[Marketing] Seal production

[Anita Graser]

Thank you Marc! If you already know a good shop to order one, that would be
great because it would save me time to look for one.

Best wishes
Anita
On Jul 7, 2016 12:14, "Marc Vloemans" <marcvloemans1 at gmail.com> wrote:

> Anita,
>
> I honestly do not believe it is a matter of 'bothered'. In my case it
> happened to be a discussion/conversation which I fell into midway. I left
> it to the original participants as I did not feel I had to contribute
> anything.
>
> The competition for a seal was new to me.  And the intended usage of the
> seal therefor still remains a mystery. Venka's remark only makes sense to
> me if the seal has an official status in terms of legally binding contracts.
>
> I would not read too much into it. If you need help ordering locally
> please feel free to reach out for help.
>
> Vriendelijke groet,
> Marc Vloemans
>
>
> Op 7 jul. 2016 om 12:02 heeft Anita Graser <anitagraser at gmx.at> het
> volgende geschreven:
>
> Ok. I'll get a rubber one, since nobody bothered to answer my question
> about venka's concerns.
>
> Anita
>
> On Jul 6, 2016 23:39, "Marc Vloemans" <marcvloemans1 at gmail.com> wrote:
>
>> Anita et al,
>>
>> I agree with Jody: this thread is costing more time than the actual
>> purchase.
>>
>> How many do you need ?
>>
>> If one or two, please, order one locally and get reimbursement from
>> Michael Smith. With  cost indication as Jody provided.
>>
>> If more needed, what is the purpose? Official present or other ?
>>
>> Vriendelijke groet,
>> Marc Vloemans
>>
>>
>> Op 6 jul. 2016 om 22:38 heeft Jody Garnett <jody.garnett at gmail.com> het
>> volgende geschreven:
>>
>> Searching online show that that rubber seals cost $10-$30 (you can use an
>> image for the design). I did not have too much luck looking for personal
>> seals: http://www.thestampmaker.com/embossers.aspx not sure if this is
>> what we want? $20-50 for an "embosser" ...
>>
>> So we are having a high email / cost ratio on this one.
>>
>> Marc can we make a motion or otherwise accept Anita's offer to get this
>> done?
>>
>> --
>> Jody Garnett
>>
>> On 1 July 2016 at 12:49, Anita Graser <anitagraser at gmx.at> wrote:
>>
>>>
>>>
>>> On Fri, Jul 1, 2016 at 9:33 PM, Jody Garnett <jody.garnett at gmail.com>
>>> wrote:
>>>
>>>> Not sure of a good answer here, think we need to find out who can
>>>> produce seals look at the cost difference between wood/rubber/metal and see
>>>> if there is still time to source a seal before foss4g. It would be nice to
>>>> present the seal to our president in the AGM for example.
>>>>
>>>> I would recommend reaching out to Helena and/or Micheal for actual
>>>> purchase (since Micheal could pay the provider directly). Or if it is not
>>>> very much someone could purchase and then be reimbursed. Or if there is not
>>>> much time perhaps source it in Germany?
>>>>
>>>
>>> ​Is rubber still an option for us if - as Venka noted - rubber seals are
>>> not accepted as "official" in some countries?
>>>
>>> Will the marketing committee reach out to Helene/Michael or should I go
>>> ahead in order to hopefully get it done by August?
>>>
>>> Best wishes,
>>> Anita
>>>
>>>
>>>
>>> ​
>>>
>>>
>>>
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osgeo.org/pipermail/marketing/attachments/20160707/5d0173c2/attachment-0001.html>