[Mapserver-users] FW: adding RASTER Layer
Charlton Purvis
cpurvis at asg.sc.edu
Tue Jul 8 08:44:26 PDT 2003
This didn't seem to make the list. Trying again.
-----Original Message-----
From: Brock Murch [mailto:bmurch at seas.marine.usf.edu]
Sent: Tuesday, July 08, 2003 11:06 AM
To: mapserver-users at lists.gis.umn.edu; Charlton Purvis
Subject: Re: adding RASTER Layer
Charlton:
Thanks for the try... does the list have any ideas? The error
definately has
to do with the raster layer:
STATUS DEFAULT
error_log output:
> __START_LOG__
> [Tue Jul 08 09:31:49 2003] [error] [client 131.247.136.204] Premature
> end of
> script headers: mapserv, referer:
> http://www.imars.usf.edu/tutorial35/s2/s2ex3_test2.html
> __END_LOG__
> I cannot duplicate any of your errors that seem to be cropping up w/
> 4.0b. Upgrading to that would require me to upgrade my gdal
libraries,
> and I'm not quite ready to take that plunge. Wonder if that's it?
>
> Just for kicks, does running
> gdalinfo /var/www/html/tutorial35/data/raster/shdrlfi020g_ugl.tif
> give you back anything intelligible?
gdalinfo /var/www/html/tutorial35/data/raster/shdrlfi020g_ugl.tif
Driver: GTiff/GeoTIFF
Size is 2066, 1023
Coordinate System is `'
Origin = (-98.607616,49.868450)
Pixel Size = (0.009075,-0.009075)
Metadata:
TIFFTAG_SOFTWARE=IMAGINE TIFF Support
Copyright 1991 - 1999 by ERDAS, Inc. All Rights Reserved
@(#)$RCSfile: etif.c $ $Revision: 1.8 $ $Date: 2001/01/25 22:04:51Z $
Corner Coordinates:
Upper Left ( -98.6076164, 49.8684504)
Lower Left ( -98.6076164, 40.5847254)
Upper Right ( -79.8586664, 49.8684504)
Lower Right ( -79.8586664, 40.5847254)
Center ( -89.2331414, 45.2265879)
Band 1 Block=2066x3 Type=Byte, ColorInterp=Palette
Color Table (RGB with 256 entries)
0: 169,209,254,255
1: 156,197,236,255
2: 18,40,48,255
3: 32,60,56,255
4: 43,73,62,255
5: 53,84,66,255
6: 62,94,72,255
7: 70,101,76,255
8: 81,123,88,255
9: 77,108,80,255
10: 92,134,95,255
11: 94,137,96,255
12: 96,139,97,255
13: 3,6,3,255
14: 1,2,1,255
15: 6,11,6,255
16: 85,117,85,255
17: 82,112,81,255
18: 105,148,102,255
19: 12,21,11,255
20: 116,160,110,255
21: 91,122,87,255
22: 17,28,15,255
23: 123,167,114,255
24: 98,130,92,255
25: 24,37,21,255
26: 127,171,117,255
27: 95,125,88,255
28: 89,116,82,255
29: 103,133,95,255
30: 35,51,30,255
31: 106,138,97,255
32: 98,120,91,255
33: 4,7,3,255
34: 110,141,99,255
35: 111,142,100,255
36: 43,62,36,255
37: 52,72,43,255
38: 119,150,104,255
39: 114,144,100,255
40: 118,148,103,255
41: 116,146,102,255
42: 121,150,105,255
43: 102,128,87,255
44: 123,153,105,255
45: 125,155,107,255
46: 107,127,95,255
47: 107,133,90,255
48: 126,156,107,255
49: 128,158,109,255
50: 127,157,108,255
51: 124,153,106,255
52: 111,137,92,255
53: 130,158,109,255
54: 130,159,110,255
55: 114,140,94,255
56: 135,163,112,255
57: 132,159,110,255
58: 136,164,112,255
59: 135,163,111,255
60: 134,161,110,255
61: 133,160,110,255
62: 116,134,100,255
63: 118,142,96,255
64: 140,167,114,255
65: 139,166,114,255
66: 138,165,113,255
67: 72,90,53,255
68: 121,145,96,255
69: 125,149,99,255
70: 148,175,119,255
71: 145,172,117,255
72: 143,170,116,255
73: 142,168,115,255
74: 109,132,83,255
75: 127,151,100,255
76: 124,147,98,255
77: 145,171,116,255
78: 146,172,117,255
79: 147,172,118,255
80: 125,142,105,255
81: 85,104,62,255
82: 128,151,100,255
83: 151,176,119,255
84: 133,155,101,255
85: 134,156,102,255
86: 136,158,104,255
87: 130,152,100,255
88: 157,181,123,255
89: 153,177,120,255
90: 158,182,124,255
91: 155,179,122,255
92: 154,178,121,255
93: 95,113,68,255
94: 136,157,103,255
95: 160,184,124,255
96: 162,186,126,255
97: 156,179,122,255
98: 132,147,108,255
99: 143,164,106,255
100: 141,162,105,255
101: 142,163,106,255
102: 139,159,105,255
103: 165,188,127,255
104: 141,161,105,255
105: 147,167,109,255
106: 170,192,129,255
107: 136,150,110,255
108: 108,123,78,255
109: 149,168,110,255
110: 148,167,109,255
111: 146,165,108,255
112: 145,164,107,255
113: 149,167,110,255
114: 177,197,134,255
115: 141,154,113,255
116: 123,140,85,255
117: 151,169,110,255
118: 154,171,110,255
119: 159,176,114,255
120: 158,175,113,255
121: 156,173,112,255
122: 155,172,111,255
123: 153,170,110,255
124: 157,174,113,255
125: 117,129,84,255
126: 185,203,138,255
127: 162,178,114,255
128: 166,182,117,255
129: 164,180,116,255
130: 147,158,115,255
131: 150,161,118,255
132: 148,162,100,255
133: 164,179,115,255
134: 162,177,114,255
135: 166,181,117,255
136: 161,176,114,255
137: 172,185,119,255
138: 171,185,119,255
139: 169,183,118,255
140: 157,166,121,255
141: 154,163,119,255
142: 154,166,102,255
143: 176,189,121,255
144: 173,186,119,255
145: 180,192,123,255
146: 179,192,123,255
147: 178,190,122,255
148: 174,187,120,255
149: 127,135,93,255
150: 159,167,122,255
151: 161,171,106,255
152: 134,141,97,255
153: 139,146,102,255
154: 164,171,124,255
155: 165,172,125,255
156: 163,170,124,255
157: 161,168,123,255
158: 170,179,111,255
159: 187,197,125,255
160: 185,194,124,255
161: 182,192,124,255
162: 166,173,125,255
163: 190,199,127,255
164: 147,152,105,255
165: 170,175,127,255
166: 169,174,126,255
167: 171,176,128,255
168: 195,202,128,255
169: 174,179,129,255
170: 173,177,128,255
171: 159,163,120,255
172: 204,209,134,255
173: 200,205,132,255
174: 180,183,134,255
175: 179,182,133,255
176: 163,166,123,255
177: 211,214,137,255
178: 160,162,113,255
179: 177,179,130,255
180: 182,184,134,255
181: 179,181,133,255
182: 185,186,135,255
183: 184,185,134,255
184: 220,220,140,255
185: 170,170,119,255
186: 173,173,123,255
187: 189,189,138,255
188: 188,188,137,255
189: 186,186,136,255
190: 172,172,127,255
191: 194,192,139,255
192: 192,191,139,255
193: 191,190,139,255
194: 188,187,137,255
195: 171,170,126,255
196: 173,172,128,255
197: 182,179,127,255
198: 195,192,140,255
199: 178,176,129,255
200: 176,174,128,255
201: 179,177,131,255
202: 191,187,133,255
203: 204,199,144,255
204: 201,197,143,255
205: 183,179,133,255
206: 197,192,140,255
207: 199,194,142,255
208: 210,203,147,255
209: 187,181,134,255
210: 219,208,152,255
211: 227,214,156,255
212: 235,219,160,255
213: 244,225,165,255
214: 0,0,0,255
215: 255,255,255,255
216: 0,0,0,255
217: 0,0,0,255
218: 0,0,0,255
219: 0,0,0,255
220: 0,0,0,255
221: 0,0,0,255
222: 0,0,0,255
223: 0,0,0,255
224: 0,0,0,255
225: 0,0,0,255
226: 0,0,0,255
227: 0,0,0,255
228: 0,0,0,255
229: 0,0,0,255
230: 0,0,0,255
231: 0,0,0,255
232: 0,0,0,255
233: 0,0,0,255
234: 0,0,0,255
235: 0,0,0,255
236: 0,0,0,255
237: 0,0,0,255
238: 0,0,0,255
239: 0,0,0,255
240: 0,0,0,255
241: 0,0,0,255
242: 0,0,0,255
243: 0,0,0,255
244: 0,0,0,255
245: 0,0,0,255
246: 0,0,0,255
247: 0,0,0,255
248: 0,0,0,255
249: 0,0,0,255
250: 0,0,0,255
251: 0,0,0,255
252: 0,0,0,255
253: 0,0,0,255
254: 0,0,0,255
255: 0,0,0,255
> Also, have you tried removing all but the raster layer from your .map?
>
removed everthing but the raster layer no effect...
> suggest you forward it to the list, and
> I'm sure you'll get some folks to bite.
> From: Brock Murch [mailto:bmurch at seas.marine.usf.edu]
> Sent: Tuesday, July 08, 2003 9:30 AM
> To: Charlton Purvis
> Subject: Re: adding RASTER Layer
>
> Charlton:
> Actually that can't be it. Although I did try it earlier as this
> was
> suggested in a follow-up thread to my post to the list. See the
> following...
> with the relevant changes to the map file.
>
> This is using mapserv_4.0b
>
> http://www.imars.usf.edu/tutorial35/s2/s2ex3_test2.html
> LAYER # Shaded Relief Raster
> NAME "relief"
> DATA "/var/www/html/tutorial35/data/raster/shdrlfi020g_ugl.tif"
> STATUS DEFAULT
> # STATUS ON
> TYPE RASTER
> # OFFSITE 0
> END
>
> When I access the above webpage, I get this in the error_log:
> __START_LOG__
> [Tue Jul 08 09:31:49 2003] [error] [client 131.247.136.204] Premature
> end of
> script headers: mapserv, referer:
> http://www.imars.usf.edu/tutorial35/s2/s2ex3_test2.html
> __END_LOG__
>
> http://www.imars.usf.edu/tutorial35/s2/s2ex3_test3.html
> LAYER # Shaded Relief Raster
> NAME "relief"
> DATA "/var/www/html/tutorial35/data/raster/shdrlfi020g_ugl.tif"
> # STATUS DEFAULT
> # STATUS ON
> TYPE RASTER
> # OFFSITE 0
> END
> No error in the error_log
>
> http://www.imars.usf.edu/tutorial35/s2/s2ex3_test4.html
> LAYER # Shaded Relief Raster
> NAME "relief"
> DATA "/var/www/html/tutorial35/data/raster/shdrlfi020g_ugl.tif"
> # STATUS DEFAULT
> STATUS ON
> TYPE RASTER
> # OFFSITE 0
> END
> No error in the error_log
>
> Using mapserv_3.6.5 with the same map files as used above:
>
> http://www.imars.usf.edu/tutorial35/s2/s2ex3_test2_3.6.5.html
> http://www.imars.usf.edu/tutorial35/s2/s2ex3_test3_3.6.5.html
> http://www.imars.usf.edu/tutorial35/s2/s2ex3_test4_3.6.5.html
>
> As you can see this time with STATUS DEFAULT works in 3.6.5
> (s2ex3_test2_3.6.5.html). This was the only change to the map files.
> Both
> versions of mapserv were compiled against the same libs with the exact
> same
> script:
>
> #!/bin/bash
>
> CC=gcc \
> CFLAGS="-O3 -march=pentium4 -mmmx -msse -msse2 -mfpmath=sse" \
> CXX=g++ \
> CXXFLAGS="-O3 -march=pentium4 -mmmx -msse -msse2 -mfpmath=sse" \
> ./configure \
> -v \
> --with-jpeg=/usr/local/hdf \
> --with-gd=/usr/local/tmp/gd-2.0.15 \
> --with-freetype=/usr/bin/freetype-config \
> --with-libz=/usr/local/hdf \
> --with-png \
> --with-pdf \
> --with-tiff=/usr/local/tmp/tiff-v3.6.0-beta2/libtiff/ \
> --with-proj=/usr/local/tmp/proj-4.4.7 \
> --with-gdal=/usr/local/bin/gdal-config \
> --with-ogr \
> --with-postgis \
> --with-wfs \
> --with-wmsclient \
> --with-wfsclient \
> --enable-debug
>
> On the bright side, I was able to use the ersi shapefiles in the
> following
> link along with our data with mapserv 3.6.5:
>
> http://www.imars.usf.edu/tutorial35/s1/s1ex1_test4.html
>
> Do you think this is a bug? Any ideas would be appreciated.
>
> Brock
>
> On Monday 07 July 2003 1:53 pm, you wrote:
> > Brother Brock:
> >
> > It's always the obvious right under our noses that evades us! Look
at
> > the OFFSITE directive in your .map. In 3.7+ it needs THREE values!
I
> > don't use the OFFSITE functionality (yet), so I didn't pick it up
>
> until
>
> > now.
> >
> > So go back into the .map, and put
> > OFFSITE 0 0 0
> > You're 3.7+ (or 4.0 -- I haven't installed it yet) should be good to
>
> go.
>
> > Here is the latest .map file reference. It's my Bible, Part II.
> > http://mapserver.gis.umn.edu/doc/mapfile-reference.html
> >
> > Also, when you get down and dirty w/ MapScript, ALWAYS rely on the
> > documentation bundled w/ whatever source you download to build it.
> > Online UMN stuff is NOT reliable.
> >
> > Cache dir stuff. I borrowed this cron script from somewhere that
does
> > the job. I do not believe MapServer has a limit to the amount it
will
> > write to the cache, so it's up to us good admins to clean up
> > periodically.
> >
> > #! /bin/sh
> > #
> > # MapServer temporary file cleanup - run daily by cron
> > #
> > # Flush all files from /tmp/ms_tmp older than 6 hours (360 minutes)
> > #
> > find /tmp/ms_tmp -name "*.*" -amin +360 -exec rm -f {} \;
> > exit 0
> >
> > -----Original Message-----
> > From: Brock Murch [mailto:bmurch at seas.marine.usf.edu]
> > Sent: Monday, July 07, 2003 1:25 PM
> > To: Charlton Purvis
> > Subject: Re: adding RASTER Layer
> >
> > Charlton:
> > Did what you did ... and d/l'ed 3.6.5 ... used my same
> > configure_it.sh to get
> > the same build:
> > #!/bin/bash
> >
> > CC=gcc \
> > CFLAGS="-O3 -march=pentium4 -mmmx -msse -msse2 -mfpmath=sse" \
> > CXX=g++ \
> > CXXFLAGS="-O3 -march=pentium4 -mmmx -msse -msse2 -mfpmath=sse" \
> > ./configure \
> > -v \
> > --with-jpeg=/usr/local/hdf \
> > --with-gd=/usr/local/tmp/gd-2.0.15 \
> > --with-freetype=/usr/bin/freetype-config \
> > --with-libz=/usr/local/hdf \
> > --with-png \
> > --with-pdf \
> > --with-tiff=/usr/local/tmp/tiff-v3.6.0-beta2/libtiff/ \
> > --with-proj=/usr/local/tmp/proj-4.4.7 \
> > --with-gdal=/usr/local/bin/gdal-config \
> > --with-ogr \
> > --with-postgis \
> > --with-wfs \
> > --with-wmsclient \
> > --with-wfsclient \
> > --enable-debug
> >
> > Then did the tests and it appears to work fine so long as
> >
> > STATUS DEFAULT
> >
> > and not
> >
> > # STATUS ON
> >
> > So it would seem that the status keyword is the issue in 4.0B
> >
> > See:
> > http://www.imars.usf.edu/tutorial35/s1/s1ex1_test4.html
> >
> > and
> >
> > http://www.imars.usf.edu/tutorial35/s2/s2ex3_test1.html
> >
> >
> > What one can do bout this is ???
> >
> > Where is the best place to really get a feel for all the tags in the
>
> map
>
> > file
> > and what they mean?
> >
> > Also curious, as in a previous post. If you are using a cache dir,
how
> > much
> > will be written there and what cleans it up?
More information about the MapServer-users
mailing list