[Marketing] Seal production

[Marc Vloemans]

Anita,

I honestly do not believe it is a matter of 'bothered'. In my case it happened to be a discussion/conversation which I fell into midway. I left it to the original participants as I did not feel I had to contribute anything.

The competition for a seal was new to me.  And the intended usage of the seal therefor still remains a mystery. Venka's remark only makes sense to me if the seal has an official status in terms of legally binding contracts.

I would not read too much into it. If you need help ordering locally please feel free to reach out for help. 

Vriendelijke groet,
Marc Vloemans


> Op 7 jul. 2016 om 12:02 heeft Anita Graser <anitagraser at gmx.at> het volgende geschreven:
> 
> Ok. I'll get a rubber one, since nobody bothered to answer my question about venka's concerns.
> 
> Anita
> 
> 
>> On Jul 6, 2016 23:39, "Marc Vloemans" <marcvloemans1 at gmail.com> wrote:
>> Anita et al,
>> 
>> I agree with Jody: this thread is costing more time than the actual purchase.
>> 
>> How many do you need ?
>> 
>> If one or two, please, order one locally and get reimbursement from Michael Smith. With  cost indication as Jody provided.
>> 
>> If more needed, what is the purpose? Official present or other ?
>> 
>> Vriendelijke groet,
>> Marc Vloemans
>> 
>> 
>>> Op 6 jul. 2016 om 22:38 heeft Jody Garnett <jody.garnett at gmail.com> het volgende geschreven:
>>> 
>>> Searching online show that that rubber seals cost $10-$30 (you can use an image for the design). I did not have too much luck looking for personal seals: http://www.thestampmaker.com/embossers.aspx not sure if this is what we want? $20-50 for an "embosser" ...
>>> 
>>> So we are having a high email / cost ratio on this one.
>>> 
>>> Marc can we make a motion or otherwise accept Anita's offer to get this done?
>>> 
>>> --
>>> Jody Garnett
>>> 
>>>> On 1 July 2016 at 12:49, Anita Graser <anitagraser at gmx.at> wrote:
>>>> 
>>>> 
>>>>> On Fri, Jul 1, 2016 at 9:33 PM, Jody Garnett <jody.garnett at gmail.com> wrote:
>>>>> Not sure of a good answer here, think we need to find out who can produce seals look at the cost difference between wood/rubber/metal and see if there is still time to source a seal before foss4g. It would be nice to present the seal to our president in the AGM for example.
>>>>> 
>>>>> I would recommend reaching out to Helena and/or Micheal for actual purchase (since Micheal could pay the provider directly). Or if it is not very much someone could purchase and then be reimbursed. Or if there is not much time perhaps source it in Germany?
>>>> 
>>>> ​Is rubber still an option for us if - as Venka noted - rubber seals are not accepted as "official" in some countries?
>>>> 
>>>> Will the marketing committee reach out to Helene/Michael or should I go ahead in order to hopefully get it done by August? 
>>>> 
>>>> Best wishes,
>>>> Anita
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osgeo.org/pipermail/marketing/attachments/20160707/39e2b2dd/attachment.html>