[Mapserver-users] Re: adding RASTER Layer
Brock Murch
bmurch at seas.marine.usf.edu
Tue Jul 8 11:34:38 EDT 2003
Oh ya, another quick note.
I dl'ed and compiled 3.6.6 and it works fine. Noticed that the home page
refers to:
Current Version: 3.6.6 (4.0 beta)
But the d/l section shows both. So 3.6.5 and 3.6.6 work fine. I guess 3.6.6 is
not 4.0 beta as one might think from what we see on the home page.
Brock
On Tuesday 08 July 2003 11:05 am, Brock Murch wrote:
> Charlton:
>
> Thanks for the try... does the list have any ideas? The error definately
> has to do with the raster layer:
>
> STATUS DEFAULT
>
> error_log output:
> > __START_LOG__
> > [Tue Jul 08 09:31:49 2003] [error] [client 131.247.136.204] Premature
> > end of
> > script headers: mapserv, referer:
> > http://www.imars.usf.edu/tutorial35/s2/s2ex3_test2.html
> > __END_LOG__
> >
> >
> >
> > I cannot duplicate any of your errors that seem to be cropping up w/
> > 4.0b. Upgrading to that would require me to upgrade my gdal libraries,
> > and I'm not quite ready to take that plunge. Wonder if that's it?
> >
> > Just for kicks, does running
> > gdalinfo /var/www/html/tutorial35/data/raster/shdrlfi020g_ugl.tif
> > give you back anything intelligible?
>
> gdalinfo /var/www/html/tutorial35/data/raster/shdrlfi020g_ugl.tif
> Driver: GTiff/GeoTIFF
> Size is 2066, 1023
> Coordinate System is `'
> Origin = (-98.607616,49.868450)
> Pixel Size = (0.009075,-0.009075)
> Metadata:
> TIFFTAG_SOFTWARE=IMAGINE TIFF Support
> Copyright 1991 - 1999 by ERDAS, Inc. All Rights Reserved
> @(#)$RCSfile: etif.c $ $Revision: 1.8 $ $Date: 2001/01/25 22:04:51Z $
> Corner Coordinates:
> Upper Left ( -98.6076164, 49.8684504)
> Lower Left ( -98.6076164, 40.5847254)
> Upper Right ( -79.8586664, 49.8684504)
> Lower Right ( -79.8586664, 40.5847254)
> Center ( -89.2331414, 45.2265879)
> Band 1 Block=2066x3 Type=Byte, ColorInterp=Palette
> Color Table (RGB with 256 entries)
> 0: 169,209,254,255
> 1: 156,197,236,255
> 2: 18,40,48,255
> 3: 32,60,56,255
> 4: 43,73,62,255
> 5: 53,84,66,255
> 6: 62,94,72,255
> 7: 70,101,76,255
> 8: 81,123,88,255
> 9: 77,108,80,255
> 10: 92,134,95,255
> 11: 94,137,96,255
> 12: 96,139,97,255
> 13: 3,6,3,255
> 14: 1,2,1,255
> 15: 6,11,6,255
> 16: 85,117,85,255
> 17: 82,112,81,255
> 18: 105,148,102,255
> 19: 12,21,11,255
> 20: 116,160,110,255
> 21: 91,122,87,255
> 22: 17,28,15,255
> 23: 123,167,114,255
> 24: 98,130,92,255
> 25: 24,37,21,255
> 26: 127,171,117,255
> 27: 95,125,88,255
> 28: 89,116,82,255
> 29: 103,133,95,255
> 30: 35,51,30,255
> 31: 106,138,97,255
> 32: 98,120,91,255
> 33: 4,7,3,255
> 34: 110,141,99,255
> 35: 111,142,100,255
> 36: 43,62,36,255
> 37: 52,72,43,255
> 38: 119,150,104,255
> 39: 114,144,100,255
> 40: 118,148,103,255
> 41: 116,146,102,255
> 42: 121,150,105,255
> 43: 102,128,87,255
> 44: 123,153,105,255
> 45: 125,155,107,255
> 46: 107,127,95,255
> 47: 107,133,90,255
> 48: 126,156,107,255
> 49: 128,158,109,255
> 50: 127,157,108,255
> 51: 124,153,106,255
> 52: 111,137,92,255
> 53: 130,158,109,255
> 54: 130,159,110,255
> 55: 114,140,94,255
> 56: 135,163,112,255
> 57: 132,159,110,255
> 58: 136,164,112,255
> 59: 135,163,111,255
> 60: 134,161,110,255
> 61: 133,160,110,255
> 62: 116,134,100,255
> 63: 118,142,96,255
> 64: 140,167,114,255
> 65: 139,166,114,255
> 66: 138,165,113,255
> 67: 72,90,53,255
> 68: 121,145,96,255
> 69: 125,149,99,255
> 70: 148,175,119,255
> 71: 145,172,117,255
> 72: 143,170,116,255
> 73: 142,168,115,255
> 74: 109,132,83,255
> 75: 127,151,100,255
> 76: 124,147,98,255
> 77: 145,171,116,255
> 78: 146,172,117,255
> 79: 147,172,118,255
> 80: 125,142,105,255
> 81: 85,104,62,255
> 82: 128,151,100,255
> 83: 151,176,119,255
> 84: 133,155,101,255
> 85: 134,156,102,255
> 86: 136,158,104,255
> 87: 130,152,100,255
> 88: 157,181,123,255
> 89: 153,177,120,255
> 90: 158,182,124,255
> 91: 155,179,122,255
> 92: 154,178,121,255
> 93: 95,113,68,255
> 94: 136,157,103,255
> 95: 160,184,124,255
> 96: 162,186,126,255
> 97: 156,179,122,255
> 98: 132,147,108,255
> 99: 143,164,106,255
> 100: 141,162,105,255
> 101: 142,163,106,255
> 102: 139,159,105,255
> 103: 165,188,127,255
> 104: 141,161,105,255
> 105: 147,167,109,255
> 106: 170,192,129,255
> 107: 136,150,110,255
> 108: 108,123,78,255
> 109: 149,168,110,255
> 110: 148,167,109,255
> 111: 146,165,108,255
> 112: 145,164,107,255
> 113: 149,167,110,255
> 114: 177,197,134,255
> 115: 141,154,113,255
> 116: 123,140,85,255
> 117: 151,169,110,255
> 118: 154,171,110,255
> 119: 159,176,114,255
> 120: 158,175,113,255
> 121: 156,173,112,255
> 122: 155,172,111,255
> 123: 153,170,110,255
> 124: 157,174,113,255
> 125: 117,129,84,255
> 126: 185,203,138,255
> 127: 162,178,114,255
> 128: 166,182,117,255
> 129: 164,180,116,255
> 130: 147,158,115,255
> 131: 150,161,118,255
> 132: 148,162,100,255
> 133: 164,179,115,255
> 134: 162,177,114,255
> 135: 166,181,117,255
> 136: 161,176,114,255
> 137: 172,185,119,255
> 138: 171,185,119,255
> 139: 169,183,118,255
> 140: 157,166,121,255
> 141: 154,163,119,255
> 142: 154,166,102,255
> 143: 176,189,121,255
> 144: 173,186,119,255
> 145: 180,192,123,255
> 146: 179,192,123,255
> 147: 178,190,122,255
> 148: 174,187,120,255
> 149: 127,135,93,255
> 150: 159,167,122,255
> 151: 161,171,106,255
> 152: 134,141,97,255
> 153: 139,146,102,255
> 154: 164,171,124,255
> 155: 165,172,125,255
> 156: 163,170,124,255
> 157: 161,168,123,255
> 158: 170,179,111,255
> 159: 187,197,125,255
> 160: 185,194,124,255
> 161: 182,192,124,255
> 162: 166,173,125,255
> 163: 190,199,127,255
> 164: 147,152,105,255
> 165: 170,175,127,255
> 166: 169,174,126,255
> 167: 171,176,128,255
> 168: 195,202,128,255
> 169: 174,179,129,255
> 170: 173,177,128,255
> 171: 159,163,120,255
> 172: 204,209,134,255
> 173: 200,205,132,255
> 174: 180,183,134,255
> 175: 179,182,133,255
> 176: 163,166,123,255
> 177: 211,214,137,255
> 178: 160,162,113,255
> 179: 177,179,130,255
> 180: 182,184,134,255
> 181: 179,181,133,255
> 182: 185,186,135,255
> 183: 184,185,134,255
> 184: 220,220,140,255
> 185: 170,170,119,255
> 186: 173,173,123,255
> 187: 189,189,138,255
> 188: 188,188,137,255
> 189: 186,186,136,255
> 190: 172,172,127,255
> 191: 194,192,139,255
> 192: 192,191,139,255
> 193: 191,190,139,255
> 194: 188,187,137,255
> 195: 171,170,126,255
> 196: 173,172,128,255
> 197: 182,179,127,255
> 198: 195,192,140,255
> 199: 178,176,129,255
> 200: 176,174,128,255
> 201: 179,177,131,255
> 202: 191,187,133,255
> 203: 204,199,144,255
> 204: 201,197,143,255
> 205: 183,179,133,255
> 206: 197,192,140,255
> 207: 199,194,142,255
> 208: 210,203,147,255
> 209: 187,181,134,255
> 210: 219,208,152,255
> 211: 227,214,156,255
> 212: 235,219,160,255
> 213: 244,225,165,255
> 214: 0,0,0,255
> 215: 255,255,255,255
> 216: 0,0,0,255
> 217: 0,0,0,255
> 218: 0,0,0,255
> 219: 0,0,0,255
> 220: 0,0,0,255
> 221: 0,0,0,255
> 222: 0,0,0,255
> 223: 0,0,0,255
> 224: 0,0,0,255
> 225: 0,0,0,255
> 226: 0,0,0,255
> 227: 0,0,0,255
> 228: 0,0,0,255
> 229: 0,0,0,255
> 230: 0,0,0,255
> 231: 0,0,0,255
> 232: 0,0,0,255
> 233: 0,0,0,255
> 234: 0,0,0,255
> 235: 0,0,0,255
> 236: 0,0,0,255
> 237: 0,0,0,255
> 238: 0,0,0,255
> 239: 0,0,0,255
> 240: 0,0,0,255
> 241: 0,0,0,255
> 242: 0,0,0,255
> 243: 0,0,0,255
> 244: 0,0,0,255
> 245: 0,0,0,255
> 246: 0,0,0,255
> 247: 0,0,0,255
> 248: 0,0,0,255
> 249: 0,0,0,255
> 250: 0,0,0,255
> 251: 0,0,0,255
> 252: 0,0,0,255
> 253: 0,0,0,255
> 254: 0,0,0,255
> 255: 0,0,0,255
>
> > Also, have you tried removing all but the raster layer from your .map?
>
> removed everthing but the raster layer no effect...
>
> > suggest you forward it to the list, and
> > I'm sure you'll get some folks to bite.
> >
> > From: Brock Murch [mailto:bmurch at seas.marine.usf.edu]
> > Sent: Tuesday, July 08, 2003 9:30 AM
> > To: Charlton Purvis
> > Subject: Re: adding RASTER Layer
> >
> > Charlton:
> > Actually that can't be it. Although I did try it earlier as this
> > was
> > suggested in a follow-up thread to my post to the list. See the
> > following...
> > with the relevant changes to the map file.
> >
> > This is using mapserv_4.0b
> >
> > http://www.imars.usf.edu/tutorial35/s2/s2ex3_test2.html
> > LAYER # Shaded Relief Raster
> > NAME "relief"
> > DATA "/var/www/html/tutorial35/data/raster/shdrlfi020g_ugl.tif"
> > STATUS DEFAULT
> > # STATUS ON
> > TYPE RASTER
> > # OFFSITE 0
> > END
> >
> > When I access the above webpage, I get this in the error_log:
> > __START_LOG__
> > [Tue Jul 08 09:31:49 2003] [error] [client 131.247.136.204] Premature
> > end of
> > script headers: mapserv, referer:
> > http://www.imars.usf.edu/tutorial35/s2/s2ex3_test2.html
> > __END_LOG__
> >
> > http://www.imars.usf.edu/tutorial35/s2/s2ex3_test3.html
> > LAYER # Shaded Relief Raster
> > NAME "relief"
> > DATA "/var/www/html/tutorial35/data/raster/shdrlfi020g_ugl.tif"
> > # STATUS DEFAULT
> > # STATUS ON
> > TYPE RASTER
> > # OFFSITE 0
> > END
> > No error in the error_log
> >
> > http://www.imars.usf.edu/tutorial35/s2/s2ex3_test4.html
> > LAYER # Shaded Relief Raster
> > NAME "relief"
> > DATA "/var/www/html/tutorial35/data/raster/shdrlfi020g_ugl.tif"
> > # STATUS DEFAULT
> > STATUS ON
> > TYPE RASTER
> > # OFFSITE 0
> > END
> > No error in the error_log
> >
> > Using mapserv_3.6.5 with the same map files as used above:
> >
> > http://www.imars.usf.edu/tutorial35/s2/s2ex3_test2_3.6.5.html
> > http://www.imars.usf.edu/tutorial35/s2/s2ex3_test3_3.6.5.html
> > http://www.imars.usf.edu/tutorial35/s2/s2ex3_test4_3.6.5.html
> >
> > As you can see this time with STATUS DEFAULT works in 3.6.5
> > (s2ex3_test2_3.6.5.html). This was the only change to the map files.
> > Both
> > versions of mapserv were compiled against the same libs with the exact
> > same
> > script:
> >
> > #!/bin/bash
> >
> > CC=gcc \
> > CFLAGS="-O3 -march=pentium4 -mmmx -msse -msse2 -mfpmath=sse" \
> > CXX=g++ \
> > CXXFLAGS="-O3 -march=pentium4 -mmmx -msse -msse2 -mfpmath=sse" \
> > ./configure \
> > -v \
> > --with-jpeg=/usr/local/hdf \
> > --with-gd=/usr/local/tmp/gd-2.0.15 \
> > --with-freetype=/usr/bin/freetype-config \
> > --with-libz=/usr/local/hdf \
> > --with-png \
> > --with-pdf \
> > --with-tiff=/usr/local/tmp/tiff-v3.6.0-beta2/libtiff/ \
> > --with-proj=/usr/local/tmp/proj-4.4.7 \
> > --with-gdal=/usr/local/bin/gdal-config \
> > --with-ogr \
> > --with-postgis \
> > --with-wfs \
> > --with-wmsclient \
> > --with-wfsclient \
> > --enable-debug
> >
> > On the bright side, I was able to use the ersi shapefiles in the
> > following
> > link along with our data with mapserv 3.6.5:
> >
> > http://www.imars.usf.edu/tutorial35/s1/s1ex1_test4.html
> >
> > Do you think this is a bug? Any ideas would be appreciated.
> >
> > Brock
> >
> > On Monday 07 July 2003 1:53 pm, you wrote:
> > > Brother Brock:
> > >
> > > It's always the obvious right under our noses that evades us! Look at
> > > the OFFSITE directive in your .map. In 3.7+ it needs THREE values! I
> > > don't use the OFFSITE functionality (yet), so I didn't pick it up
> >
> > until
> >
> > > now.
> > >
> > > So go back into the .map, and put
> > > OFFSITE 0 0 0
> > > You're 3.7+ (or 4.0 -- I haven't installed it yet) should be good to
> >
> > go.
> >
> > > Here is the latest .map file reference. It's my Bible, Part II.
> > > http://mapserver.gis.umn.edu/doc/mapfile-reference.html
> > >
> > > Also, when you get down and dirty w/ MapScript, ALWAYS rely on the
> > > documentation bundled w/ whatever source you download to build it.
> > > Online UMN stuff is NOT reliable.
> > >
> > > Cache dir stuff. I borrowed this cron script from somewhere that does
> > > the job. I do not believe MapServer has a limit to the amount it will
> > > write to the cache, so it's up to us good admins to clean up
> > > periodically.
> > >
> > > #! /bin/sh
> > > #
> > > # MapServer temporary file cleanup - run daily by cron
> > > #
> > > # Flush all files from /tmp/ms_tmp older than 6 hours (360 minutes)
> > > #
> > > find /tmp/ms_tmp -name "*.*" -amin +360 -exec rm -f {} \;
> > > exit 0
> > >
> > > -----Original Message-----
> > > From: Brock Murch [mailto:bmurch at seas.marine.usf.edu]
> > > Sent: Monday, July 07, 2003 1:25 PM
> > > To: Charlton Purvis
> > > Subject: Re: adding RASTER Layer
> > >
> > > Charlton:
> > > Did what you did ... and d/l'ed 3.6.5 ... used my same
> > > configure_it.sh to get
> > > the same build:
> > > #!/bin/bash
> > >
> > > CC=gcc \
> > > CFLAGS="-O3 -march=pentium4 -mmmx -msse -msse2 -mfpmath=sse" \
> > > CXX=g++ \
> > > CXXFLAGS="-O3 -march=pentium4 -mmmx -msse -msse2 -mfpmath=sse" \
> > > ./configure \
> > > -v \
> > > --with-jpeg=/usr/local/hdf \
> > > --with-gd=/usr/local/tmp/gd-2.0.15 \
> > > --with-freetype=/usr/bin/freetype-config \
> > > --with-libz=/usr/local/hdf \
> > > --with-png \
> > > --with-pdf \
> > > --with-tiff=/usr/local/tmp/tiff-v3.6.0-beta2/libtiff/ \
> > > --with-proj=/usr/local/tmp/proj-4.4.7 \
> > > --with-gdal=/usr/local/bin/gdal-config \
> > > --with-ogr \
> > > --with-postgis \
> > > --with-wfs \
> > > --with-wmsclient \
> > > --with-wfsclient \
> > > --enable-debug
> > >
> > > Then did the tests and it appears to work fine so long as
> > >
> > > STATUS DEFAULT
> > >
> > > and not
> > >
> > > # STATUS ON
> > >
> > > So it would seem that the status keyword is the issue in 4.0B
> > >
> > > See:
> > > http://www.imars.usf.edu/tutorial35/s1/s1ex1_test4.html
> > >
> > > and
> > >
> > > http://www.imars.usf.edu/tutorial35/s2/s2ex3_test1.html
> > >
> > >
> > > What one can do bout this is ???
> > >
> > > Where is the best place to really get a feel for all the tags in the
> >
> > map
> >
> > > file
> > > and what they mean?
> > >
> > > Also curious, as in a previous post. If you are using a cache dir, how
> > > much
> > > will be written there and what cleans it up?
>
> _______________________________________________
> Mapserver-users mailing list
> Mapserver-users at lists.gis.umn.edu
> http://lists.gis.umn.edu/mailman/listinfo/mapserver-users
More information about the mapserver-users
mailing list