[GeoNode-devel] Geonode in vagrant

[Toni Schönbuchner]

Dear Pieter,

the workflow is like this:

1) Spin a plain vagrantbox from Ubuntu base box
	https://gist.github.com/t-book/7bafe00d0e0ca1be5669ecbf5e0d6e84 <https://gist.github.com/t-book/7bafe00d0e0ca1be5669ecbf5e0d6e84>
	$ vagrant up
	$ vagrant ssh
	$ sudo apt install python
2) install ansible on your host
3) clone the ansible repository I´ve sent
4) adjust the vars as explained in the readme
	https://github.com/csgis/geonode_ansible#installing <https://github.com/csgis/geonode_ansible#installing>
5) Run the playbook with: $ ansible-playbook -v -i hosts site.yml

Voila ansible should install geonode 2.10 at your vanilla vagrant box ;)

Best regards,

Toni

> Am 14.02.2019 um 11:57 schrieb Pieter du Plooy <pjduplooy.gis at gmail.com>:
> 
> Toni
> 
> Can I use ansible inside a vagrant box?
> 
> On Thu, Feb 14, 2019 at 12:41 PM Pieter du Plooy <pjduplooy.gis at gmail.com <mailto:pjduplooy.gis at gmail.com>> wrote:
> Hi Toni
> 
> A video would be much appreciated.
> 
> On Thu, Feb 14, 2019 at 11:27 AM Toni Schönbuchner <toni.schoenbuchner at csgis.de <mailto:toni.schoenbuchner at csgis.de>> wrote:
> Dear Pieter,
> 
> I´m currently on travel but can share a vagrant box next week when back in office.
> 
>> Is it possible that you might have a documentation set that I can print and then follow from there?(I follow that better).  I want to see why things are done in a certain way.
> 
> Well this should be covered by documentations. Unfortuantely it´s a bit outdated.
> A rework is on my list for a long time. Until then you´re welcome to ask why something is
> happening when.
> 
>> Your guidance would be appreciated.  (On a side note I have been using your vagrant box since you pushed it to Vagrant Cloud.  I also prefer Vagrant over Docker, since I feel I have more control, and can then experiment more).
>> 
>> But the time has now come for me to build a box by myself, so your guidance will be appreciated.
> 
> 
> +1 
> The ansible playbook I´ve sent will do exactly that. You can spin your vagrant box from
> ubuntu image. Configure vars like IP, user etc and ansible will run all needed commands.
> The nice part about it is that they stay very close to the official docs. It should be easy
> to understand the ansible tasks also knowing nothing about it. If you want I can
> share a video guiding you through relevant steps.
> 
> Cheers,
> 
> Toni
> 
> 
>> Am 14.02.2019 um 03:39 schrieb Pieter du Plooy <pjduplooy.gis at gmail.com <mailto:pjduplooy.gis at gmail.com>>:
>> 
>> Thanks Toni
>> 
>> Would be much appreciated.
>> 
>> I was trying to follow your Geonode 2.8 vagrant video, but am struggling to jump between pausing the video, and then actually following the tasks (Just a personal issue). 
>> 
>> Is it possible that you might have a documentation set that I can print and then follow from there?(I follow that better).  I want to see why things are done in a certain way.
>> 
>> Your guidance would be appreciated.  (On a side note I have been using your vagrant box since you pushed it to Vagrant Cloud.  I also prefer Vagrant over Docker, since I feel I have more control, and can then experiment more).
>> 
>> But the time has now come for me to build a box by myself, so your guidance will be appreciated.
>> 
>> Pieter
>> 
>> 
>> 
>> On Wed, Feb 13, 2019 at 10:10 PM Toni Schönbuchner <toni.schoenbuchner at csgis.de <mailto:toni.schoenbuchner at csgis.de>> wrote:
>> Dear Pieter,
>> 
>> for 2.10 on 16.04 you could just use the master branch (ansible) for installation
>> https://github.com/csgis/geonode_ansible/tree/master <https://github.com/csgis/geonode_ansible/tree/master>
>> 
>> For  2.10 on bionic:
>> https://github.com/csgis/geonode_ansible/tree/bionic <https://github.com/csgis/geonode_ansible/tree/bionic>
>> 
>> In case of questions I´m happy to guide you.
>> 
>> And yes of course I would be prepared to push a box to 
>> vagrant cloud as well ;)
>> 
>> Cheers,
>> 
>> Toni
>> 
>>> Am 13.02.2019 um 21:00 schrieb geonode-devel-request at lists.osgeo.org <mailto:geonode-devel-request at lists.osgeo.org>:
>>> 
>>> Message: 2
>>> Date: Wed, 13 Feb 2019 17:40:59 +0200
>>> From: Pieter du Plooy <pjduplooy.gis at gmail.com <mailto:pjduplooy.gis at gmail.com>>
>>> To: geonode-devel at lists.osgeo.org <mailto:geonode-devel at lists.osgeo.org>
>>> Subject: [GeoNode-devel] Geonode in vagrant
>>> Message-ID:
>>> 	<CADsUavHt8_z6G2mN44DT_XFoKShw2-br7-NyE-d1qdyGSbZyqg at mail.gmail.com <mailto:CADsUavHt8_z6G2mN44DT_XFoKShw2-br7-NyE-d1qdyGSbZyqg at mail.gmail.com>>
>>> Content-Type: text/plain; charset="utf-8"
>>> 
>>> Hi guys
>>> 
>>> I would like to ask if Toni is prepared to update the Vagrant box to have
>>> Geonode 2.10?
>> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osgeo.org/pipermail/geonode-devel/attachments/20190214/5295d2b6/attachment.html>