be done for `all-am'.
make[7]: Leaving directory `/home/postgis/geos-3.0.0cvs/source/headers/geos/io'
make[6]: Leaving directory `/home/postgis/geos-3.0.0cvs/source/headers/geos/io'
Making all in noding
make[6]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/noding'
Making all in snapround
make[7]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/noding/snapround'
make[8]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/noding/snapround'
make[8]: Nothing to be done for `all-am'.
make[8]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/noding/snapround'
make[7]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/noding/snapround'
make[7]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/noding'
make[7]: Nothing to be done for `all-am'.
make[7]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/noding'
make[6]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/noding'
Making all in operation
make[6]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/operation'
Making all in buffer
make[7]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/operation/buffer'
make[8]: Entering directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/operation/buffer'
make[8]: *** No rule to make target `BufferBuilder.h', needed by
`all-am'. Stop.
make[8]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/operation/buffer'
make[7]: *** [all-recursive] Error 1
make[7]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/operation/buffer'
make[6]: *** [all-recursive] Error 1
make[6]: Leaving directory
`/home/postgis/geos-3.0.0cvs/source/headers/geos/operation'
make[5]: *** [all-recursive] Error 1
make[5]: Leaving directory `/home/postgis/geos-3.0.0cvs/source/headers/geos'
make[4]: *** [all] Error 2
make[4]: Leaving directory `/home/postgis/geos-3.0.0cvs/source/headers/geos'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/home/postgis/geos-3.0.0cvs/source/headers'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/home/postgis/geos-3.0.0cvs/source/headers'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/postgis/geos-3.0.0cvs/source'
make: *** [all-recursive] Error 1
Johan
2006/5/18, strk at refractions.net <strk at refractions.net>:
> On Thu, May 18, 2006 at 12:20:58PM +0200, Johan V wrote:
>
> > `/home/postgis/geos-3.0.0cvs/source/headers/geos/operation/buffer'
> > make[8]: *** No rule to make target `BufferBuilder.h', needed by
>
> ...
>
> > So problems with BufferBuilder.h I think, but what's the solution.
>
> Maybe you have an old snapshot. Can you grab geos from CVS
> directly ?
>
> --strk;
> _______________________________________________
> geos-devel mailing list
> geos-devel at geos.refractions.net
> http://geos.refractions.net/mailman/listinfo/geos-devel
>
More information about the geos-devel
mailing list