[postgis-users] [PostGIS] Make error in building PostGIS 2.0

[Paragon Corporation]

compiling geojson on mingw is tricky. 

Did you try configure as the
http://trac.osgeo.org/postgis/wiki/DevWikiWinMingWSys_20 instructions
suggested with CFLAGS=-w

./configure --prefix=/c/projects/json-c/rel-0.9 CFLAGS=-w

I think I ran into similar issues without using the -w flag.

Hope that helps,
Regina
http://www.postgis.us

Pledge "postgis64windows"

"I will work on building a 64-bit PostGIS Windows but only if 20 other
people will put in $100 USD for the effort." 
http://www.pledgebank.com/postgis64windows
 

> -----Original Message-----
> From: postgis-users-bounces at postgis.refractions.net 
> [mailto:postgis-users-bounces at postgis.refractions.net] On 
> Behalf Of GeoFox
> Sent: Tuesday, February 14, 2012 6:25 PM
> To: postgis-users at postgis.refractions.net
> Subject: [postgis-users] [PostGIS] Make error in building PostGIS 2.0
> 
> Hi everyone,
> 
> I am try to build PostGIS 2.0 on Windows.  After following 
> the first 17 steps in the instruction manual, I am getting 
> the following error while running 'make' for PostGIS 2.0 alaph5.
> 
> make[1]: *** [lwgeom_in_geojson.o] Error 1
> 
> There is no error during ./configure
> 
> I did some research online but could not find anything useful.
> 
> Greatly appreciate if anyone can give advice on this issue.
> 
> Thanks.
> 
> -----
> Edison Tam
> NGC SWE
> US
> --
> View this message in context: 
> http://postgis.17.n6.nabble.com/PostGIS-Make-error-in-building
-PostGIS-2-0-tp4470575p4470575.html
> Sent from the PostGIS - User mailing list archive at Nabble.com.
> _______________________________________________
> postgis-users mailing list
> postgis-users at postgis.refractions.net
> http://postgis.refractions.net/mailman/listinfo/postgis-users
>